HANA MODZ DNA 30 Clone arrived today from FT.

Status
Not open for further replies.

ssgswjohnson

Senior Member
ECF Veteran
Mar 3, 2014
78
61
Fort Meade, MD
So I ordered a black 18650 variety and a fogger for it. Both are in transit already (ordered on 30th...late). I know its a long wait so I'm trying to forget about it... and not doing real well with that.
Ordered my wire and wick from viper vape and with the fogger, will be making the jump from an aero tank and ego style vv's, to a 30w APV and an rba tank. I seemed to get bored quickly after my last purchase so I figured I would jump in over my head to stay engaged longer...

Probably get a cheap dripper soon too.

Sent from my DROID BIONIC using Tapatalk
 

ssgswjohnson

Senior Member
ECF Veteran
Mar 3, 2014
78
61
Fort Meade, MD
I just got my FT DNA30 and it only took 12 days total to get to Texas. 10 days for shipping. Not like it used to be. I had 1 order that took 31 days to get to me.
Really?! That's fantastic flipping news! Now I can raise my expectations a notch. On an unrelated note, I miss Texas. Lived in centex for six years.

Sent from my DROID BIONIC using Tapatalk
 

Buster282

Super Member
ECF Veteran
Verified Member
May 11, 2014
397
741
FL USA
Well.. my new toy took a dump! It quit firing! Worked great for a few days. I think it's the 510 pin not making proper contact. I adjusted it till I was blue in the face. It's so small and very loose in the threads. Press the button and nothing, just a faint hum. Oh well just opened a ticket with FT. They have good service just a long way away. :(
 

Vaponators

Senior Member
ECF Veteran
Verified Member
Jul 10, 2012
160
207
Florida
Well.. my new toy took a dump! It quit firing! Worked great for a few days. I think it's the 510 pin not making proper contact. I adjusted it till I was blue in the face. It's so small and very loose in the threads. Press the button and nothing, just a faint hum. Oh well just opened a ticket with FT. They have good service just a long way away. :(

DARN! Sorry to hear about that Buster. That stinks. I hope they resolve it for you quickly. I noticed that mine was loose in the threads as well but it has been making contact without any problems. How long have you had it?
 

Vaponators

Senior Member
ECF Veteran
Verified Member
Jul 10, 2012
160
207
Florida
DNA30 Mini ordered on July 21st, processed by Fasttech on the 22nd, arrived at my house Aug 4th. 14 days from order!! :D

Not bad GMayberry. That sounds about right. I haven't had any orders that took more than 2 weeks to arrive from FT. How are you liking it so far? I was considering getting one after seeing the performance of my full size DNA30. Quite happy with it.
 

GMayberry

Super Member
ECF Veteran
Verified Member
Apr 28, 2014
776
378
Virginia
Not bad GMayberry. That sounds about right. I haven't had any orders that took more than 2 weeks to arrive from FT. How are you liking it so far? I was considering getting one after seeing the performance of my full size DNA30. Quite happy with it.

So far I am loving it. I recieved the "attempted delivery" notice yesterday, and went to the post office and picked it up this morning before work. I have been using it like a champ at 17.5 watts wrapped at 1.4Ω all morning and it is amazing! I just put it on to charge a few minutes ago. The charging light is visible, and it appears to be slightly finicky, but I removed and inserted the charger again and it is charging just fine. It may just be the cable, not the port.

is it just me, or does it seem as though you are more likely to NOT have issues with the mini? I seem to hear more horror stories about the 18650.

I am assuming you mean with shipping, not with usage right? I have heard of long shipping times with the 18650 models, but not so much with the mini. It all comes down to batteries going through customs. All I can figure is that when scanned, the 18650 is obviously a battery, and the lipo, I guess, doesn't always "appear" to be a battery to the ones scanning the packages, so it doesn't go through the same scrutiny as the 18650's so it goes right through.

