I am weak

[pennysmalls]

Where has my will power gone?! It's fallen and it can't get up!

I've been sitting here with my two ProVari's (Punkin and Pip) looking at the sad looking $5 dripping atomizers that are perched on these two beauties and couldn't stop thinking about the day I'd have some decent toppers for them. I caved. My will power to spread my spending out over time shriveled up and died.

I've got vape mail coming! I just ordered an eBaron Dripper Pro and an IBTanked for my lovelies! I keep face palming myself but at the same time I'm so happy they are coming.

From IBTanked, my first from them, I ordered a 19mm Halfling with Stainless end caps and cloud/silver light swirl for the tank! I can't wait to see how it turns out! I forgot to look and see what state they are in so I don't know what to expect as far as wait time for this vape mail.

The eBaron has me excited cause I love dripping and learning how to build my own coils is something on my to do list. It's no where near the top of my list but this beauty of a dripper will be an awesome stepping stone for me to sort of get a handle on how it's done. This dripper will probably be what helps me decide if building my own coils is really for me. Plus it's supposed to give excellent throat hit to help one lower their nicotine level and that's something I'm really interested in. I'd like to go from 18mg down to 12mg but haven't been able to. We'll see what happens.

Yes! Yes! Yesss! I am excited! I can't wait to see how they both look on my 'Vari's!

 

[Preloader]

Oooooo, can't wait to see a 19mm halfling. That's almost like dripping in itself.

 

[pennysmalls]

I haven't posted pics of my two new ProVari's because I don't have anything decent to put on them. I'll definitely post pics when I get these two toppers!

 

[kbf101998]

Excited for you--can't wait to see your pics!

This place does deplete all willpower on occasion...

 

[gotch23]

Sounds great!

As nice as the provari is... It can only be as good as the toppers you use.

 

[pennysmalls]

Excited for you--can't wait to see your pics!

This place does deplete all willpower on occasion...

I'm hoping my camera can do them justice when it's time to post pics! I've got a cheapy camera, cause I'm a financial tightwad and haven't bought a decent one, well I was a tightwad...lol!

 

[pennysmalls]

Sounds great!

As nice as the provari is... It can only be as good as the toppers you use.

That has been my experience so far. I have a vivi nova and some kanger t3s' and I just think they aren't that great. I want to get away from the clearo's and try other things. I did my research first and hope I'll be happier with what I just bought. In the meantime I'm hanging in there with my dripping atties.

 

[Zbeast08]

Think of your health and your happiness!!

 

[Spydro]

Where has my will power gone?! It's fallen and it can't get up!

I sure know that one well... congrats on pulling the trigger. I too look forward to a picture with a 19mm Halfling.

Sometime yet today 2 new ProVari's are due to be delivered to me, some of the top gear hopefully next week, some of it later as I went custom. Life is good.

 

[Seapup]

Congrats on your new "stuff"! I too would love to see some pics of that 19mm HalfLing.

......I forgot to look and see what state they are in so I don't know what to expect as far as wait time for this vape mail.....

IBTanked is @ Onyx, CA 93255

 

[WhiteHighlights]

Congrats! Everyone else knows about the IBTanked, I'll give you a big thumbs up on the ebaron dripper pro. I've been drooling over it but had overspent my toy budget so it was just a dream. Then a few extra bucks came my way and immediately went out the door. It arrived on Tues. and I'm one happy camper. You will not be disappointed and yes, it may help drop your nic level if you have some favorite juices. Yum!

Did you watch this video? It's just video with music but it's the best one showing how to do the coil, install the cup & wick: THE Dripper Setup By Leo - YouTube. I got some RBA coils (with NR leads that are recommended) from Avid Vapers. I'll try doing my own coils later, but right now I've got a lot going on and I'm trying DYI for juice so I don't want to take that on just yet. There's also a thread in this forum for the ebaron dripper pro with some good info.

I like to drip and a good tank is next on my wish list, but I'm happy I got this first. Lucky you, you get both! Have fun & happy vaping!

 

[Thrasher]

That pro dripper is the bomb, looks fantastic and puts out some mighty tasty vapor.
Leo is a true artist and craftman.

the baron is hand milled from steel blocks, he did not like the quality he got using steel tubes. just be carefull to not flood it too much and have fun.


http://www.e-cigarette-forum.com/forum/provari/347100-ebaron-dripper-pro.html

 

[pennysmalls]

Congrats! Everyone else knows about the IBTanked, I'll give you a big thumbs up on the ebaron dripper pro. I've been drooling over it but had overspent my toy budget so it was just a dream. Then a few extra bucks came my way and immediately went out the door. It arrived on Tues. and I'm one happy camper. You will not be disappointed and yes, it may help drop your nic level if you have some favorite juices. Yum!

