Here's what i got

[BlazingAlaskan]

I have a copper Limitless mod with a Twisted messes rda currently equipped with dual 24ga titanium zippers. I also have a Snow Wolf 200w and a smok TFV4. The batteries I'm using are Imren 2500 mah 40 a. I'm looming for suggestions on a good coil build(s) so i can use my messes on my wolf

 

[Izan]

Hi mate,
Imren Purple 40A 2500mAh 18650 Bench Test Results...only a 20A battery, runs very hot

What are your goals?
What flavours do you use?
Why can't you use the current build on the SW.
What wire do you have and what types of coils can you make?

Cheers
I

 

[BlazingAlaskan]

my goal is to use my TM on my SW, my flavor is pretty constant with game over by flawless, boss reserve by cuttwood and ludicrous speed by Schwartz. as for using my current build ol wolfie reads it a .02 but will only fire @ .05 or better as for building i can make zippers, parallels, claptons. the wire i have on hand to play with is 20g, 24g, 32g nichrome 80 24g titanium and 26g nickle

 

[Izan]

I would try a higher Ω zipper. You might not be able to swing it with the Ti you have, but maybe with a larger ID and a couple extra inches of wire you could get close.

Remember you have HUGE head room with the SW, .05Ω to .07Ω should be your new target resistance.

Have fun
I

 

[suprtrkr]

Hi and welcome. @Izan is right. Shoot for .05ish with the zippers. And buy some authentic Sony VTC4s for that Wolf. Get two pairs and marry them, always using and charging the pairs together.