All of my "non-battery" purchases from FT have arrived between 14 and 20 days. This was actually my fastest delivery to date from them. And it was the one I was anxiously awaiting, so I am glad it was the fastest! Typically, I order from FT and forget about it until it arrives, this one.... I couldn't get it out of my head!! :D
 

herb

Vaping Master
ECF Veteran
Mar 21, 2014
4,850
6,723
Northern NJ native , Coastal NC now.
So far I am loving it. I recieved the "attempted delivery" notice yesterday, and went to the post office and picked it up this morning before work. I have been using it like a champ at 17.5 watts wrapped at 1.4Ω all morning and it is amazing! I just put it on to charge a few minutes ago. The charging light is visible, and it appears to be slightly finicky, but I removed and inserted the charger again and it is charging just fine. It may just be the cable, not the port.



I am assuming you mean with shipping, not with usage right? I have heard of long shipping times with the 18650 models, but not so much with the mini. It all comes down to batteries going through customs. All I can figure is that when scanned, the 18650 is obviously a battery, and the lipo, I guess, doesn't always "appear" to be a battery to the ones scanning the packages, so it doesn't go through the same scrutiny as the 18650's so it goes right through.

All of my "non-battery" purchases from FT have arrived between 14 and 20 days. This was actually my fastest delivery to date from them. And it was the one I was anxiously awaiting, so I am glad it was the fastest! Typically, I order from FT and forget about it until it arrives, this one.... I couldn't get it out of my head!! :D


Almost positive he means usage .
 

herb

Vaping Master
ECF Veteran
Mar 21, 2014
4,850
6,723
Northern NJ native , Coastal NC now.
Sorry, yeah I meant usage. Seems like I've read of a lot more issues out of them... to the point I'm wondering if I should have put my order in for the mini. I could be wrong though and I may be paranoid...

Sent from my DROID BIONIC using Tapatalk


The V3's FT is shipping now have had 99% very very positive talk , most of the issues you read about FT models are older and especially the old ones with the seam across the top.
 

Vaponators

Senior Member
ECF Veteran
Verified Member
Jul 10, 2012
160
207
Florida
Originally Posted by GMayberry View Post
So far I am loving it. I recieved the "attempted delivery" notice yesterday, and went to the post office and picked it up this morning before work. I have been using it like a champ at 17.5 watts wrapped at 1.4Ω all morning and it is amazing! I just put it on to charge a few minutes ago. The charging light is visible, and it appears to be slightly finicky, but I removed and inserted the charger again and it is charging just fine. It may just be the cable, not the port.

Great. I'm glad it's working well for you. Based on my experience with the 18650 in this thread, other reviews and your initial positive observations on yours, I think it might be safe to say that the V3 is a solid unit.
 

armadillo

Super Member
ECF Veteran
Verified Member
Jul 5, 2010
600
844
Honolulu
I just got my mini V3 today. Ordered on the 22nd while it still said "shipping in 10 days". Got notification it shipped on the 29th and was out for delivery yesterday. Since I wasn't home, I had to pick it up today.

Battery was 2/3 full but I charged it and now run a Mega tank on it (I had to slightly screw the 510 pin in the mini to make it sit flush). The unit is black and absolutely flawless. The buttons and display are flawless as well. I am pretty nitpicky, but I really cannot find anything wrong with the unit.

I opened the back and I am amazed how clean it is. I was expecting lots of glue, but I can't see any. All the cables are neatly aligned and I can see almost the entire board. Comparing the Ohms with my MVPs, I tried two tanks and one had identical reading on MVP @2.2Ohm and the other was 2.1Ohm on MVP and 2.2Ohm on the mini. I then compared vape experience at identical settings and the mini is simply perfect. I really did not expect this at all.

I originally planned to gut it and replace with DNA30, but now I'm not sure whether I should just go with it for a while. I will see how long the bliss lasts and may do that if and when this board fails. But boy, am I pleasantly surprised by this thing.
 

Vaponators

Senior Member
ECF Veteran
Verified Member
Jul 10, 2012
160
207
Florida
yea Vapon I've had it a lil over a week. worked great for 4 or 5 days. disappointing. still waitin on them to respond with an RA#. back to the ole Vamo! :confused:


That really stinks Buster. I feel for ya man. At least you have a backup vape in the meantime but I'm sure it's till disappointing. Any luck with customer service yet? Are they going to replace it for you?
 
Status
Not open for further replies.

Users who are viewing this thread