I need a new setup!!!

[Vapoor89]

Hello all, first off I've been vaping for about 2 years I have gained a lot if knowledge (and creeped these fourms for hours) I've had, disposable, blu, egos, and my current setup is: vision slip(silp as it says on the device) running 1 18350, pro tank 2 with 1.8ohm.
I am looking to upgrade on a budget which is why I have a crappy mod now, I'm tired of it dropping power and want something to blow bigger more dense clouds not huge or sub ohm, but decent clouds. I have looked into rba and even doing something like rebuilding the pro tank coil as That seems to be promising but I need something better with a bigger battery staying cheap no more than like $60 for the mod itself every thing else we come I've done so much research my brain hurts lol, but I want some EXPERIENCED vapors opinions on what will work best for me. Any and all responses appreciated. Ps only vape store I have is tribble vapors.

 

[Danbrooks2k]

nautilus and istick mini is a great vape... protank 2 really sucks unless you rebuild it and have the airflow attachment.

If you want to rebuild you have other options and in the long run they will be cheaper...

 

[beez0527]

Check this combo set-up out an istick (20watt) and gs air tank, now this is a china based company so shipping takes 7-10 business days (closer to 7 with my orders). Their prices are good, they seem to always have discounts and their customer service is top notch. Its a great entry level to vv/vw, or you can pair the istick with a nautilus mini for right about your budget.

Eleaf iStick Full Kit with GS Air Clearomizer - Cvapor.com

 

[beez0527]

Check this combo set-up out an istick (20watt) and gs air tank, now this is a china based company so shipping takes 7-10 business days (closer to 7 with my orders). Their prices are good, they seem to always have discounts and their customer service is top notch. Its a great entry level to vv/vw, or you can pair the istick with a nautilus mini for right about your budget.

Eleaf iStick Full Kit with GS Air Clearomizer - Cvapor.com

Also forgot put in happy2015 for extra 8% off.

 

[Vapoor89]

Good stuff, thanks guys, btw this might be dumb but could I wrap a 1.8 ohm coil( I think it was like 12wraps of 28g) could I use it in my pro tank 2 and safely run it on my battery? I saw RIP Trippers make one and it worked excellent but he has super legit stuff where I have a low end mod .

 

[DingerCPA]

I'm more about extended battery life with my rigs. The 18350s just don't last long enough for me. I do run PT2s with airflow controllers and my own built coils (about 1.8 ohms, wicked with cotton) I have a few Nautiluses (with BVCs) I'll run occasionally (I prefer the Mini)

So, iSticks and MVPs are great rigs for the money. Don't have the iStick, but I've heard lots comment that they run hotter than anticipated at lower wattages. Vapor Beast has the 20W for right at $40 http://www.vaporbeast.com/innokin-itaste-mvp-20-watt.html

Vapenw has the iStick for about $25 iStick by Eleaf Simple Pack 20W $24.99 - New Arrivals

 

[SuperTaz]

Hi vapoor and welcome

 

[DingerCPA]

Vapoor - missed your post. I tried wrapping 28g on the kanger heads, and it's TIGHT. I prefer 30g. About 8-9 wraps around a 1/16" drill bit lands me at about 1.8 virtually every time. (Plus, the drillbit sits nicely in the wicking channel so I can get the insulator and the positive contact pin repositioned before I pull the drill bit.

Check Sweet-Vapes for the airflow adapters

 

[beez0527]

Good stuff, thanks guys, btw this might be dumb but could I wrap a 1.8 ohm coil( I think it was like 12wraps of 28g) could I use it in my pro tank 2 and safely run it on my battery? I saw RIP Trippers make one and it worked excellent but he has super legit stuff where I have a low end mod .[/QUOTE

yes you could it would be the same as the stock coils your using now at 1.8.

 

[Vapoor89]

Vapoor - missed your post. I tried wrapping 28g on the kanger heads, and it's TIGHT. I prefer 30g. About 8-9 wraps around a 1/16" drill bit lands me at about 1.8 virtually every time. (Plus, the drillbit sits nicely in the wicking channel so I can get the insulator and the positive contact pin repositioned before I pull the drill bit.

Check Sweet-Vapes for the airflow adapters

Sweet, are you get good flavor and healthy clouds? I would like to keep a setup like that for work and switch to an rda when I get home,that's the goal.

 

[Vapoor89]

Good stuff, thanks guys, btw this might be dumb but could I wrap a 1.8 ohm coil( I think it was like 12wraps of 28g) could I use it in my pro tank 2 and safely run it on my battery? I saw RIP Trippers make one and it worked excellent but he has super legit stuff where I have a low end mod .[/QUOTE

yes you could it would be the same as the stock coils your using now at 1.8.

Thanks lol that's what I thought.

 

[Maines]

I would do an Aspire Atlantis running on and IPV2. IMO

 

[budda503]

I have an Atlantis with sub ohm battery from aspire. Cost me 95 at my local store. I love it and my old charger works with it.

 

[DingerCPA]

Sweet, are you get good flavor and healthy clouds? I would like to keep a setup like that for work and switch to an rda when I get home,that's the goal.

I'm pretty happy with flavor and cloud density. I can't fill a room, but I know I'm blowing a cloud....

Sent from.... ooh look! Something shiny!!!

 

[HMav]

The 1.8 ohm 28awg coil will take a long time to heat due to the wire mass. You will have better luck with 30awg, but for a regular ego batt you should probably go with 32awg.

 

[nessa131]

I got started with a vision spinner 2 and a kanger t3s. I just bought the aspire sub ohm battery and the atlantis tank. It is waiting on me at the post office tomorrow! I cant wait to try it!!!!

 

[Bikenstein]

The new istick 30w is better than the 20w with several upgrades. You can sub ohm with it. I just bought one and getting a Joyetech Delta ll.
33.99 shipped when you sign up for news letter. Check review on youtube on the Delta ll
Electronic Cigarette - Best Electronic Cigarette - Vapor Cigarette Buy the Best Eleaf iStick 30W from www.evape.us

https://www.youtube.com/watch?v=s-DXGH0JKck

 

[lbrasi]

I would do an Aspire Atlantis running on and IPV2. IMO

I would also recommend this setup. I am currently running a IPV2s with an Aspire Atlantis and love it.

 

[carrielsal]

Check this combo set-up out an istick (20watt) and gs air tank, now this is a china based company so shipping takes 7-10 business days (closer to 7 with my orders). Their prices are good, they seem to always have discounts and their customer service is top notch. Its a great entry level to vv/vw, or you can pair the istick with a nautilus mini for right about your budget.

Eleaf iStick Full Kit with GS Air Clearomizer - Cvapor.com

Beware of cvapor.com. I created an account here today and found huge security issues with their site. When you login, the site is not using ssl. Also, the site automatically sends you a welcome email with your password in clear text. If you're not familiar with internet security, this means that your personal date is being transmitted unencrypted. It's equivalent to someone standing on a street corner holding up a sign with all your personal information for anyone to see.

 

[drgonzo3705]

Beware of cvapor.com. I created an account here today and found huge security issues with their site. When you login, the site is not using ssl. Also, the site automatically sends you a welcome email with your password in clear text. If you're not familiar with internet security, this means that your personal date is being transmitted unencrypted. It's equivalent to someone standing on a street corner holding up a sign with all your personal information for anyone to see.

Service was fine from this vendor but I used a disposable prepaid Visa so security wasn't a huge concern for me.

Sent from my Nexus 5 using Tapatalk