After two years of vaping I've finally joined the cult.

[EddardinWinter]

Yes. It uses stainless steel mesh like any other rba (or whatever we're experimenting with this week). It just has 5 screws for more options.

Not all RBAs use mesh....but, that appears to be one that can use it.

You guys eschew RBAs, but every day I see some new rebuilder saying, "my God, why did I wait so long?"

There is a good reason I have spent 400 dollars in RBAs the last 30 days. Mastering them has taken precedence for me over purchasing a new ProVari...sort of. Well, I got one of those, too, but only after procurement of sufficient RBAs...

Try it. You won't regret it. Like the ProVari, you have to experience it to understand.



Tapped out

 

[EvilZoe]

Not all RBAs use mesh....but, that appears to be one that can use it.

You guys eschew RBAs, but every day I see some new rebuilder saying, "my God, why did I wait so long?"

There is a good reason I have spent 400 dollars in RBAs the last 30 days. Mastering them has taken precedence for me over purchasing a new ProVari...sort of. Well, I got one of those, too, but only after procurement of sufficient RBAs...

Try it. You won't regret it. Like the ProVari, you have to experience it to understand.



Tapped out

I'm not "eschewing" it. I just haven't had the patience to sit and do it. There is also a giant pile of stuff in front of me that has been bothering me and I know things will be 100% better as soon as I put the stuff away, no doubt at all, but that hasn't prompted me to actually put it away, even though I knock stuff over every time I move and it is an active pain in my ....

It's my mental state and the way I have to prioritize merely to get through a day that's the deal here, nothing against the rba at all.

There's a thread in General about how I couldn't even get myself to fix a stupid cartotank that was ridiculously hard to pull. Fixing it would have taken all of 2 minutes and I wouldn't be fighting it every time I wanted to vape but something in me just wouldn't stop and do it.



You waste your time trying to make a rational argument in the face of the irrational....lol

 

[Codz]

I've got an RBA that just sits there looking pretty on one of my ProVaris because I'm too lazy to get around to coiling and using it...lol

Just expensive bling at this point, really.

This is so me!

I just haven't got around to using it yet...lol

When you do manage to get it up and running let me know how it vapes, i was considering one of these, although they are a bit pricey and i really do need to learn how to make decent coils before buying any more On the rare occassion i have managed to build a decent coil and get it on my Kayfun Lite, it's the best vape i have had by a mile, but so hard to get it right it just sits there looking swish most of the time!

 

[EvilZoe]

This is so me!



When you do manage to get it up and running let me know how it vapes, i was considering one of these, although they are a bit pricey and i really do need to learn how to make decent coils before buying any more On the rare occassion i have managed to build a decent coil and get it on my Kayfun Lite, it's the best vape i have had by a mile, but so hard to get it right it just sits there looking swish most of the time!

If you watch the review video, coiling it looks like an absolute snap.

That's coming from me who watches something like that and takes to it immediately, though. Your milage may vary...lol

 

[Codz]

If you watch the review video, coiling it looks like an absolute snap.

That's coming from me who watches something like that and takes to it immediately, though. Your milage may vary...lol

I've literally spent hours watching vids on coil builds, etc. I'm fine with making a decent coil... it's getting it on the deck that i struggle with, and sometimes, especially with the KFL getting the wick in just the right position. I've been saying this for a couple of months now, but i will get there eventually

 

[GREEN ZOMBIE]

I've been vaping for 2 years and gone through 6 other APV up to this point because I never believed the Provari was worth the money but after having my iTaste SVD for less than 3 months and having the button fail on me I finally decided to see what all the hype behind the provari was about. Now after only having it for around 25minutes all I can do is quote pBusardo when I say "now I finally understand". Now the next question is what do i buy to put on top of it a Z atty pro or a Ebaron dripper pro?
View attachment 276540

I just use ProTanks and Davides on mine with Aspire BDC's or rebuilt Kanger heads, I tried cartos and flavor sucks and tastes like the filler inside to me plus I think the tanks are ugly, (Just personal opinion) about the only thing I'm eyeing at this point is The Russian 91%... I think I just like bottom coil tank setups. But it's hard to tell till I try something, and what one vaper hates another will always love!

But I say if it looks interesting then try it and see!!!

 

[GREEN ZOMBIE]

I'm not "eschewing" it. I just haven't had the patience to sit and do it. There is also a giant pile of stuff in front of me that has been bothering me and I know things will be 100% better as soon as I put the stuff away, no doubt at all, but that hasn't prompted me to actually put it away, even though I knock stuff over every time I move and it is an active pain in my ....

