I think I have found it!!!

[mrdfield]

So after quite some time and numerous build ranging from 1.0 to 2.2 ohms different
Id ranges I have found a great vape
I have a kayfun 3.1 with 28g kathal wrapped on a 5/64 drill bit 9 wraps coming out to 1.3 to 1.4 ohms with Cotten wick at 11 watts
vaping on a provari 2.5 and a Vaporshark rdna 30
This combination has given me the greatest vape after almost a year of trying all kinds of cool builds
I just want to thank everyone that has posted and replied Yo all have been very helpful
I wouldn't have gotten this far if it wasn't for these forums


Sent from my iPhone using Tapatalk

 

[minitater]

You can't beat success! However.... some folks never stop trying to better what already may be as good as it gets.
I only want to add that if you try rayon in place of the cotton you may like it even better. You may not, but since you have experimented this much so far, I can't see why you would stop now.

 

[Meresya]

As an aside, just make sure you take note of your stats for your success. If a coil lasts months, then by the time you go to rebuild the coil you might have completely forgotten what you used to make the coil. I saw this posted in another thread and kind of glossed over it. Spent the last week trying to figure out what to use for my coil build, only to see everything pointing towards what I thought I just did. Finally, after a week I realized the pointers were all correct, but faulty memory was the problem. The previous build used a different gauge kanthal than I was thinking it was. lol

 

[alexfeetham]

Grats man =) I agree with minitaters comment on trying rayon its pretty damn good. As for me im still experimenting XD I like my sub ohms stuff 0.2 is the lowest I will go at the moment and have tried macro coils, micro coils and just build a nano coil (was built around 0.4mm, super nano???). Vapes like a truck.

 

[WharfRat1976]

So after quite some time and numerous build ranging from 1.0 to 2.2 ohms different
Id ranges I have found a great vape
I have a Kayfun 3.1 with 28g kathal wrapped on a 5/64 drill bit 9 wraps coming out to 1.3 to 1.4 ohms with Cotten wick at 11 watts
Vaping on a provari 2.5 and a Vaporshark rdna 30
This combination has given me the greatest vape after almost a year of trying all kinds of cool builds
I just want to thank everyone that has posted and replied Yo all have been very helpful
I wouldn't have gotten this far if it wasn't for these forums


Sent from my iPhone using Tapatalk

It's better than sex isn't it[emoji12]

Congrats on your awesome build!

 

[Cowboy192]

It's better than sex isn't it[emoji12]

Congrats on your awesome build!

Either your doing something really amazingly right with vaping or really wrong with sex lol

 

[MacTechVpr]

As an aside, just make sure you take note of your stats for your success. If a coil lasts months, then by the time you go to rebuild the coil you might have completely forgotten what you used to make the coil. I saw this posted in another thread and kind of glossed over it. Spent the last week trying to figure out what to use for my coil build, only to see everything pointing towards what I thought I just did. Finally, after a week I realized the pointers were all correct, but faulty memory was the problem. The previous build used a different gauge kanthal than I was thinking it was. lol

Good point M. It helps to have a metric. And new vapers sometimes struggle months or years to develop them. As well to find the most practical inexpensive tools both in hardware (a few $) and in software (web based) to be able to predict exactly what you're going to get...

So after quite some time and numerous build ranging from 1.0 to 2.2 ohms different
Id ranges I have found a great vape
I have a Kayfun 3.1 with 28g kathal wrapped on a 5/64 drill bit 9 wraps coming out to 1.3 to 1.4 ohms with Cotten wick at 11 watts
Vaping on a provari 2.5 and a Vaporshark rdna 30
This combination has given me the greatest vape after almost a year of trying all kinds of cool builds
I just want to thank everyone that has posted and replied Yo all have been very helpful
I wouldn't have gotten this far if it wasn't for these forums


Sent from my iPhone using Tapatalk

Congratulations Mr. Fields. Now that you've figured out it's about temperature and found the parameters to achieve...How about learning how to nail it every time precisely? The basis for this…

…is this…

Super_X_ drifter who conceived the microcoil and I participate on two threads. There we cover techniques for generating a precise proper electrical circuit using the physics principle of tension in seconds. Join us there for all the basics that effect proper installation, operation and maintenance. As close to a manual on vaping as you will find.

Protank MicroCoil Discussion!!
Tensioned Micro Coils. The next step.

A lot of seasoned vets on hand to answer any question.

Good luck.