Hello everyone .New Here and could use some advice with Flavored nic combine,

Status
Not open for further replies.
I have 125ML of 100mg nic that already has 25%pg / 100%vg in it that I bought from MFS. All I want to do is make a 20ml bottle of 6mg nic and add 20% of a a diy flavor which is 100% PG (Yea I know its confusing) I have mixed unflavored nic before with the calculator etc but this is confusing me with the combined vg and pg added to the nic already before mixing. So how can I input this into a calculator or give me a hint on how to do this or am I making this more than it really is like I usually do. I don't even mind leaving the mix the way it is ie 25/75 . Diluting the 100mg nic with the vg/pg added to get 6mg is the confusing part to me and obviously I am not going to play around with that much nic even though its already got the pg/vg in it..

could someone help me please with sugar on top lol. I know this isn't in the right category but I am new here and mostly just read but since i am starting to DIY a little more I will become more active.
 

Rickajho

ECF Guru
ECF Veteran
Verified Member
Apr 23, 2011
11,841
21,763
Boston MA
Hi

Well, yall gotta start some place on ECF and all topics get addressed at the New Members level so - no problems.

First, what calculator are you using? This shouldn't be that hard to do if your bigger concern is getting to 6 mg, but aren't all that concerned about the exact PG/VG ratio you will end up at. Regardless, we need to know which calculator you are staring at on your end of things first.
 
which calculator you are staring at on your end of things first.

I am using the ejuice me up Calc
Ejuice meUp.jpg

Thanks for the quick response and reply
 

readeuler

Ultra Member
ECF Veteran
Verified Member
Jul 17, 2014
1,203
1,945
Ohio, USA
There were a lot of numbers floating around in an odd manner (25%PG and 100% VG? In a single thing?).

I could help, if you could provide some more clear info.

What is your goal? 6mg/ml liquid, but what percentage PG and VG?

What are you mixing together? What is the current nicotine level (mg/ml), and PG/VG ratio of each thing you're mixing?

I would be happy to break down the calculation process in a reply, but I can't find the above info in your post.
 
ok I have attached few images for clarifications.

100MG Nicotine and already has 25%PG and 75%VG mixed in ( see pics). that's what I am working with.I want to use that 100mg nic and add DIY ejuice I bought at the store locally that is 100%PG no nic in it. I would like to make a 20 ML bottle at 6mg either at 25/75 PG/VG which is currently in the Nic to make things easier or if at all possible 40/60 PG/VG,. I Dont think I am explain it right cause I seem to confuse everyone and myself everytimeLOL.:vapor:

25_75PGVG.jpg
100mg nic.jpg
 
eJuice Me Up is not my favorite calculator, but I have it, and it looks like what you need is under Tools/Nic Combine. You can enter the PG/VG ratio and then click to put that back into the main screen and figure from there.

I actually tried that Amoret but even though I put that information in there it still doesn't add it right or at least to my knowledge.. What calculator do you recomend?
 

wjosephsimmons

Senior Member
ECF Veteran
Verified Member
Nov 27, 2013
228
357
City of Angels
I have e-juice-me-up too, and I didn't care for it either. But there is this online calculator website that I think makes it a lot easier to figure this stuff out:

Do It Yourself E-Liquid (E-Juice) Recipe Mixing Station!

Look at all the variations of calculators in the column on the left. You should find one that will work the best for what you want to do.

HTH
 

wjosephsimmons

Senior Member
ECF Veteran
Verified Member
Nov 27, 2013
228
357
City of Angels
OK Simmons, I will give it a shot., I was hoping the genius of the forums would read my post LOL. could someone pass the word on because I know I will be to scared to vape any of that nic until I figure this out :p

What do you mean? I am the genius of these forums!!!

But seriously, it sounds like the DIY E-Liquid Calculator Ten Flavors Plus PG/VG Adjusting is the one you want. Give yourself a little time to work out how to use it; once you understand, it's easy.
 
What do you mean? I am the genius of these forums!!!

OK so after using that calculator I have decided that you are a genius by pointing me to that website. I am including a screenshot of the results. The only question I have now is with those results does that mean I need to add additional VG/PG. I know this is probably a stupid question but the only reason why I ask is because the VG/PG included in the nicotine . Anyways thanks for your help regardless.

combine nic6mg.jpg
 
Last edited:

wjosephsimmons

Senior Member
ECF Veteran
Verified Member
Nov 27, 2013
228
357
City of Angels
OK so after using that calculator I have decided that you are a genius by pointing me to that website. I am including a screenshot of the results. The only question I have now is with those results does that mean I need to add additional VG/PG. I know this is probably a stupid question but the only reason why I ask is because the VG/PG included in the nicotine . Anyways thanks for your help regardless.

After figuring some formulas out, I discovered that some PG/VG ratios are impossible to achieve depending on the PG/VG ratio of your nic juice; it tells you so on the calculator results and gives you the minimums and maximums you can achieve derived from your 'base' nic levels. But you may come close.

PS - thanks for the compliment.
 

rc3po

Super Member
ECF Veteran
Jun 22, 2014
497
218
Texas

rc3po

Super Member
ECF Veteran
Jun 22, 2014
497
218
Texas
OK so after using that calculator I have decided that you are a genius by pointing me to that website. I am including a screenshot of the results. The only question I have now is with those results does that mean I need to add additional VG/PG. I know this is probably a stupid question but the only reason why I ask is because the VG/PG included in the nicotine . Anyways thanks for your help regardless.

View attachment 367337

The pic is too small - I can't read it.
 
Status
Not open for further replies.

Users who are viewing this thread