It's my mental state and the way I have to prioritize merely to get through a day that's the deal here, nothing against the RBA at all.

There's a thread in General about how I couldn't even get myself to fix a stupid cartotank that was ridiculously hard to pull. Fixing it would have taken all of 2 minutes and I wouldn't be fighting it every time I wanted to vape but something in me just wouldn't stop and do it.



You waste your time trying to make a rational argument in the face of the irrational....lol

Hahaha, Zoe funny HeeHee!!!

 

[Codz]

I just use ProTanks and Davides on mine with Aspire BDC's or rebuilt Kanger heads, I tried cartos and flavor sucks and tastes like the filler inside to me plus I think the tanks are ugly, (Just personal opinion) about the only thing I'm eyeing at this point is The Russian 91%... I think I just like bottom coil tank setups. But it's hard to tell till I try something, and what one vaper hates another will always love!

But I say if it looks interesting then try it and see!!!

It's strange how some people really seem to be able to taste the filler whereas others like myself enjoy the flavour in a carto. I find some liquids are much nicer in a carto tank, and others much nicer in a protank (i always use protanks for my menthol flavours). RBAs are the best of both worlds and there arent any flavours i have tried that an RBA doesnt bring the best out of, but for ease of use cartos and protanks, etc almost balance things out!

 

[EvilZoe]

Hahaha, Zoe funny HeeHee!!!

It would be funnier if it weren't the absolute truth.

 

[GREEN ZOMBIE]

It's strange how some people really seem to be able to taste the filler whereas others like myself enjoy the flavour in a carto. I find some liquids are much nicer in a carto tank, and others much nicer in a protank (i always use protanks for my menthol flavours). RBAs are the best of both worlds and there arent any flavours i have tried that an RBA doesnt bring the best out of, but for ease of use cartos and protanks, etc almost balance things out!

Yeah, flavor is very subjective, and then ease of use comes into play, For my relaxing at home I use HH357 drippers and get killer flavor that way, But... I hate dripping... lol, I know there are lots of setups for this as well, But don't see the need to go there yet, Because my dual nano coils inside a ProTank or Aspire head are very close to perfect in flavor and vapor in my book.

 

[GREEN ZOMBIE]

It would be funnier if it weren't the absolute truth.

We are all unique, How boring would it be if we was all the same.

 

[sephirothcloud]

finally bought my provari mini after 1 year of vaping..my 1st RBA smoktek RSST but I finally manage to get my hands on the kayfun lite plus....it's the best

 

[GREEN ZOMBIE]

finally bought my provari mini after 1 year of vaping..my 1st RBA smoktek RSST but I finally manage to get my hands on the kayfun lite plus....it's the best

This makes me want the Russian even more, Did you notice leaking with the RSST?

 

[EddardinWinter]

This makes me want the Russian even more, Did you notice leaking with the RSST?

I have obtained three KFLs while desperately trying to get my hands on a a Russian...

I have one pre-ordered.

My RSST never leaked.


Tapped out

 

[EddardinWinter]

Weird double post thing...





Tapped out

 

[Ozwald]

I've been keeping my eye on the KFL's, but they just say out of stock. I saw them on another site for half the price, but they looked like rip-offs.

 

[EddardinWinter]

I got mine from InTaste. They are never out of stock for long. Put yourself on the notification list...you will hear from them soon. My KFL+ was delivered 3 business days after I ordered it...from Germany.



Tapped out

 

[GREEN ZOMBIE]

I have obtained three KFLs while desperately trying to get my hands on a a Russian...

I have one pre-ordered.

My RSST never leaked.


Tapped out

I ordered a RSST from fastech over a month ago and it's still held up in the hong kong post, But I will not do as others have done and run fastech down, they have done fine by me in the past and customer service is responding fine to my submitted tickets, the issue really is HK post, anyway.

Good to know they don't leak if setup right.

I have lots of patience, I can wait for a Russian, I'm satisfied with my gear, but I like to keep expanding my experiences with different items.

 

[SpettroJoe]

I've been keeping my eye on the KFL's, but they just say out of stock. I saw them on another site for half the price, but they looked like rip-offs.

yes they have some clones of it now so look closely, the clone has the svoemesto logo on the side and no writing on bottom, the real one has logo on the bottom with designed in russia and made in germany.

 

[Ozwald]

yes they have some clones of it now so look closely, the clone has the svoemesto logo on the side and no writing on bottom, the real one has logo on the bottom with designed in russia and made in germany.

I was trying to figure out why they were only charging $50 & change for them & that was the first thing I noticed. I could only find the real ones on vaperev, but it looks like they're in stock at InTaste.