Help! Need some new suggestions.

[AngeNZ]

I have been vaping since December 28th, 2009. The problem is that when I find something I like and that works for me, I tend not to keep up to date with the new fangled contraptions. For example, I vaped with a joyetech evod battery for over 6 years, until I found a battery that could be plugged in the bottom while I used it. I used that battery up until about 2 years ago when I decided to branch out and I tried the joyetech Cubis Max. Yes, it had it faults, and I constantly had to carry tissues with me because it leaked around the top. However, I was fine with this because I really enjoyed the flavor, and the kanthal wires were cheap (roughly $1 for 4 days use). But now I cannot find those parts anywhere.

Basically what I am needing: I like to vape around 18.5 wattage. I also need the upkeep to be inexpensive. I am on a very fixed income (783/mo). I would prefer the system to be easy to use. I did try to the cubis pro system and could not figure out how to cut the cotton and fit it around the atomizer, if this indicates my level of technical knowhow.

anyway, thank you for advance,
Autumn

I second the Hellvape MD MTL RTA - easy to build and wick, various airflow options from tight MTL through to RDL, 4ml capacity, and awesome flavour

You can get all you need to get started at MyVpro:

Use the coupon code NEW5 for 5% discount
Hellvape MD 24mm MTL RTA

Wick n Vape Cotton Bacon Prime

Coil Master - A1 Wire Spool - 15ft
Grab either 28g or 26g

 

[vaper1960]

i've suffered long with the Elevate RTA when i started rebuildables, but the Hellvape MD and Gear took only a couple of times to figure out.

If you don't mind me asking... what are the issues you had with that (was just going to order) I'm also interested in the Gear.

 

[virm]

If you don't mind me asking... what are the issues you had with that (was just going to order) I'm also interested in the Gear.

there was amount of cotton. someitmes would be spitbacks, others, dryhits, often, both at the same time. but like it isn't simply a matter of wetting cotton, but there's air pressure and whatever as well. still rarely does it wick to my satitsfaction. at its best it was a thick and wet enough vape and i could go to 48watts wthout fealing i've burnt somthn. Gear, on the other hand, is fine, easy, as in there's a clear thing to learn and youre good, no leaking no drying the wick etc. it's also more celebrated flavourwise.

i loved the elevate for AF and must have tried to get it going again over a 100 times. gear did become my normal everyday vape, wicked in one go and i could pocket it without leaking. only down is tiny tank and juice consumption... je squonke, now

 

[virm]

I second the Hellvape MD MTL RTA - easy to build and wick, various airflow options from tight MTL through to RDL, 4ml capacity, and awesome flavour

You can get all you need to get started at MyVpro:

Use the coupon code NEW5 for 5% discount
Hellvape MD 24mm MTL RTA

Wick n Vape Cotton Bacon Prime

Coil Master - A1 Wire Spool - 15ft
Grab either 28g or 26g

Vandy Vape - Superfine MTL Fused Clapton WireKA1 32ga x 2 (=) +38ga 10ft
Vandy Vape - Superfine MTL Clapton Wire

one o these might be better.
there seems to be a signup coupon worht 10%.. try that too

 

[virm]

Really if the op likes what he is using and is able to stock up as inexpensive as they are able to from ft, why change?

Should see a large pink buy button on the top right viewing from mobile.

they did mention something new though.

what buy butoon/// you bought them maybe then, coz its' "get an alert ..."

 

[Mordacai]

@Daniel Forsyth, what about the Ulton clone of the Taifun GX?

It's an RDTA with airflow inserts that you can change, unfortunately there's no package with all the inserts included. They have to be bought separately.

Here's a link though with the options available.

2Fdeal - Premium Vape Store for Worldwide

 

[ShowMeTwice]

Don't make fun of my coil

I would never.

Only one question mate...
Was it a late night coil done before, during or after ???

 

[Daniel Forsyth]

@Daniel Forsyth, what about the Ulton clone of the Taifun GX?

It's an RDTA with airflow inserts that you can change, unfortunately there's no package with all the inserts included. They have to be bought separately.

Here's a link though with the options available.

2Fdeal - Premium Vape Store for Worldwide

I'm not familiar with that one Mate so I can't comment

 

[Mordacai]

No worries @Daniel Forsyth, it's only just hitting the market now.

But the changeable airflow inserts look interesting.

 

[virm]

here a list of sites for coupons and online sellers that should come in real handy_ courtesy of an overly polished lady (major case of shinyitis)

always worth trying codes, I also use Vape Coupons - Cheap Vaping Deals and Vape Discount Codes and Coupons | eCig Directory UK for UK sites

 

[ChloeEranu]

I would like to thank everyone for their suggestions, but I would like to give a special shout out to JCinFLA for spending literal hours on the phone and talking me through everything from DIY to rebuilding coils. I appreciate you so much!