I got mine... well on order

[cosmic charlie]

Finally pulled the trigger on an infinity today and I have a question. I don't see hv attys on the web site but I do see standard EM attys so am I safe to assume they are compatible with the infinity? Also what range of ce2's has anyone used? Will the 2.4-2.8 work or do we need get the 3.0+ ones? Currently I am vaping the 2.2-2.4 ce2s on an ego/510 or standard EM attys@ 6v on my EM indulgence (tired old thing) I think it causes quite a drop in working volts under load because the ce2s perform better on the ego than the indulgence at 3.7v so I'm really looking forward to getting my "big boy" pv!
Thanks in advance oh and if I'm breaking policy droping other pv names please slap my hand and delete this thread

Sent from my DROID2 using Tapatalk

 

[cosmic charlie]

Oh and what kind of cleaning do you all do to the pv itself? Due to the modular nature of the pv I have it it pretty easy to soak the switch in IA or contact cleaner (electrical not for eyes) when I get stick switch syndrome from being a slob dripping

Sent from my DROID2 using Tapatalk

 

[BuzzKill]

Hi Stan , I use 3 ohms Ce2's and they work good and will give you longer battery charge time.
DO NOT wash the Infinity it has electronics in it !!!!!! the switch is sealed and not cleanable.

 

[5cardstud]

Congrats on your Infinity order. You can use the 2.8 ohm and even 2.5 ohm on it the 2.4 will work but that's getting close to the limit of having problems. Some have problems that low some don't. LR attys and cartos won't work and aren't needed anyway on mods unless they're 3.7volt mods. It's a great PV for sure. Welcome to the notcig forum.
I'm with Mike on the 3 Ohm although I have used some 2.8 ohm cartos without any problems. They came out with all these lower Ohm attys/cartos to compete with the mods that were using higher voltages.

 

[Bovinia]

Welcome Stan! I'm glad to see you got some answers to your questions. I'm pretty lazy so all I use are cartos in the 3.x ohm range. I've had my Buzz for about 6mo. and never had a problem at all with the switch or anything else. I have one of the first 25 Infinitys and I haven't had any problems with it either. Buzzkill takes good care of us even when we do have problems.

And yep, unless you are trashing us for another brand it's ok to mention other PVs here

 

[cosmic charlie]

Thanx for the replies! I'll. Probably go with the 3+ ohm ce2s I just wondered about the EM attys as EM's rating of them are 2.3 ohms, I have some of those and didn't see any HV available.

Sent from my DROID2 using Tapatalk

 

[Rosco]

Welcome to the notcig group and congratulations on stepping up your vaping experience.
Tho I don't have the Infinity, I am a strong member of the Buzz army and because I believe in Mike and his products, I will back him and his designs and his users.
When you vape with the best....you really are blessed.

 

[BuzzKill]

Thanx for the replies! I'll. Probably go with the 3+ ohm ce2s I just wondered about the EM attys as EM's rating of them are 2.3 ohms, I have some of those and didn't see any HV available.

Sent from my DROID2 using Tapatalk

The EM 510's are 2.3 ohms the 901's are 2.7 ohms avg.

 

[GMoney]

Finally pulled the trigger on an infinity today and I have a question. I don't see hv attys on the web site but I do see standard EM attys so am I safe to assume they are compatible with the infinity? Also what range of ce2's has anyone used? Will the 2.4-2.8 work or do we need get the 3.0+ ones? Currently I am vaping the 2.2-2.4 ce2s on an ego/510 or standard EM attys@ 6v on my EM indulgence (tired old thing) I think it causes quite a drop in working volts under load because the ce2s perform better on the ego than the indulgence at 3.7v so I'm really looking forward to getting my "big boy" pv!
Thanks in advance oh and if I'm breaking policy droping other pv names please slap my hand and delete this thread

Sent from my DROID2 using Tapatalk

Congrats on your order! Got mine today and loving it so far. The experts will give you all the advice you need, but I thought I would throw my 2 cents in.

My IKV 808 Megas didn't come in because they couldn't find some of the stock they thought they had. So I have been using what I have.

My 3.4Ohm rn4081 cartos work great. I have some IKV 801 Fusions (I screwed up ordering and didn't realize they were 2.5Ohm) They are great, I just leave the Voltage on the lowest setting or just bumped up a little. I picked up some 2.8-3 Ohm Clearomizers(because they looked cool) and I thought they were terrible (I burnt the hell out of them) but maybe it is just me!

Good Luck!

 

[FranC]

Welcome to the Buzz army Stan!!

 

[Ravenscroft]

I use CE2's 2.6 to 2.8 ohms with no problems at all, though they often measure closer to 3 ohms. I found they are great at around 3.95V. But these have been cleaned about 4 times, those things last!
RC

 

[cosmic charlie]

It's here well in town anyway now the new mailperson needs to take the direct route not the one she's been using

Sent from my DROID2 using Tapatalk

 

[Bovinia]

Gratz Stan! Stalking the mail person is half the fun

 

[cosmic charlie]

I want my old mail man back

 

[Rosco]

I want my old mail man back

I wish I could have a young mail lady...front and back.

 

[cosmic charlie]

My lips are numb, my head is spinning, my heart might just jump out of my chest! and I keep having to turn the voltage down!

 

[Bluzeman]

Glad you got your Infinity! I just got my order in yesterday(or day before, don't remember for sure now) so I'm still waiting. Keep my mind off it, I WANT MY INFINITY, ok, got some work to do, I WANT MY INFINITY, time to watch a movie, I WANT MY INFINITY!

OK, deep breath, it will be here soon. Oh did I mention, I WANT MY INFINITY? LOL!

Seriously, it's like when I was a kid, that last week before Christmas!

 

[5cardstud]

I wish I could have a young mail lady...front and back.

Like this one?

My lips are numb, my head is spinning, my heart might just jump out of my chest! and I keep having to turn the voltage down!

Sounds like you are getting it down pretty good.

 

[Bovinia]

My lips are numb, my head is spinning, my heart might just jump out of my chest! and I keep having to turn the voltage down!

Sounds like your Infinity is working it's voodoo on you!!

 

[BuzzKill]

My lips are numb, my head is spinning, my heart might just jump out of my chest! and I keep having to turn the voltage down!

That is the kind of reply I LIKE to hear !!!


BTW I am turning over Tech Support to Mike Mowrey from my company so I can focus on the designs , I have to much on my plate to do it all anymore .