Help with Cool Fire 4

[SpectreNexus]

Hey everyone,

I have been running my cool fire 4 with an Innokin I sub tank for a while with no problems. I have always used 80 + vg without issues but recently I have been getting a lot of juice passing through the drip tip. I have switch up juices, cleaned it out, new atty's and nothing seems to be helping. I swapped out the tank with my spare and same issue. I am apparently doing something wrong. It doesn't seem to matter how weak or hard I draw, it is the same thing.
- Cool Fire 4
- Innokin iSub
- new and rebuilt Atty's
- 0.47ohm seems to be the avg
- 4.5 V
- 25 watt

Any ideas on what it could be or what I am doing wrong?

 

[Caterpiller]

As the Innokin iSub takes manufactured coils, I'd suggest your issue is most likely to be flooding caused by a poor seal somewhere in the tank.

Try taking it apart and check any o-rings, then putting it back together ensuring all seals are nice and snug.

 

[CluelessNoob797]

I'm also getting drip from the air flow chamber and it seems to be slowly flooding my coil. I'm going to get the intended coils for this sub now that I know they make them try keeping your e cig juice full, tis what I've read in other forums. I'm also going to take the thing to the place I bought today and make sure the rings are placed accurately. They look totally fine to me, but I'm getting this annoying drippage whenever I leave the thing unattended for more than two hours, come back and I have to towel dry my coil and wipe down the coil holder and the other bottom of the sub. I also had leakage coming out from the top, but that doesn't happen all the time .

Someone had mentioned maybe I'm pulling it to hard? It's not like I'm breathing in with all of my force like my friend does to his tank, but I do take a nice long drag and sometimes I take it in succession. Trying to quit smoking.

If you find any answers please share, I'm at my wits end :0

 

[whodat2112]

Make sure the coil is seated correctly. There are "notches" that must align when inserting the coil into the base.
My Isubs ( I have several ) never leak.

 

[CluelessNoob797]

Actually I do have a coil from them, and for some reason it still leaking. :0 I have it situated properly. It fits in good.