hello,target pro

Status
Not open for further replies.

botox

Full Member
Oct 31, 2018
66
50
sweden
If you run in wattage mode you don't have to worry about temp settings. I believe the Ccell coils are rated up to 40W, if that's the coil you're still using.

well i do the reason is if i run it at more then w16 it burns the coil itself is fine since it works great in my back up mod another reason i do run it in temp mode it produces about 4 times as mutch vapor even at a lower setting
 

VapourFlavour

Moved On
Oct 16, 2018
1,226
3,532
Ontario, Canada
well i do the reason is if i run it at more then w16 it burns the coil itself is fine since it works great in my back up mod another reason i do run it in temp mode it produces about 4 times as mutch vapor even at a lower setting
If you're concerned that you've inadvertently changed some settings, I'd do a factory reset. Instructions for that are in your manual and on the downloadable version on Vaporesso's website.
 

Baditude

ECF Guru
ECF Veteran
Apr 8, 2012
30,394
73,076
71
Ridgeway, Ohio
I don't know what wire is used with your coils, but the type of wire determines what mode (wattage or TC) you should be in.

Ni wire in Ni mode only.
Ti wire in Ti mode only.
SS in either TC mode if SS is supported, or watt mode.
Kanthal in watt mode only.

An easy guide for learning the basics of vape wires

Find a You Tube video which has a detailed explanation of the settings your regulated mod has. It is entirely possible that you inadvertantly changed the mode or settings.
 

Baditude

ECF Guru
ECF Veteran
Apr 8, 2012
30,394
73,076
71
Ridgeway, Ohio
How do you vape? MTL (mouth-to-lung) or DTL (direct-to-lung). Most tanks do one or the other best; very few allow you to do both.

Do you want to use factory premade drop in coils or do you make your own wick and coils (rebuildable)?

Do you have a wattage preferance for your mod?

What diameter tank will fit on your mod without any overhang? Tanks vary in diameter: 22mm, 23mm, 25mm or more. Small or large juice capacity? Top fill or is bottom fill acceptable?

Knowing the above will help narrow down the choices considerably.
 
Last edited:

botox

Full Member
Oct 31, 2018
66
50
sweden
How do you vape? MTL (mouth-to-lung) or DTL (direct-to-lung). Most tanks do one or the other best; very few allow you to do both.

Do you want to use factory premade drop in coils or do you make your own wick and coils (rebuildable)?

Do you have a wattage preferance for your mod?

What diameter tank will fit on your mod without any overhang? Tanks vary in diameter: 22mm, 23mm, 25mm or more. Small or large juice capacity? Top fill or is bottom fill acceptable?

Knowing the above will help narrow down the choices considerably.
How do you vape? MTL (mouth-to-lung) or DTL (direct-to-lung). Most tanks do one or the other best; very few allow you to do both.

Do you want to use factory premade drop in coils or do you make your own wick and coils (rebuildable)?

Do you have a wattage preferance for your mod?

What diameter tank will fit on your mod without any overhang? Tanks vary in diameter: 22mm, 23mm, 25mm or more. Small or large juice capacity? Top fill or is bottom fill acceptable?

Knowing the above will help narrow down the choices considerably.
i usually vape dl,i want factory coils,as far as wattage i usually run what ever setting pruduces the most vapor so from 20-40 w,the tank i have now is 22 mm diameter even if i hade it sticking out i wouldent be botherd by it and as far as capacity goes bigger is better also top or bottomfill i dont have a prefrence
 

Letitia

Citrus Junkie
Supporting Member
ECF Veteran
Apr 2, 2017
25,818
136,603
West Frankfort, IL
i usually vape dl,i want factory coils,as far as wattage i usually run what ever setting pruduces the most vapor so from 20-40 w,the tank i have now is 22 mm diameter even if i hade it sticking out i wouldent be botherd by it and as far as capacity goes bigger is better also top or bottomfill i dont have a prefrence
So are you using the target pro 75w mod?
 

chellie

Ultra Member
ECF Veteran
Oct 24, 2014
1,264
3,200
USA
So are you using the target pro 75w mod?
I was going to ask the same thing. I have one that I purchased on sale - never opened.

so i finally got fed up with my vapresso target pro tank that came with the mod
as the coils havent been any good despite me doing everything sugested

soo what tanks are better for this mod i dont have a prefrence in coils only thing i want is for it to be easy to get
How do you like the mod?
 

botox

Full Member
Oct 31, 2018
66
50
sweden
So are you using the target pro 75w mod?
I was going to ask the same thing. I have one that I purchased on sale - never opened.


How do you like the mod?
yes its the 5-75 w the mod is comfortble but tank and coils are not good in my opinion waay too sensitive coils seem to frequently be bad also the tank leaks alot which is a common issue with it aswell as the coil
 

Letitia

Citrus Junkie
Supporting Member
ECF Veteran
Apr 2, 2017
25,818
136,603
West Frankfort, IL
also tanks and coils needs to be obtainable in sweden i will link my usual place when i get home where i buy things stuff usually arrives in 2 days for me hopefully the site wont be region locked
Pretty sure the China sites will ship to Sweden. Might look into those. So you need to find coils that would work well within your wattage limitations and leaves you with acceptable battery life. The new innokin isub b would be a good fit. Also uses the line of isub coils.
The Vaporesso NRG or baby Cascade would also serve you well with a good variety of available coils.
If you want more control the kanger Subtank or Toptank with the rba head is a good option as well. Personally since they switched to vertical coils I would only recommend using with the rba.
 

Eskie

ECF Guru
ECF Veteran
Verified Member
May 6, 2016
16,087
77,744
NY
I would second @Letitia recommendations. While mesh subohm coils provide excellent performance and decent longevity, most will use 50W of not more (not a lot more but it depends on personal preference). While your mod does provide up to 75W, you'll run into the problem of battery life. I may be wrong but I believe your mod has an internal battery, so when it's dead you have to wait for it to recharge rather than just swap in a fresh set. I'd be looking at coils that can perform well at around 30W just for the runtime, and Leticia's recommendations fit that better.
 

botox

Full Member
Oct 31, 2018
66
50
sweden
I would second @Letitia recommendations. While mesh subohm coils provide excellent performance and decent longevity, most will use 50W of not more (not a lot more but it depends on personal preference). While your mod does provide up to 75W, you'll run into the problem of battery life. I may be wrong but I believe your mod has an internal battery, so when it's dead you have to wait for it to recharge rather than just swap in a fresh set. I'd be looking at coils that can perform well at around 30W just for the runtime, and Leticia's recommendations fit that better.
The iSub B has the plexus mesh rated for 30-50w. From what I've read or watched 45w or so seems a sweet spot. The other isub coils can be run cooler and have a fan base as well.
another thing is that this mod is practicly my first so as far as wattage i tend to run it on has been limited due to the risk of burning the coil but i dont like the vape to be too too hot from what i can deduce from your replys and the websites items that i can find it seems to lean to vapresso nrg tank with gt8 coils but will these be weaker in vapor prudutiong than my ccell target pro tank setup? lets just hope these feckers are better thanx everybody:)
 
Last edited:
Status
Not open for further replies.

Users who are viewing this thread