Hi peoples

Status
Not open for further replies.

crompers

Senior Member
ECF Veteran
Aug 5, 2015
112
98
40
This is the thing it needs to be the path of least resistance as I know myself and I have no willpower! I would pull the cheapo plastic thing out of my pocket, get the fluff out of the mouthpiece and if it didn't fire or tasted like fish or whatever I'd just end up buying cigarettes.

Time to kick it though, I'm not getting any younger or richer.
 

r77r7r

ECF Guru
ECF Veteran
  • Feb 15, 2011
    13,653
    22,632
    Pa,LandOfTaxes
    This is the thing it needs to be the path of least resistance as I know myself and I have no willpower! I would pull the cheapo plastic thing out of my pocket, get the fluff out of the mouthpiece and if it didn't fire or tasted like fish or whatever I'd just end up buying cigarettes.

    Time to kick it though, I'm not getting any younger or richer.

    If you're not into this as a hobby, carto tanks are cheap easy and reliable.
     

    suprtrkr

    ECF Guru
    ECF Veteran
    Verified Member
    Jun 22, 2014
    10,410
    15,049
    Cowtown, USA. Where the West begins.
    Could have been where i was going wrong with the clearos, tried to go to 16mg too quickly. Plus those cheapo plastic things are just a pain in the ....
    Lol, aye, so they are. You'll be happier with the Subox, I'm thinking. Good luck and welcome to the board.
     
    • Like
    Reactions: Denvap0r

    r77r7r

    ECF Guru
    ECF Veteran
  • Feb 15, 2011
    13,653
    22,632
    Pa,LandOfTaxes
    I never had good luck with those. Tried different types, but they would always flood on me and could never get a good airflow. Could have been me, just didn't like them.

    Sorry to hear that. Many of us have worked thru that stage by using techniques similar to fixing the leaks and airflow problems in other toppers.
    Maybe you understand more about such things and might be able to solve those issues now. Most people are overwhelmed with their first toppers and learn to figure it out better down the road.
     

    Denvap0r

    Ultra Member
    ECF Veteran
    Verified Member
    Feb 10, 2014
    1,152
    1,685
    Colorado
    Sorry to hear that. Many of us have worked thru that stage by using techniques similar to fixing the leaks and airflow problems in other toppers.
    Maybe you understand more about such things and might be able to solve those issues now. Most people are overwhelmed with their first toppers and learn to figure it out better down the road.

    You're absolutely correct on that. It was one of my first tanks and was frustrating. I believe I could probably make it work now that I have more of an understanding of the whole process.
     

    crompers

    Senior Member
    ECF Veteran
    Aug 5, 2015
    112
    98
    40
    Thanks guys.

    OK so I've just been into the vape shop to buy some juice, the guy said that with the .5 ohm head I'll need a very high VG juice or it'll just burn off too quick. I ended up buying a 50/50 20mg and a high vg 6mg juice (90+).

    I put the 50/50 in and he said i'll need to run it below 9w for this juice, I've tried that and the experience is......meh. put it up to 15 and I can hear crackling a little bit but it seems much better. Is he talking rubbish? Am I potentially damaging the device running it at 15?
     

    r77r7r

    ECF Guru
    ECF Veteran
  • Feb 15, 2011
    13,653
    22,632
    Pa,LandOfTaxes
    You're absolutely correct on that. It was one of my first tanks and was frustrating. I believe I could probably make it work now that I have more of an understanding of the whole process.

    And maybe I could try what you're using nowadays :) My needs are a 4.5ml tank mostly and inexpensive coils. GSAir?? Version M, S?
     
    • Like
    Reactions: Denvap0r
    Status
    Not open for further replies.

    Users who are viewing this thread