Halo Triton Help

[tom.tom]

Hi guys,

I just got my Halo Triton vape in the mail. I followed all the instructions and filled up the cartomizer with e-liquid. When I screw it into the battery and press the button, I am unable to draw/inhale from the thing. It feels like someone plugged it up. When i unscrew it the cartomizer from the battery, I can inhale through it so there seems to be a clear for the cartomizer.

Its only when I screw in the battery that it wont let me pull.

Am i missing something or did i just get a fault cartomizer?

When I screw in my cartomizer from the halo g-6 ecig, it works fine.

Any help?

 

[SmoKnoMoCigZ]

if you bought the starter kit you will have 2 tanks, try the other one and see if it works.

 

[tom.tom]

Hey, thanks for the quick reply. I didn't buy the starter kit, as I already bought the g6 starter kit. I only purcahsed the Triton cartomizer and the triton battery.

Any other suggestions? It loks like maybe I just got a fault one? anyone else have this issue?

 

[Zactaylorswag]

I have had the happen before I just got a paper towel and wiped off the battery and the part of the tank that your screw on to the battery try that it worked for me I hope it works for you because I love my Triton. Good Luck

 

[tom.tom]

Just tried that, no luck.

i guess this problem isnt to common?

 

[BigBen2k]

Take the tank off the battery, and look under the tank (you can flip it over, it won't leak).

The center post, is supposed to have a groove in it, to let the air through. Do you see it?

Otherwise, if you look at the base of the tank, there should be two holes drilled across; you have to keep those clear (I've put my fingers on them multiple times).

 

[tom.tom]

yep, there are grooves on the bottom and I am not covering the holes.

Is it ok to use the G6 cartormizers with the triton battery?

 

[BigBen2k]

Yes, you can use the G6 carto on Triton. You can use the minitank too (I do).

There should be only one groove in that center post, right across the center hole.

Also, check if the two outside holes are clear; sometimes manufacturing isn't very thorough.

 

[tom.tom]

interesting, there are actually a bunch of grooves on the bottom of the tank, around 4 or so. They are not very deep cuts either.

How is Halo's return policy like? I'm thinking of just returning the whole thing and grab a mini tank and use it with my g6.

 

[BigBen2k]

The tanks' not returnable, unless it's got a manufacturing defect, which I suspect you have.

The grooves you mention, are those the thread that's used to screw the tank to the battery? The two outer holes should run right through those. In fact, you should see light coming through both holes.

But it's the center post that's probably the problem; if it's not grooved, it sits flat against the battery post, and just blocks the center hole.