Help a newbie
- Thread starter Mr.poche504
- Start date
- th_trl_thread_readers 0
- Status
Well, with a protected Li-Ion battery, your options are very limited. Like 1.7Ω and higher. That means a dual coil build would have to be 2 coils with individual resistance of 3.4Ω.
what if I went with a MNKE 18650 High-drain battery They are inexpensive so if I could get more options and better results I'll pick a couple up tomarrow
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
With an MNKE IMR 18650 1500mah, you would be able to go down to a 0.3Ω coil. To reach that with a dual coil, the individual coils would have to be 0.6Ω each. That battery would give you just about all the wiggle room you could ask for. At a 20amp CDR, there are very few batteries that surpass it.
20A is a good amount. I might pick some of those up 
I don't really know what "safe" sub ohm you could hit with 20 amperes, I'm not a sub ohm kind of guy. I do highly recommend micro coils though. You can see a post I made on them here with a picture for a guide line (3/32" diameter, that's a typo). If you need any help whatsoever just ask I'm happy to help you get your dripper going good!
Micro coils are: 1.) Safer than sub ohm, 2.) Produce hella clouds and very good flavor. You needn't worry about having the best batteries, some decent high drain IMRs and you're good to go. I usually wrap mine so they come out to exactly 1.3Ω so I can run them on my APV. Working very very good. You can even build dual micros on your Trident clone.
Don't forget to check out Rebuildable Subforum
Vape well, vape often
I don't really know what "safe" sub ohm you could hit with 20 amperes, I'm not a sub ohm kind of guy. I do highly recommend micro coils though. You can see a post I made on them here with a picture for a guide line (3/32" diameter, that's a typo). If you need any help whatsoever just ask I'm happy to help you get your dripper going good!
Micro coils are: 1.) Safer than sub ohm, 2.) Produce hella clouds and very good flavor. You needn't worry about having the best batteries, some decent high drain IMRs and you're good to go. I usually wrap mine so they come out to exactly 1.3Ω so I can run them on my APV. Working very very good. You can even build dual micros on your Trident clone.
Don't forget to check out Rebuildable Subforum
Vape well, vape often
Last edited:
- Status
Similar threads
