Next week, after my 5 year old grandson goes back to his parents, I'm going to the Home Depot or like and seek out some extra fill hole screws. I'm bound to lose one, at some point.
- Andy
- Andy
High-End Mechanicals Chat, Tips, and Pics
- Thread starter b0redagain
- Start date
- th_trl_thread_readers 0
- Status
Well, my spares bag had only fill hole screws...so I am off to find deck screws.
Sirius SS II
By vape Art, The Art of vaping | Προϊόντα Ατμίσματος Υψηλής Ποιότητος
Well, went ahead and ordered this today. Another Greek largesse. Had to buy something different, something aside the routine bottom firer, the side firer, or the regular thumb switch...
So, Vapor Wall came to the rescue again, the posters there had only good things to say about this mod, and I thought - why not? I 'only' possess Mechanicals, luckily - though the Sirius II head looks otherwise - it is purely a Mechanical Mod. A SS tube with Brass end-caps, containing a Poldiac style Switch Section, but straight forward - no frill design - sans the 'pant', 'shirt' and rings... AND all in 21mm!
Specs:
-Design: Non telescopic, non sectional, consisting of four separate tube configs. (like the GP Paps)
-Construction: 304 SS with Brass caps and comes in 'Brushed' or 'Polished' finish (mix-n-match possibility)
-Purchase flexibility: Choice of Tube sizes available for/on initial purchase (keeps the costs low)
-Parts: Three. The Body Tube, a Switch Section and the 510 cap (though it's sold as part of the Switch)
-Diameter: 21mm
-Length. Total including Switch Section:
............18350 mode = 68.5mm; 18500 mode = 84.5mm; 18650 mode = 98.5mm; 18800 mode = 113.5mm
Where: Vapor Wall
Discount Code: 'FRIEND', takes 7% OFF the cart
Shipping: Peanuts. Was only 6.64 to me (Greece to Canada)
I'll write a detailed review once it comes to my hand.
By vape Art, The Art of vaping | Προϊόντα Ατμίσματος Υψηλής Ποιότητος
Well, went ahead and ordered this today. Another Greek largesse. Had to buy something different, something aside the routine bottom firer, the side firer, or the regular thumb switch...
So, Vapor Wall came to the rescue again, the posters there had only good things to say about this mod, and I thought - why not? I 'only' possess Mechanicals, luckily - though the Sirius II head looks otherwise - it is purely a Mechanical Mod. A SS tube with Brass end-caps, containing a Poldiac style Switch Section, but straight forward - no frill design - sans the 'pant', 'shirt' and rings... AND all in 21mm!
Specs:
-Design: Non telescopic, non sectional, consisting of four separate tube configs. (like the GP Paps)
-Construction: 304 SS with Brass caps and comes in 'Brushed' or 'Polished' finish (mix-n-match possibility)
-Purchase flexibility: Choice of Tube sizes available for/on initial purchase (keeps the costs low)
-Parts: Three. The Body Tube, a Switch Section and the 510 cap (though it's sold as part of the Switch)
-Diameter: 21mm
-Length. Total including Switch Section:
............18350 mode = 68.5mm; 18500 mode = 84.5mm; 18650 mode = 98.5mm; 18800 mode = 113.5mm
Where: Vapor Wall
Discount Code: 'FRIEND', takes 7% OFF the cart
Shipping: Peanuts. Was only 6.64 to me (Greece to Canada)
I'll write a detailed review once it comes to my hand.
those look awesome. do you have a dingo or roller to compare button action to? the engineers at atomixani nailed the action and locking mechanism is something i wish everyone would copy (either bottom or side push).
those look awesome. do you have a dingo or roller to compare button action to? the engineers at atomixani nailed the action and locking mechanism is something i wish everyone would copy (either bottom or side push).
Hi, I don't have the mod yet thus can't opine much. I mainly went for the slimmer form factor and that the switch is recessed, aka flush mounted. Besides, it being a quality mod but at nearly half the price.
Here's a take on it's v1 model's side-by-side with a Roller:
Sirius SS II
By Vape Art, The Art of vaping | Προϊόντα Ατμίσματος Υψηλής Ποιότητος
Well, went ahead and ordered this today. Another Greek largesse. Had to buy something different, something aside the routine bottom firer, the side firer, or the regular thumb switch...
So, Vapor Wall came to the rescue again, the posters there had only good things to say about this mod, and I thought - why not? I 'only' possess Mechanicals, luckily - though the Sirius II head looks otherwise - it is purely a Mechanical Mod. A SS tube with Brass end-caps, containing a Poldiac style Switch Section, but straight forward - no frill design - sans the 'pant', 'shirt' and rings... AND all in 21mm!
Specs:
-Design: Non telescopic, non sectional, consisting of four separate tube configs. (like the GP Paps)
-Construction: 304 SS with Brass caps and comes in 'Brushed' or 'Polished' finish (mix-n-match possibility)
-Purchase flexibility: Choice of Tube sizes available for/on initial purchase (keeps the costs low)
-Parts: Three. The Body Tube, a Switch Section and the 510 cap (though it's sold as part of the Switch)
-Diameter: 21mm
-Length. Total including Switch Section:
............18350 mode = 68.5mm; 18500 mode = 84.5mm; 18650 mode = 98.5mm; 18800 mode = 113.5mm
Where: Vapor Wall
Discount Code: 'FRIEND', takes 7% OFF the cart
Shipping: Peanuts. Was only €6.64 to me (Greece to Canada)
I'll write a detailed review once it comes to my hand.
I opted for the santino or brushed when I ordered mine which should arrive tomorrow, I figure for the price(about 70 bucks for me) it was worth a try. we'll see!
That thing does look pretty nice, The button is unique but kind of throws it off a little though. I would like to see how it actually feels in hand though before passing judgement on it.
I was looking at the natural for a side firing mod but for a few bucks more I opted for the sirius. The shipping was a little slow but I think George at Vape Art got that squared away. I'll find out tomorrow how it feels in hand.
Under permission of the Modder... for arranging / modifying them suiting my review post.
Me too.... ordered the 'brushed' tube, but with a 'polished' switch section... wanted a 2-tone look
i finally got a shipping confirmation from ghostmodder last night. it only shows receipt of electronic notification. hopefully it finds its way to the mail mon. I ordered the 28th.
my kayfun lite should be here mon... 3 days, from Germany! gotta love intaste.
my kayfun lite should be here mon... 3 days, from Germany! gotta love intaste.
He also has a couriering option -- but unfortunately it's too expensive unlike any other. I've mentioned that to him... hopefully he can organize/negotiate something better thru another shipper.
I have always been a fan of bottom fire mods. Although, I love my GG gear. I just tend to struggle with the looks of the button on the Sirrius(although looks and reads like a solid one!). I waffle on the Dingo's also. As bad as I want to buy one, I waffle on the idea.
Anyway, looking forward to your reviews on it.
does anyone have V drop information?
Anyway, looking forward to your reviews on it.
does anyone have V drop information?
It goes to show that we're all different. I prefer side button mods. In fact, the Nemesis I have coming will be my first bottom button.
Bingo!
You will love the Nemesis! I just couldnt get past the finish work on mine...most here will tell you I have a case of the OCD's!
i finally got a shipping confirmation from ghostmodder last night. it only shows receipt of electronic notification. hopefully it finds its way to the mail mon. I ordered the 28th.
my kayfun lite should be here mon... 3 days, from Germany! gotta love intaste.
What you get from ghost modder?
- Status
Similar threads
