OK here's the deal, we live in great times where technology advances so rapidly. Just a year ago I was introduced the my beloved Kanger T3S. This was a godsend over the CE4's, what a delicious vape compared! At the time I used to purchase new coils and realized I much preferred the 1.5 ohms comared to the 2's (or even 1.8's). I was a newbie.
Then I got into rebuilding and have now progressed to rebuilding RBA's. My faves being the AGA-T7 and the Fogger 4.1 (4.4?).
Here's the deal… back then I presumed (remember I was a noob) that the thinner the wire was producing the better vapes off of regular eGo batteries and such. I somehow got 1.5ohms mixed up with .15 kanthal and ordered a 25m roll of it. At the time one would have presumed (assumed?) they would be rebuilding the itty bitty Kanger coils for the rest of their days.
Having matured over the years (months morelike) I am now devoted to the RBA bad boys and know they require an absolute minimum of 30 guage so I now use 28 gauge exclusively.
My cry for help for you guys is as follows: What use is my 25 metres of 34 gauge good for?
This evening I have sat down and have been racking my brains trying build a coil using this hair thin wire. Every time I am either getting 3+ ohms or with less wraps and immediate burning taste (I guess the 2 wraps on that one was always going to be ewww).
Tl; dr - what is the best coil set up using .15 kanthal to use on regular eGo batteries on a T3S?
Sent from my GT-N7100 using Tapatalk
Then I got into rebuilding and have now progressed to rebuilding RBA's. My faves being the AGA-T7 and the Fogger 4.1 (4.4?).
Here's the deal… back then I presumed (remember I was a noob) that the thinner the wire was producing the better vapes off of regular eGo batteries and such. I somehow got 1.5ohms mixed up with .15 kanthal and ordered a 25m roll of it. At the time one would have presumed (assumed?) they would be rebuilding the itty bitty Kanger coils for the rest of their days.
Having matured over the years (months morelike) I am now devoted to the RBA bad boys and know they require an absolute minimum of 30 guage so I now use 28 gauge exclusively.
My cry for help for you guys is as follows: What use is my 25 metres of 34 gauge good for?
This evening I have sat down and have been racking my brains trying build a coil using this hair thin wire. Every time I am either getting 3+ ohms or with less wraps and immediate burning taste (I guess the 2 wraps on that one was always going to be ewww).
Tl; dr - what is the best coil set up using .15 kanthal to use on regular eGo batteries on a T3S?
Sent from my GT-N7100 using Tapatalk
I nicknamed it MANTHAL. Lol. Lemme know if you like it! I have been using it for 7 months now haha. I've twisted everything you can think of. 
