How do you label your carts?

[Urban Nightmare]

I'm sure this is an issue with a lot of people and thought we should share ideas. I like to carry a cart of almost every flavour I have in my to-go case. The case its self is an old "Techcessories" computer tool kit from Radio Shack. Got the case 15 years ago and have long lost most of the tools that go in it. So it got converted to hold my vaping supplies. I can fit three bottles of 30ml, my SB or LTVV and an old cigarette (Players) tin (remember when you could get these tins as a promotion). In the tin I carry my carts and spare attomizers.

Any way that was getting off topic. I have about 20 1.2ml tank carts all with different flavours. Problem is it's hard to tell what I've got in what cart. I've tried using 3mm label tape (Brother label maker) but it doesn't stay on very well. If you get any juice or oily finger prints it won't stick very well.

What do you guys use?

Urban Nightmare

 

[steveo9043]

I've used a label maker. Trick I learned is to make sure the label goes all the way around and attaches to the other end of the label.

 

[Concat]

I just fill and refill as I need and carry the bottles around with me. Basically I'm no help and I like the sound of my own voice.

 

[Bdbodger]

Some of the labels you can buy for the brother stick better but can cost more but a better idea might be to go to the dollor store and buy some small zip lock bags and label the bags instead or just put a piece of paper in with them with the flavor written on it . You can get zip lock bags that are about 1 1/2" x 2'' that should fit and they can also catch any leaking if ther is any .

 

[randi.shinney]

I have an engraver that I bought for like $4. I engrave what juice I put in each carto right on the carto. I know for some of the tanks this wouldn't be a good idea, but I've also heard of people putting a drop of nail polish on them. Different color polish for each flavor.

 

[sweetmeat]

You could use colored rubber bands, or different colored drip tips. I find my juices are varied enough that I can tell just by smell though.

 

[spaceballsrules]

I bought some self-adhesive labels at Target (office supplies right next to the Dymo label makers). I write on them, then I use a hobby knife to cut it, and voila!

 

[ruet]

I use these to mark the carto and these to mark the bottles. Works well enough for me.

 

[Urban Nightmare]

Some good ideas here. I like the idea of an engraver. Doesn't ware off then. I'm just not sure if it would work on these tank carts. The label maker I think is the way to go for now. I do over lap the ends but that doesn't always work.

Rubber bands is also a neat idea just have to find small ones in multi colors. Unlike you Sweetmeat I can only tell the difference if they smell/taste is strong. The more subtle flavours give me problems.

Thanks for the input everyone. If anyone else has the "perfect" way please post it.

 

[zer0ith]

I just use a sharpie on the condom of the cartos I'm not using

 

[CCC]

I keep all of my cartos in a box with my juice bottles, they are rubber banded to eachother. I only take the one i am using out because i don't use more than 1 pv at a time.

 

[TrueNorthist]

I use paint markers and make a small puddle of paint on the top of the bottle cap and a dot on the carto/atty. I have only 3 colours right now, but there are dozens of different colour paint markers around. Sticks and dries to anything. See here.There are other makes and retailers for these. A bit pricey but they last for years.

 

[MadValleyVapingMama]

I just use pen, paper & scotch tape. I'm trying to many new flavors on my quest to find a few "to die for" ones that I really like.

 

[apuck]

This may seem a little low-tech, but what about some masking tape and a pen/sharpie...

 

[Room112]

I bought blank Bloog cartos in assorted colours, and each colour corresponds to a juice. I also bought a 510-KR8 adapter so they'll work on my Ego batt.

 

[VIPOD]

Label maker for me...easy to use, select fonts/sizes, makes supplies/inventory look very professional.

Brother International - P-touch Labeling Systems - PT-1090

 

[Sweeney Todd]

I use a silver Sharpie. You have to touch them up from time to time, but it's no big deal.

 

[Nikkita6]

I actually use different colored mouthpieces to keep track of what flavor is in what cart .... I only have five different colors, so I can have no more than 5 different flavors in rotation, but I don't think I would want or need more than that.

I tried labeling them before but I didn't like having a sticker label on my carto ....

 

[Bluesmaster75]

I keep all of my cartos in a box with my juice bottles, they are rubber banded to eachother. I only take the one i am using out because i don't use more than 1 pv at a time.

This is my trick as well.

 

[Silverkm]

I attempted the rubberband / hair elastics; however, I'm too lazy or they fell off... So now I just smell em or dry suck on them to guess. I usually run with 2 flavours at a time so it's usually pretty easy, but I have a box full of old backups that I would be hooped if I ever needed to use them.