HELP! Ego-C twist broken?! :(

Status
Not open for further replies.
my vision spinner just failed also..the blinking light thing..lucky it's still under warranty, but need to ship it back etc etc..not impressed with it so far..

I JUST (literally JUST) put in my request for replacement. The website says within 30 days so i clicked it and called and left them a message hopefully when they talk to me monday (the 26th 2 days after the 30 day warranty) they won't try any funny business and try to say it's past the 30 day mark, because i have email and phone proof i notified them before hand (myfreedom smokes . com) i had 2 batches (10 total) clearomizers that leaked profusely from them also, then the battery bummed out yesterday i plan to NEVER order from their again once this ordeal is over. jezzzz... talk about a freakin' headache!

I will let ppl know if i have issues with trying to get a replacement when i get a call back from them or i call them back monday.
 

X P3 Flight Engineer

Ultra Member
ECF Veteran
Verified Member
Feb 27, 2012
2,598
1,305
Moncton, N.B. Canada
My ego-c twist won't work. Light blinks randomly, but won't cut on a clearomizer and won't charge on the charger.

Try pulling the center post of the battery up slightly. Rock it side to side with a straightened paper clip or tiny screwdriver. Then try it on the charger. The post often gets pushed down by a carto.

Check to see if any cartos have a center post that sticks out past the threads. If they do push the center post up until it is flush with the bottom.
Good Luck!
 

Thrasher

ECF Guru
ECF Veteran
Verified Member
Oct 28, 2012
11,176
13,742
Madeira beach, Fla
Try pulling the center post of the battery up slightly. Rock it side to side with a straightened paper clip or tiny screwdriver. Then try it on the charger. The post often gets pushed down by a carto.

Check to see if any cartos have a center post that sticks out past the threads. If they do push the center post up until it is flush with the bottom.
Good Luck!

agreed it sounds like the post just got pushed down
 

struckus

Super Member
ECF Veteran
Verified Member
Oct 24, 2012
453
153
Ontario, Canada
mines really loose in there..I know about the trick and I got it to work with my vivi but it's really sensitive to where I leave the pin inside..I have to set it just right for it to work..i'll warranty it because this is not proper function..I do have it working though but if I attach my kanger T3 then it will blink at me again and I have to fool with the centre post for a bit to get it to work again..
 
Status
Not open for further replies.

Users who are viewing this thread