hi guys.. newbie here.. help

Status
Not open for further replies.

JimZet

Super Member
ECF Veteran
Verified Member
Dec 31, 2015
319
358
35
of course its not advisable, these kind of builds are usually made for short period of time for cloud chasing a little and such but not for all-time vape. Plus really good battery needed for this kind of build, it becomes risky when it comes to 0.1 .
If you don't know what you are doing, don't bother with it and just make dual coil around 0.4-0.6. You don't want to put yourself in risk right?
 

Baditude

ECF Guru
ECF Veteran
Apr 8, 2012
30,394
73,077
72
Ridgeway, Ohio
i did qud coil on my vape.. .12 ohms running on rx200s.. is that okay??

battery is (3600mah 30amp 3.7v) x3

enook battery

like i said im newbie...

First of all, as a beginner I'm glad that you are coming here asking questions concerning safety. :thumb:

I've never heard of the brand "enook". Even though this appears to be a new battery on the market, I can guarantee that this battery is not a 35 amp battery with 3600mah capacity. More than likely this is a rewrap battery with extremely over-rated specifications. I wouldn't begin to try to guess what its true specifications are.

batteries-enook-18650-imr-3-7v-battery-flat-top-3600mah-35a-high-drain-1.JPG


Please read:

Battery Amp Ratings: Continuous vs Pulse Ratings
Battery pulse ratings are useless! | E-Cigarette Forum
There are no 18650 batteries with a genuine rating over 30A!
Are You Using a ReWrap Battery?

I don't know where you live and what batteries are available to you, but I recommend purchasing the recommended batteries below. None of the below 18650 batteries are rewraps. Many people use either the pink Samsung 30Q or brown LG HG2 batteries in their RX200.

image-jpeg.555235



Why build coils so low? You are aware that 0.0 ohm is a hard short, which can cause a battery to explode, right. The lower you build the closer you are to a hard short. 0.12 ohms is just o.12 ohms from a hard short, right? What if your ohm reader is off by 0.1 or 0.2 ohms?

You are using a regulated variable wattage mod. You don't have to build so low with a regulated mod; you can always turn up the wattage higher to fire your coils.
 
Last edited:

Amphieuss

Full Member
Jul 28, 2016
10
8
Netherlands
1st off : Get some "real" batteries Batteries from companies like : Sony VTC4, 5. LG (pink hb6 for example) and check out a guy named Mooch (previous post of this topic)

2nd : 0.1 is insane, especially when you have no clue what you are doing. I have a Smok cube II and I rock it with a Geekvape Griffin 6ml and a dual kanthal build with flat twisted coils. Its at a 0.22 ohm build. Big clouds and great flavor. currently I have 2 sets of batteries that I swop out ( so 4 batteries married in a couple) 1 set of Sony VTC 5 and a set of LG HB6. I don't have any problems and vaping at a max of 60W

3rd : Check out ohms law, battery safety (mooch guide) and figure out how volts , ampere and watt work.

Besides all that , WELCOME! Glad you ask for safety issues and batteries.
Always do the research before doing stuff. And with batteries don't save on money.

Sony and LG batteries might seem expensive, but really its well worth the money.
Better hold out on money for your mod , liquids, wire, cotton etc. Then try to save money on batteries.
 

Amphieuss

Full Member
Jul 28, 2016
10
8
Netherlands
Steam Engine main page

This is a fairly good site to calculate your Ohms and Amps ...

I did a calculation of a 0.1 coil on 80 W ... that pushes your battery to approx 28.28 AMPS ...

That is pushing your battery to maximum .. and since you are using a probable "rewrap" what is playing with your face so to say .... in other words ... not good.
 
Status
Not open for further replies.

Users who are viewing this thread