I need some help with 510 mod box AAA's

[tims]

Ok I got a Rshack 2X AA box nice and small, I was going to use one china 3.7 cell to power it. But after checking things out, and thinking thing over I got some 900 mah AAA's battery's. I rip out everything from the box, and have just room to put 3X AAA's battery's, and it leave room at the top for the atom and button.


There is no room to put the 3X AAA's into a power box, they must lay side by side into the box. So a metal clip to hold the 3X AAA's, and to hook them up will be needed or a pack made, that they could be taking out of easy for recharging them. I hope a clip is sold some place, but I'm not counting on it. So I would need some kind of metal to make a clip, and to hook the power lines into, I'm hoping some one can help with input or helpful advice ???

 

[EldarKinSlayer]

Ok I got a Rshack 2X AA box nice and small, I was going to use one china 3.7 cell to power it. But after checking things out, and thinking thing over I got some 900 mah AAA's battery's. I rip out everything from the box, and have just room to put 3X AAA's battery's, and it leave room at the top for the atom and button.


There is no room to put the 3X AAA's into a power box, they must lay side by side into the box. So a metal clip to hold the 3X AAA's, and to hook them up will be needed or a pack made, that they could be taking out of easy for recharging them. I hope a clip is sold some place, but I'm not counting on it. So I would need some kind of metal to make a clip, and to hook the power lines into, I'm hoping some one can help with input or helpful advice ???

Get a 4xAAA Box from the Shack

 

[kinabaloo]

Sure AAAs are easy to get, and work, to a point. But can't match a high capacity lithium. Just so you know. But you'll know better by trying both

 

[meir]

I want to try this mod but I can't find info on getting a connector or connecting it somehow to the atomizer. How are you doing it? Thanks

 

[NekoGurrl]

I want to try this mod but I can't find info on getting a connector or connecting it somehow to the atomizer. How are you doing it? Thanks

If you don't have a dead 510 battery laying around, you can use a 401 atomizer connector for a 510/dura/titan connector. Both use 7mm .5 thread and the 401 atomizer can be found pretty cheap.

I just finished a mod using a dead dura battery, used a pipe cutter to get it off the tube. Just be carefull to remove the battery first. Then hack saw to split the remainder of the tube off of the adaptor. An 11/64 drill is the right size for pressure fit.

Good luck, and have fun.

 

[cddz]

If you don't have a dead 510 battery laying around, you can use a 401 atomizer connector for a 510/dura/titan connector. Both use 7mm .5 thread and the 401 atomizer can be found pretty cheap.

I just finished a mod using a dead dura battery, used a pipe cutter to get it off the tube. Just be carefull to remove the battery first. Then hack saw to split the remainder of the tube off of the adaptor. An 21/64drill is the right size for pressure fit.

Good luck, and have fun.

Sorry had to correct that real quick. .335-.338 is best for press

 

[meir]

Thanks, I'm definitely gonna try this. I'll let you know how it goes and I'll try to post pics.

 

[mnealtx]

A cheapy 401 charger will work for the 510 atty, as well...but you'll need to either cut some slots for airflow (what I did), ream out the top 1/3 of the threads, or both.

Bonus - you get a charger board for possible inclusion in your mod, should you want it.

 

[Majestic]

If you don't have a dead 510 battery laying around, you can use a 401 atomizer connector for a 510/dura/titan connector. Both use 7mm .5 thread and the 401 atomizer can be found pretty cheap.

I just finished a mod using a dead dura battery, used a pipe cutter to get it off the tube. Just be carefull to remove the battery first. Then hack saw to split the remainder of the tube off of the adaptor. An 11/64 drill is the right size for pressure fit.

Good luck, and have fun.

Thanks for the info !

Are M401 attys and 401 attys one in the same? I'm guessing they are, but figured I would get it clarified before I shop. Thanks!!