Did you watch this video? It's just video with music but it's the best one showing how to do the coil, install the cup & wick: THE Dripper Setup By Leo - YouTube. I got some RBA coils (with NR leads that are recommended) from Avid Vapers. I'll try doing my own coils later, but right now I've got a lot going on and I'm trying DYI for juice so I don't want to take that on just yet. There's also a thread in this forum for the ebaron dripper pro with some good info.

I like to drip and a good tank is next on my wish list, but I'm happy I got this first. Lucky you, you get both! Have fun & happy vaping!

WhiteHighlights how long did it take to receive your eBaron? I've read that it can take quite a long time for some people. Sounds like it gets stuck in customs for days and days in some cases. I'm glad to hear that your liking it so well, you add to the chorus of voices here at ECF singing the praises of this dripper. I'm really looking forward to it! Oh, and I had not come across that particular video yet so thank you.

 

[pennysmalls]

That pro dripper is the bomb, looks fantastic and puts out some mighty tasty vapor.
Leo is a true artist and craftman.

the baron is hand milled from steel blocks, he did not like the quality he got using steel tubes. just be carefull to not flood it too much and have fun.


http://www.e-cigarette-forum.com/forum/provari/347100-ebaron-dripper-pro.html

Hey Thrasher, it certainly is one fine looking piece of metal, perfect for a polished or satin mini. I'm so looking forward to seeing it in person. I have a question that just popped into my head and it may sound dumb but I'm asking anyway. The eBaron will take any kind of 510 drip tip right? Or will I need to pick up some 306 tips?

 

[WhiteHighlights]

WhiteHighlights how long did it take to receive your eBaron? I've read that it can take quite a long time for some people. Sounds like it gets stuck in customs for days and days in some cases. I'm glad to hear that your liking it so well, you add to the chorus of voices here at ECF singing the praises of this dripper. I'm really looking forward to it! Oh, and I had not come across that particular video yet so thank you.

I ordered it on Thursday, it shipped on Friday with an estimated delivery of Monday. Unfortunately, there was a snafu in the UK, the tracking info noted 'connection delay, recovery actions underway' that lost a day. It sailed through customs in NY on Monday, arrived in Boston on Tues. at 11am and was out for delivery in the afternoon. May you be so lucky! BTW - I had to sign for it. I was working from home that day so the delay actually worked in my favor.

Glad you liked the video, I think it's a more elegant & easier way than what PBusardo and others did to install the cup & wick.

I'm looking forward to hearing how you like it too!! Keep us updated!

 

[Thrasher]

Hey Thrasher, it certainly is one fine looking piece of metal, perfect for a polished or satin mini. I'm so looking forward to seeing it in person. I have a question that just popped into my head and it may sound dumb but I'm asking anyway. The eBaron will take any kind of 510 drip tip right? Or will I need to pick up some 306 tips?

regular 510

 

[pennysmalls]

I ordered it on Thursday, it shipped on Friday with an estimated delivery of Monday. Unfortunately, there was a snafu in the UK, the tracking info noted 'connection delay, recovery actions underway' that lost a day. It sailed through customs in NY on Monday, arrived in Boston on Tues. at 11am and was out for delivery in the afternoon. May you be so lucky! BTW - I had to sign for it. I was working from home that day so the delay actually worked in my favor.

Well that doesn't sound bad at all! Maybe I'll have mine by the end of the week then.

Glad you liked the video, I think it's a more elegant & easier way than what PBusardo and others did to install the cup & wick.

I'm looking forward to hearing how you like it too!! Keep us updated!

It does look fairly easy/straightforward in that vid. I'll have to take a good look at how it's set up inside when it arrives before I use it. I'll definitely update this thread when I get mine.

 

[pennysmalls]

regular 510

Thank you Thrasher.

 

[pennysmalls]

I don't like being as busy as I have been. Busy is not my preferred method of living. I enjoy peace and quiet and an empty schedule but life has had other plans for me. I had to have been a monk in a previous life.

I got both my eBarron Dripper Pro and my first IBTanked! I had some trouble with both but I think I've got the hang of them now. My lil' Halfling tank...I love how it turned out, it's really pretty. It's harder than heck though to see the juice in the tank when filling so I did have some messes my first few times. And the Dripper Pro is fantastic! I can vape so much longer with it compared to my little cheapy dripping atties and the eBarron is one good looking peace of metal.

I do have pics! Finally! Now I have to figure out how to get the pics from my phone onto our new computer. We've got windows 8 now and it's way different than windows 7, so hopefully I can get these pics loaded without to much hassle! I don't like hassle lol!

I'll post back with pics soon....keeping fingers crossed!

 

[pennysmalls]

Testing...let's see if I did this right.