Haze RDA builds

[lgooding20]

I got an IPV2S with a haze rda. Currently I'm running a .5 ohm dual micro at 8 wraps and 2mm diameter.
I'm looking for other builds I can get clouds from. I have 26 and 22 gauge kanthal and I can build at any diameter.
Just looking for suggestions on different builds for this setup.
I also have a CLT V1 if that's any better for clouds

 

[slayerr]

I have a haze rda and also a ipv2.1 its the updated ipv2 has floating 510, battery ribbon, better screws and other upgrades. I use my haze on my ipv2 with 24 gauge kanthal, 7wraps 3 mm inner diameter. Or 8 wraps 2.5 mm. I also have a troll rda I use on my sigelei 150 with 22 gauge 7 wrap 3 mm or 8 wrap 2.5 mm. I think the ipv you have is 60 or 70 watts right? Single battery. Your 22g will give more clouds then 26 obviously. You could try 22g 7 or 8 wrap on 2.5 or 3 mm. Your single battery will die quick though. Thats why i use 22 gauge .2 builds on my sigelei. But i love my ipv2 also.. i only use 24 gauge on it reads .3 on my ipv. Max it out at 50 watts. But id say try 7 wraps on 3 mm or 8 wraps on 2.5 mm. Thats a .2 ohm build. Max your ipv out to 70 watts if thats the max if its only 60watts id say get 24 gauge.

 

[slayerr]

Also im unfamiliar with the clt but if it has more airflow it will give more clouds. Also get a chuff cap for your haze if you dont already have one. Allows you to move more air through

 

[lgooding20]

It goes to 70 watts. I'll try a 22g build on it. I also got a mutation v4 mini today and that sure makes clouds