How to use this atty?

[Rttch]

I got a couple of atomizers with my Silver Bullet kit and not sure what to use with them. My starter 510 kit came with atties and carts, but the ones from my SB kit are different and won't fit with my other cartridges. My starter 510 atties have a small pipe in the middle of them, with the end cut on a 45 degree angle to make an edge, and the carts have a rubber end with a hole to fit over top of the pipe piece in the atties (and no, I don't mean the end that I vape on). The atties that came with my SB kit have a pipe tube, with a mesh around it, that starts and goes back down into the atty (like a loop).

I emailed the vendor, but haven't gotten a response in a couple of days, so any help would be appreciated. I can take pics and post if none of this makes sense. The other stuff that I got with the SB kit are the tank with the DCT tube tank double coil cartos and two drip tips. The drip tips are different lengths, but nothing in the kit looks like a cartridge. I looked through the product description of the atties and there was nothing there to give me a direction on what to use them with.

 

[mwa102464]

Pipe ? 45% ? Pic's would help Rttch

 

[Hitmetwice]

They sound like bridgless dripping attys.
Dripping only if they are.
Perhaps a dripper would know better.
I'm not one!

 

[wood]

what your looking at is a tank atty compared to an old school standard atty , the one with the 45 degree angle pierces a tank cart. the old school cart is just a mouth piece with a little bit of white cotton like filler that you drip juice on then you would prime the atty itself with a couple drops , most people who use oldschool atties will use a drip tip and just drip a few drops every so often directly on the piece you described as the pipe with the mesh .all that is is a piece of metal in mesh to hold more fluid its covering a little spring looking thing that heats up

 

[DemonCleaner]

I think my mom is the only person left who uses these but theyre what will work with your bridged atty. 510 Cartridge Empty Round Tip 5 Count

 

[wood]

They sound like bridgless dripping attys.
Dripping only if they are.
Perhaps a dripper would know better.
I'm not one!

bridgless are sweet too , but the tube wrapped in mesh he described is the bridge . a bridgless atty has that piece left out so its just the wire exposed or a metal plate with 3 holes covering it , i like the one i got from electro vapour

 

[Rttch]

Pics are coming shortly. I need to reduce the file size of the images.

 

[Rttch]

The starter 510 kit atty is on the left (bought last month and the cartridge doesn't need filler) and the atty that came with my Silver Bullet kit is on the right in each picture.

 

[DemonCleaner]

Yup, get the cartridge in the link above or just use a drip tip.

 

[wood]

i would try using the ones with mesh with a drip tip instead of a cart , they are dripping atties , ha ha ha ha unless your demons mom !, but on your silver bullet that would be great

 

[Rttch]

Sweet, going to try that out now instead of the tank and double coil carts. Going to be awesome if it brings me to the vaping clouds.

 

[DemonCleaner]

Don't be talkin bout my momma! Old people... *shrug* she was still using a VCR up until two years ago.
Seriously though, drippings the way to go, as wood said. Those carts are horse crap.

 

[Rttch]

Still not getting the taste to come through with this method. I tried Awesome Wafflez VG (24 mg). Bummer. Thanks for the quick responses everyone. Looks like I'll be trying to find something else that works (as per my other thread, Pimp my Mod). I dripped directly on the mesh as per a video instruction. Don't know how I could have done anything wrong.

 

[therealcmac]

Sweet, going to try that out now instead of the tank and double coil carts. Going to be awesome if it brings me to the vaping clouds.

Make sure you blow them out first as there may be some primer fluid in there.....

 

[therealcmac]

Still not getting the taste to come through with this method. I tried Awesome Wafflez VG (24 mg). Bummer. Thanks for the quick responses everyone. Looks like I'll be trying to find something else that works (as per my other thread, Pimp my Mod). I dripped directly on the mesh as per a video instruction. Don't know how I could have done anything wrong.

Are you dripping 4 or 5 drops onto the bridge/steel mesh, then you want to take a couple primer puffs and vape......you should be good for 6 or so puffs until you have to drip more....

 

[Rttch]

Yep. I'm getting a lot of vapor, but hardly any taste. It could just be my luck with the juice as other juices have tasted quite strong through my other attempts. Still trying to find my all-day-vape juice.

 

[DemonCleaner]

Also these attys have a slight break in period. Keep at it. The flavour will come through more and more. I'd personally get a low resistance atty or two for 3.7 volts...unless you're stacking battery's at six volts. In which case standard 510 is good.

 

[therealcmac]

Yep. I'm getting a lot of vapor, but hardly any taste. It could just be my luck with the juice as other juices have tasted quite strong through my other attempts. Still trying to find my all-day-vape juice.

Could just be the juice, I have had some juices that had almost no flavor.....finding your ADV is quite a task, but a dripping atty is your best friend in this situation!

 

[Rttch]

Okay, I'll keep at it tomorrow and see how that works. Going to bed for now though. (Only one battery; not stacking two).

 

[wood]

lol im not talking about your momma !!!! it just made me laught
to the OP i live in edmonton if you need a drip tip i have an extra i can toss you