Help please im new

[jason25366]

I just bought a spinner vision 1300 mah first battery ever and i got the smok tech screw tank but its at 1.5ohms im not sure if this is bad or not and if it is will my battery die and or is this low resistance usable without dmg and what voltage should i use thanks

 

[Judge Dredd]

Start out at 3.7 volts and increase in small increments until you get a taste you like!

Welcome to ECF!

 

[time2quit]

I just bought a spinner vision 1300 mah first battery ever and i got the smok tech screw tank but its at 1.5ohms im not sure if this is bad or not and if it is will my battery die and or is this low resistance usable without dmg and what voltage should i use thanks

it's absolutely usable! How many including myself prefer the low resistance heads. Just make sure you don't go higher than 3.4v you should find a nice they between 2.6-3.4 volts

 

[Vapoor eyes er]

I just bought a spinner vision 1300 mah first battery ever and i got the smok tech screw tank but its at 1.5ohms im not sure if this is bad or not and if it is will my battery die and or is this low resistance usable without dmg and what voltage should i use thanks

Hi Jason and welcome to ECF. I use 1.8 ohms all the time @ 3.7- 4.0 volts on my Spinner BUT I enjoy a warm vape. As Judge Dredd suggested turn the voltage low and work your way up until you hit your sweet spot- some juices better at lower voltage while others better at higher voltage.

Edit: Here's a voltage/ ohms chart:
http://25.media.tumblr.com/tumblr_m9dkanCt0I1qc8949o2_1280.png

 

[Vapoor eyes er]

Because the Spinner fires from 3.3 - 4.8 volts prolly the best "all round" ohms for the Spinner is 2.4 ohms. Higher ohms will give a cooler vape BUT too high and the vape becomes weak.
1.5, 1.8 ohms, 2.0 ohms- 3.3- 4.0 volts
2.4 ohms- 4- 4.8 volts

 

[babyk1352012]

Your battery will be just fine lol. Like someone else said start at 3.7 and works your way up to a comfortable spot

 

[darkhood]

Double the ohms to get the voltage and you can add 0.3 on either side to get the range. 1.5ohms I'd use @ 3.3 personally.