Is that Tat Chinese for Adam's Apple?
Naw kat, it's a Mudagram, a logo from the band Mudvayne.- Status
Naw kat, it's a Mudagram, a logo from the band Mudvayne.
On the bench today is a Darwin. After that another Cobalt. With one more on the way. I really do like these cobalts. Nice and small units. If anyone is looking to get rid of one, I'm in the market.
Hey kenom, got my shellz today and all I can say is WOWZERZZZ!!! The pics really do not do your work justice, I mean, these are absoulutly GOURGEOUS
As soon as I can get ahold of some standard IHy tubes, they're headed your way. Thanks again for the awesome work!!!
The dragon was wicked too
Thankz!!
As soon as I can get ahold of some standard IHy tubes, they're headed your way. Thanks again for the awesome work!!!The dragon was wicked too
Thankz!!
I make ecigs out of those dragons. I have "plans" of making a mold and then increasing the size of the dragons so that they can be used for a 14500 or 10440 host from them. Nothing special just a plain old automatic.
Thats Wicked!! Maybe I better get a hold of tubes QUICK(anybody got any????) to send you and order up one of these dragons as well if its possible
well, I've got so many other coals in the fire that the dragon idea was kind of put on the back burner. primarily because, I'd have to learn how to paint on those sculptures and I'm not really that much of an artist. Just a single tone isn't pretty enough.
I was originally going to make a casting of the original dragons. Then pour some expanding cast material to expand the overal design up to 100% it's original size. From there I can make another mold of my increased dimensional part and cast resin parts from that.
Industrial Polymers | : Industrial Polymers
As you can see, there isn't a lot of room to insert a battery inside there, but I do occasionally succeed. It's a simple 160mah auto battery.
This is the dragon sets I PLANNED on getting, but they were out of stock, so now I give them away to everyone that utilizes my services as a free gift.
Just a single tone isn't pretty enough.I was originally going to make a casting of the original dragons. Then pour some expanding cast material to expand the overal design up to 100% it's original size. From there I can make another mold of my increased dimensional part and cast resin parts from that.
Industrial Polymers | : Industrial Polymers
As you can see, there isn't a lot of room to insert a battery inside there, but I do occasionally succeed. It's a simple 160mah auto battery.
This is the dragon sets I PLANNED on getting, but they were out of stock, so now I give them away to everyone that utilizes my services as a free gift.
Last edited:
Newest pieces Iv'e just finished.
Darwin
The anodizing inside the shells was left intact because apparently type II anodizing isn't as good an insulator as type III (I call B.S.)
Darwin
The anodizing inside the shells was left intact because apparently type II anodizing isn't as good an insulator as type III (I call B.S.)
Last edited:
I got the vinyl printed today for your Cobalt JollyRogers, I'll start anodizing today and hopefully laser engrave tomorrow. (sadly I have to go by his timetable and he's rather busy with christmas)
I got a pink slip from the mail lady.. thought it was our iHy tubes, turned out to be something else. =( Can't go to the post office yet, found out the car has a flat tire when I tried.
/sigh
/sigh
I'm really beginning to get worried about that package fisty! I really wish I had the receipt still so I could at least see that it went to the right state.
Just finishing up working on the latest Zen Cobalt that came my way for JollyRogers.
It's color is BLACK cherry, and the heart and dots are the start of the flag he took as his new avatar.
This is not the finished product. We still have the skeleton to laser engrave as well as the words on the bottom "NO QUARTER"
it's gonna be sick looking!
It's color is BLACK cherry, and the heart and dots are the start of the flag he took as his new avatar.
This is not the finished product. We still have the skeleton to laser engrave as well as the words on the bottom "NO QUARTER"
it's gonna be sick looking!
Yeah, I'm starting to get kind of upset about it. I don't have anything else for Tore for Christmas.. I figured a $300 PV would be more than enough, but at this rate I will have nothing. =( I guess I can lend him my red tubes and hope the awesome ones get here eventually.
If we don't find out something by the end of the week, I'll do up my own personal Ihybrid and ship it to you.
Nah, it's not your fault.. it's the post office, it's the 2nd package they've lost for a while. The previous one I did finally get but it was 5 weeks late.
it's no big deal, when the others arrive, swap em out and send the originals back to me and I'll strip em and do em like I want. I don't want you out a present because of usps. The only reason I want mine back is they are not the 7075 alloy but instead 6061. I'm glad that faceless has started using 6061 for his tubes instead of that horrible 7075. The one advantage is, 7075 is very durable for aluminum.
Plus it IS kind of my fault for not including delivery confirmation. EVERY single other package I've shipped out with the exception of yours and one other has had delivery confirmation, so this is a learning experience for me. BTW both that DIDN'T have delivery confirmation have taken FOREVER to arrive.
Plus it IS kind of my fault for not including delivery confirmation. EVERY single other package I've shipped out with the exception of yours and one other has had delivery confirmation, so this is a learning experience for me. BTW both that DIDN'T have delivery confirmation have taken FOREVER to arrive.
Nah, too much work for you.. I have 2 sets of anodized tubes, I can lend him one if need be.
well I'd rather have a little work than an upset customer! When I weigh the two, the scales tip heavily in the upset customer loses catagory. So, whatever it takes, I'll step up and do eet!
You have little mouths to feed, we don't have to pay the postal service any more money than they already got for a crappy job.
I just now finished a BAM that I have been working on for in excess of a month. The doggone masking we wanted to do was giving us nothing but headaches. Finally the vinyl shop did what I initially told them to do and it came out perfectly IMO. I cannot post pictures of it yet until the customer approves it, but suffice it to say, it's a rather eye raising piece.
- Status
Similar threads
- Locked
- Locked
- Locked
