Help me emergency!!

[SavageWayz]

MY kayffun lite v2 is stuck onto the top cap of my nemesis. i have tried gloves, pliers everything. is the holes suppose to line up. tell me anything , help me
i havent vaped in 3 hrs and i feel faint.

 

[Sloth Tonight]

oh man wish I could help...I have one of these on order but never used one before. Best of luck, hang in there...someone will come to your rescue momentarily I am sure!

 

[Marc411]

Is it the one that has the bottom screw air adjustment?

If so try to lift as you unscrew the kayfun off the mod. That screw has been a problem for some that like an airy hit and have the screw out further then the base of the rba.

 

[Killowatt]

Place in freezer for a while, drastic change in temp shrinks and expands metal. Heat expands it, cold shrinks it.

Tap'n on my S5

 

[SavageWayz]

Is it the one that has the bottom screw air adjustment?

If so try to lift as you unscrew the kayfun off the mod. That screw has been a problem for some that like an airy hit and have the screw out further then the base of the RBA.

i dont have the screw in at all

 

[DoubleEwe]

I was having similar troubles with both my Kayfun & Magma on my Tree of Life Mod...

For me what solved it was unscrewing the adjustable screw that goes through the mod topcap. The Atomizers were then easy to unscrew.

I don't know if the nemesis has a similar adjustable screw thing, but if it does then it certainly deserves a try...

 

[SleeZy]

I was having similar troubles with both my Kayfun & Magma on my Tree of Life Mod...

For me what solved it was unscrewing the adjustable screw that goes through the mod topcap. The Atomizers were then easy to unscrew.

I don't know if the nemesis has a similar adjustable screw thing, but if it does then it certainly deserves a try...

This!
Unscrew the bottom pin and then try to unscrew the atty.
Another good idea might be to put it in the freezer as Killowatt said.

I've had the same issue, but it was quite easy to unscrew when i removed the adjustable pin screw.

 

[DoubleEwe]

I don't think the freezer idea would work because both parts are metal and therefore both will contract to the same extent.

For it to work better you could put a bag of frozen peas (for example) around the atomizer (leaving it for a little while) and then pour hot water over the Mod Topcap.

 

[gopher_byrd]

Two sets of pliers, one to hold the KFL base the other for the Neme top cap. Leverage is what is needed. I wrap my plier jaws with thick electrical tape so I won't scratch my devices.

 

[SleeZy]

Two sets of pliers, one to hold the KFL base the other for the Neme top cap. Leverage is what is needed. I wrap my plier jaws with thick electrical tape so I won't scratch my devices.

That could break the 510 pin on the kayfun though, so use this method with caution.

However thanks for a great advice with the electrical tape!
I've to do this aswell, due I've another issue with one of my kayfuns. The bottom tubing part (pmma part, it'll scratch/break easily with my pliers) is stuck on my kayfun base. Somehow juice got in the threadings and i think that's why i can't remove it. Quite annoying due i want to clean it.
As you can see on this picture:

Oh well i hope you'll manage it, TS!

 

[SavageWayz]

Fineally got it off but not my Kayfun has "the Gurgle"

 

[SleeZy]

Fineally got it off but not my Kayfun has "the Gurgle"

To little wicking / not sealed tight everywhere?

 

[SavageWayz]

i got it fixed. im guessing it had to have time to soak more into the cotten. but going good now

 

[Sloth Tonight]

i got it fixed. im guessing it had to have time to soak more into the cotten. but going good now

funny, I have that trouble sometimes too. I've learned that at least with my current wicking skills, the first few hits will a) taste cottony which I hate so I don't inhale for 5-10 puffs, and b) may gurgle some. After that, they start to crackle and all is good! My most recent wick doesn't pop or crackle...but it vapes like a champ. x.x

 

[distortoblotto]

I rarely get the gurgles with my Kayfuns but, when I do, a quick blow through the mouth piece with a paper towel held up to the intake port until dry usually cures it right up.

 

[mistike]

I rarely get the gurgles with my Kayfuns but, when I do, a quick blow through the mouth piece with a paper towel held up to the intake port until dry usually cures it right up.

I blow through the air hole to get rid of them

 

[distortoblotto]

I blow through the air hole to get rid of them

LOL Girls!