Help please

[sambagnall]

I bought a wismec tfv8 tank from amazon
When I turn it on its side/upside down for 1 second I get some liquid dripping through the air flow holes (bottom of tank)

No silly replys (dont turn upside down) please

I just need suggestions on how to stop this since when in my pocket it will move etc.

Thanks

 

[puffon]

Don't do cart wheels, when you have a mod in the pocket....

 

[Ben85]

Don't do cart wheels, when you have a mod in the pocket....

 

[Joergl100]

I think, it's a SMOK TFV8, not WISMEC?

Maybe, there is a poor/defective coil head inside?

 

[sambagnall]

I think, it's a SMOK TFV8, not WISMEC?

Maybe, there is a poor/defective coil head inside?

Yeah I figured, i saw lots of youtube videos about wires in the coil but i dont think that is the problem..
I know its something simple but im not 100% sure what, just want to sort it out before i waste liquid/get sticky haha

 

[sawlight]

Sounds like it's flooding. Does it gurgle or spit back when you vape it? You might need to up the wattage some to prevent this.
Or you might have a bad coil.

 

[sambagnall]

Sounds like it's flooding. Does it gurgle or spit back when you vape it? You might need to up the wattage some to prevent this.
Or you might have a bad coil.

I have it on 100 watt should be alright around 100?
Also it doesnt spit or make a gurgle noise when vaping just comes out the air hole annoying.. i want everything perfect. Also im not a big vaper so i dont know much about them

 

[Ben85]

What coil head do you have in it?

 

[sambagnall]

What coil head do you have in it?

Its the first/only ever one that has been in since i got it ordered.
Think its a v8 rba for the tfv8 coil (6.6t)

 

[puffon]

.

 

[HaileStorm]

I bought a wismec tfv8 tank from amazon
When I turn it on its side/upside down for 1 second I get some liquid dripping through the air flow holes (bottom of tank)

No silly replys (dont turn upside down) please

I just need suggestions on how to stop this since when in my pocket it will move etc.

Thanks

Hey samba!

Forgive me if you already know this but first things first:

1. Before you fill, make sure the air flow holes are shut.

2. Make sure the coil itself has a complete set of o-rings and that it's tightened down.

3. When filling, don't leave the fill port open for too long.

4. If all else fails, try a higher vg juice.

Hope this helps!

 

[Super Flex]

If you are using the RBA then you have wicked it wrong, maybe to short or not setting right in the juice holes.