High-End Mechanicals Chat, Tips, and Pics

[chadsmo]

Now my question is which do you like more, the X or the V3? Or will it forever be a love triangle?

After just an hour with it I'm going to say that I prefer the V3 switch. It takes almost zero effort to fire it, but yet due to the switch design you can still set it down and it's fine and rock solid with zero wobble. It really is incredible.

Also, it's beautiful.

 

[crazyarms]

Hmm this makes my decision much more difficult. Does the entire switch rotate when locking? I am confused on how the lock ring works. it really does look phenomenal though.

After just an hour with it I'm going to say that I prefer the V3 switch. It takes almost zero effort to fire it, but yet due to the switch design you can still set it down and it's fine and rock solid with zero wobble. It really is incredible.

Also, it's beautiful.

 

[StrikeIII]

Hmm this makes my decision much more difficult. Does the entire switch rotate when locking? I am confused on how the lock ring works. it really does look phenomenal though.

Yes, the whole switch rotates. An amazing design.

Perseas posted the below...
First photo, it is locked, the second one shows it unlocked.

Sent from my Galaxy Note 3 using Tapatalk 4

 

[chadsmo]

Can't pick a favourite.

 

[chadsmo]

For the people that had a question about the switch. It's a fantastic design , the button pretty stays in place height wise while rotating ,and the outer housing is what lowers and raises to lock it. It sounds a little loud on the video but keep in mind I'm using one finger to slowly turn it and the mod like a couple inches from the camera.
http://youtu.be/HzrFrWmVQBo

 

[evgeny131]

I have been absent for a few days:
I switched to micro-coils and cotton in my drippers and i'm loving it.....
Tobh Atty @ 24awg nichrome 6 wrap- 0.19ohm
Quasar same wrap -0.24ohm
beautiful vape.....it is soooo much easier to use cotton....this is one of those "duh" moments...lol

 

[chadsmo]

You're right, that is a 'duh' moment lol.

How do you like that Lux tube there eh?

 

[iacchus]

Playing around with the new CIA Halo cap and G3 tip. Really fond of it so far. The AFC works particularly well.

 

[Say10]

I have been absent for a few days:
I switched to micro-coils and cotton in my drippers and i'm loving it.....
Tobh Atty @ 24awg nichrome 6 wrap- 0.19ohm
Quasar same wrap -0.24ohm
beautiful vape.....it is soooo much easier to use cotton....this is one of those "duh" moments...lol

Want that dripper.
How long have you been on 0 nicotine? I made the switch this week and I'm absolutely loving it. I haven't experienced any nicotine withdrawal as of yet so I'm stoked.

 

[Devilok]

Here's my setup for today...Hades 26650 and TOBH atty, .25 ohms, Bobas Bounty

 

[floridaBMW]

What Ken just said ...

Domo has Heron's in stock. I grabbed one.


Sent from my iPhone using Tapatalk

 

[Kataphraktos]

Here's my setup for today...Hades 26650 and TOBH atty, .25 ohms, Bobas Bounty

View attachment 318148

Funny, I've got a v2 Origen on a Hades right now, vaping Gorilla Juice.

 

[evgeny131]

i'm almost at 0.....1.5mg honestly, and I love it....gonna go to zero soon but there are no withdrawals at all
@chadsmo.......LOVE the lux tube!!!!! Want one....will have one soon.....patience....grrrrrr

 

[chadsmo]

I enjoy nicotine too much to stop using it. I've been at 12 for a while and I'll probably stay here.

 

[floridaBMW]

Hey ev, that TOBH kicked my ..... I set up a .5 dual and it about killed me. Ima hit u up tomorrow. I don't know how u guys do it even at lower mg lol.


Sent from my iPhone using Tapatalk

 

[LReyes66]

While I was cleaning my PB Stingray earlier today, I dropped the brass guiding pin on the floor and after 30+min of looking for it I gave up... for now. As a fix I decided to cut the a piece of of a metal hanger. Will using that affect performance or add voltage drop to my mod?

 

[Dusther]

It will increase your voltage drop for sure.

Now if you have a canister vac or a stand up with a hose attachment. Get a nylon stocking and a rubber band shove the stocking inside the tube and rubber band it on the outside and vacuum the area where you dropped the pin. the nylon will catch it so it doesn't go into the collection chamber of the vac.

 

[TheVapingNinja]

Hey ev, that TOBH kicked my ..... I set up a .5 dual and it about killed me. Ima hit u up tomorrow. I don't know how u guys do it even at lower mg lol.


Sent from my iPhone using Tapatalk

I run 0 mg on the Tobh at 0.31ohms and love it. It's by far my favorite dripper I've owned

 

[evgeny131]

Hey ev, that TOBH kicked my ..... I set up a .5 dual and it about killed me. Ima hit u up tomorrow. I don't know how u guys do it even at lower mg lol.


Sent from my iPhone using Tapatalk

glad u got it...you can safely cut your nic in half....i did as soon as i started using drippers.....went from 12 to 6 to 3 now 1.5

 

[floridaBMW]

Well to be totally honest I run single coil .9 to 1.2 ohm coils. I like a 1 ohm micro with cotton. Depending on atty dual can be a bit to warm for me.


Sent from my iPhone using Tapatalk