HELP!! Cinnabomb killed my atomizer. How can I smoke Cinnabomb?

[steven445]

I ordered the glass tank with cartomizers!
I will let everyone know how it goes!
How long does it take to ship from California to Ohio First Class?
I didn't realize I double posted, sorry!
I bought these cartomizers....https://www.ibtanked.com/accessories/smok-1-5-ohm-dual-coil-1-hole-xl-detail
I ordered the 25mm XL because their punch tool was sold out.
Anyone who hasn't tried Cinnabomb might not want to try it lol because once you do its the only flavor you will want to vape.

 

[Amish Ed]

You ordered end caps and a drip tip too right?

 

[steven445]

You ordered end caps and a drip tip too right?

I ordered the stainless steel caps and Drip tip as well.

 

[Baditude]

I ordered the stainless steel caps and Drip tip as well.

It generally takes about 3 days from Cali to OH. You ordered the 25mm XL tank? That is IBTanks largest tank; it holds a whopping 8ml of liquid. Plenty big for a skinny eGo battery. Maybe too big.

You did good matching the lengths correctly. XL tank = XL cartos. If you find the 1.5ohm Smoktech to be too harsh or makes your juices taste burnt or that the dual coils drain your batteries too quickly, you should try a higher ohm carto next time (2.0 ohm) and try a single coil cartomizer.

Dual coils cartomizers obviously have two heating elements so they will drain a battery more quickly than a single coil cartomizer. The 1.5 ohm cartomizer uses low resistance heating coils, which means a hotter vape. For those people prefering a cooler vape experience, a 2.0 ohm or even 2.5 ohm cartomizer will work better.

Rewatch the video I posted earlier in this thread to review all the steps in filling the cartomizer prior to inserting it into the tank. Use a toothpic in the air hole to keep out unwanted liquid there. Also assemble the two endcaps onto the glass tube before inserting the filled cartomizer half way when filling the tank with juice. It will all come together nicely.

 

[steven445]

It generally takes about 3 days from Cali to OH. You ordered the 25mm XL tank? That is IBTanks largest tank; it holds a whopping 8ml of liquid. Plenty big for a skinny eGo battery. Maybe too big.

You did good matching the lengths correctly. XL tank = XL cartos. If you find the 1.5ohm Smoktech to be too harsh or makes your juices taste burnt or that the dual coils drain your batteries too quickly, you should try a higher ohm carto next time (2.0 ohm) and try a single coil cartomizer.

Dual coils cartomizers obviously have two heating elements so they will drain a battery more quickly than a single coil cartomizer. The 1.5 ohm cartomizer uses low resistance heating coils, which means a hotter vape. For those people prefering a cooler vape experience, a 2.0 ohm or even 2.5 ohm cartomizer will work better.

Rewatch the video I posted earlier in this thread to review all the steps in filling the cartomizer prior to inserting it into the tank. Use a toothpic in the air hole to keep out unwanted liquid there. Also assemble the two endcaps onto the glass tube before inserting the filled cartomizer half way when filling the tank with juice. It will all come together nicely.

A harsh hit is what I want lol.
Could someone confirm that Cinnabomb won't kill these cartomizers also?
I should get about a week of use on each cartomizer correct?

 

[The Ocelot]

I am a cinnamon freak! The carotimizers used in the tanks are a different critter than the kind you linked to a few posts back. Cinnamon melts polycarbonate and acrylic, it does not melt polypropylene, glass or metal. The cartos that go in the tanks are metal. The ones you linked to are not designed to go inside of a tank and have "plastic" (likely polycarbonate) components.

Cinnamon:

Bad gear:


Good gear:

 

[steven445]

I am a cinnamon freak! The carotimizers used in the tanks are a different critter than the kind you linked to a few posts back. Cinnamon melts polycarbonate and acrylic, it does not melt polypropylene, glass or metal. The cartos that go in the tanks are metal. The ones you linked to are not designed to go inside of a tank and have "plastic" (likely polycarbonate) components.

Cinnamon:

Bad gear:
View attachment 154196 View attachment 154197

Good gear:
View attachment 154198

https://www.ibtanked.com/accessories/smok-1-5-ohm-dual-coil-1-hole-xl-detail
So these are ok right?
I am a Cinnabomb freak lol!

 

[The Ocelot]

https://www.ibtanked.com/accessories/smok-1-5-ohm-dual-coil-1-hole-xl-detail
So these are ok right?
I am a Cinnabomb freak lol!

I wish I could see the pictures. If IBTanked says the cartos will work in their tanks, I'm sure they will. I have a 19mm XL IBTanked with stainless steel caps, and I use this carto: Single Coil XL Tank Cartomizer for the SmokTank XL 2.0 ohm. That's what is in my picture, with a Stainless Steel drip tip too! Cinnamon melts drip tips unless they are metal, glass or ceramic.

 

[steven445]

I wish I could see the pictures. If IBTanked says the cartos will work in their tanks, I'm sure they will. I have a 19mm XL IBTanked with stainless steel caps, and I use this carto: Single Coil XL Tank Cartomizer for the SmokTank XL 2.0 ohm.

You don't think I will need anymore cartomizers now then?
I bought 6 of those and 4 of these.
https://www.ibtanked.com/accessories/ce2-style-1-5-ohm-dual-coil-2-hole-xl-detail


These said they have a wick in them so i figured I would try them both.

 

[The Ocelot]

You don't think I will need anymore cartomizers now then?
I bought 6 of those and 4 of these.
https://www.ibtanked.com/accessories/ce2-style-1-5-ohm-dual-coil-2-hole-xl-detail


These said they have a wick in them so i figured I would try them both.

You probably have enough to start with. I've never tried a dual coil or the CE2 style, so I can't precisely help you there. The single coil 2.0 ohms last me about a month

 

[graybuck]

If you talked to the owner at IBTanked he will set you up right. I got exactly what I needed after talking with him and they work great with no leaks. I have not tried that new style carto yet. I may give them a try next order.

 

[steven445]

Does 2.0 have good throat hit though?
I like the feeling of LR.

 

[The Ocelot]

I ordered the stainless steel caps and Drip tip as well.

I think I misread this post. With Cinnabomb you're going to need a stainless steel drip tip too.

 

[steven445]

Ok how long does shipping take from smoktek??
I want LR so 1.5 ohm 2 holes would be the best??

 

[The Ocelot]

Does 2.0 have good throat hit though?
I like the feeling of LR.

2.0 is still in the low-res category. Have you tried Cinnamon Fireball from ECBlend? They have a "Make it Nuclear" flavor boost option.

 

[steven445]

2.0 is still in the low-res category. Have you tried Cinnamon Fireball from ECBlend? They have a "Make it Nuclear" flavor boost option.

I think 1.5 ohm would be my best bet but is 1 or 2 holes better to have for Cinnabomb?

 

[graybuck]

The 1.5 works nice at low 3.3-3.8 volt settings. One hole or two depends on the thikness of the juice. If you use more VG then it is thicker and you want more holes. I always use the two hole and they work well with my juice. I don't know anything about Cinnabomb or where it even comes from, but generally the Cinn flavors require the better glass tank that you got from IBTanked.

 

[The Ocelot]

...but generally the Cinn flavors require the better glass tank that you got from IBTanked.

What do you mean?

ETA: Sorry, I read that weird. I thought it said he needed a better tank than what he got from IBTanked. Never mind...move along...ignore the old lady...

 

[steven445]

I use 80 pg 20 vg so that means I need probably one hole?

 

[The Ocelot]

I use 80 pg 20 vg so that means I need probably one hole?

That's personally preference. One or two will be fine.