Hi Guys,
I am experimenting with a new ceramic coil made for drippers and rebuildables, so far this thing is amazing but I simply cant fit it in ANY of my RTA's or RDA's.
The coil itself is about a quarter of an inch tall and has the outside circumference of a pencil. The ceramic that it's made of is so pourous that it doesn't need any kind of cotton wicking at all, so long as the coils pourous ceramic material can come in contact with the juice.
So basically I need an RTA and an RDA where a coil this large will fit INSIDE the bottom drip-well section of the deck, if one exists, so the ceramic can come in contact with the juice holes on the deck without using cotton.
I have tried to fit it inside of my aromamizer, my goblin v2 mini, the only dripper it fits in is my deadmodz v2, and the only way ive been able to fit it into a tank design so far is putting it inside of the RBA coil head for the joyetech cubis, which isn't the same as an RTA but works incredibly well if I could get it to stop spitting (the cubis spits with regular coils).
Any suggestions on an RTA and an RDA with a drip well large enough to bend this ceramic coil down into? See attached photo for reference.
And just to clarify, I want to be able to bend the ceramic coil downward so the ceramic material on the coil touches the bottom drip well of an RTA and an RDA so I can use this coil in a kayfun sytle RTA without using cotton or wicking material to bring the ejuice to the coil -- the ceramic does that on its own, if its touching the juice.
On an unrelated note, this thing is just incredible, its 0.5 ohms can work in TC or wattage mode can handle up to 80watts at 0.5 ohms without cracking, dry burns blean, wicks without cotton, and the flavor is 10x anything ive tried yet.
I am experimenting with a new ceramic coil made for drippers and rebuildables, so far this thing is amazing but I simply cant fit it in ANY of my RTA's or RDA's.
The coil itself is about a quarter of an inch tall and has the outside circumference of a pencil. The ceramic that it's made of is so pourous that it doesn't need any kind of cotton wicking at all, so long as the coils pourous ceramic material can come in contact with the juice.
So basically I need an RTA and an RDA where a coil this large will fit INSIDE the bottom drip-well section of the deck, if one exists, so the ceramic can come in contact with the juice holes on the deck without using cotton.
I have tried to fit it inside of my aromamizer, my goblin v2 mini, the only dripper it fits in is my deadmodz v2, and the only way ive been able to fit it into a tank design so far is putting it inside of the RBA coil head for the joyetech cubis, which isn't the same as an RTA but works incredibly well if I could get it to stop spitting (the cubis spits with regular coils).
Any suggestions on an RTA and an RDA with a drip well large enough to bend this ceramic coil down into? See attached photo for reference.
And just to clarify, I want to be able to bend the ceramic coil downward so the ceramic material on the coil touches the bottom drip well of an RTA and an RDA so I can use this coil in a kayfun sytle RTA without using cotton or wicking material to bring the ejuice to the coil -- the ceramic does that on its own, if its touching the juice.
On an unrelated note, this thing is just incredible, its 0.5 ohms can work in TC or wattage mode can handle up to 80watts at 0.5 ohms without cracking, dry burns blean, wicks without cotton, and the flavor is 10x anything ive tried yet.
