haha I actually passed on this, I was on the COV preorder site and I said nahhhh. luckily my good buddy fatboystudios convinced me to get one. you saved my .... again bro! thank you soo much FBS!
Last edited:
Iatty assembling video
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
haha I actually passed on this, I was on the COV preorder site and I said nahhhh. luckily my good buddy fatboystudios convinced me to get one. you saved my .... again bro! thank you soo much FBS!
I think it will hits the same Poppa but you can do any resistance you want with Iatty because it will not burn your juice
I think it will hits the same Poppa but you can do any resistance you want with Iatty because it will not burn your juice
Thanks Imeo,
That's what makes the iatty exciting, so many variables when ever I want to experiment.
I assume anyone who has gotten theirs had some predetermined ohm setting in mind to make first. I'm curious if the iatty performed as they had expected it to at those ohms? If not was it over or under their expectations?
Just a quick word on Iatti.
me & Tim are busy assembling the units for our customers & took 20 minutes off to try a unit each.
Well!!!! this thing is what i call "the end game", it is the best tank system or vaping in general that i have ever tried!
flavor,throat hit & consistent performance like nothing i have ever tried.
well Imeo, you set the bar very high this time & i cant wait for the rest of your innovations to come out!
like i said before,being a GG reseller means a lot of excitement.
thanks Imeo,GREAT JOB.
me & Tim are busy assembling the units for our customers & took 20 minutes off to try a unit each.
Well!!!! this thing is what i call "the end game", it is the best tank system or vaping in general that i have ever tried!
flavor,throat hit & consistent performance like nothing i have ever tried.
well Imeo, you set the bar very high this time & i cant wait for the rest of your innovations to come out!
like i said before,being a GG reseller means a lot of excitement.
thanks Imeo,GREAT JOB.
Variables inside Iatty so you can have the best experience:
put any resistance without afraid that it will burn your juice. Even a 1,5 ohm works at 6 volts if you have the wick wet from the start.
adjust the liquid flow by moving the cone
made your own liquid flow by leaving more or little wick showing outside the cone
If you want to increase the liquid flow more than appropriate you can put a thinner wick so more liquid will come inside Iatty from its plastic slots where the wick goes.
You can put a thicker no resistance wire to see a new result. (I havent tried it yet)
put any resistance without afraid that it will burn your juice. Even a 1,5 ohm works at 6 volts if you have the wick wet from the start.
adjust the liquid flow by moving the cone
made your own liquid flow by leaving more or little wick showing outside the cone
If you want to increase the liquid flow more than appropriate you can put a thinner wick so more liquid will come inside Iatty from its plastic slots where the wick goes.
You can put a thicker no resistance wire to see a new result. (I havent tried it yet)
Honestly V2 this really does kick ... just did the 10 quick pulls to try and make it go dry.... no way keeps up sweet and remember a 1.3 ohm coil should be burning the juice but this just copes no worries not met a lr tank that can do that.
Imeo you should patent this design you've got a world beater here my man im giving this a dam good workout as well and by now most tanks/clearos would have given up or run into trouble.
I can't see many of these ending up on the classi's and dare i say it i think this could replce the UFS as the tank system of choice.
BTW this is coming from a man who as a rule can't stand rebuildable attys and tanks
glad i bought two of those
I bought two as well but had to help a guy out so that came first.
I've no doubt i will pick at least another one up some time soon
I've no doubt i will pick at least another one up some time soon
Guys I need some help here... Just recieved my Iatty but I forgot my voltmeter at work last night 
and can't be sure wich one is the resistance and wich one the non-resistance wire... Anyone who got their Iatty from Cam and remembers wich one is in the little plastic bag marked with "W"? 
and can't be sure wich one is the resistance and wich one the non-resistance wire... Anyone who got their Iatty from Cam and remembers wich one is in the little plastic bag marked with "W"? 
Hi Key your resistance wire is the thinner of the two wires should be the one in the bag marked "w"
My bad the non resistance is the "w"
My bad the non resistance is the "w"
Last edited:
Thank you, gentlemen... Just to be sure I watced Imeo's video one more time - it's visible that the resistance wire is thinner and what clavit says is the truth. The marked with "W" is the regular (no resistance) (thicker) wire. Thanks again.
Imeo,
From what I have read here, you have once again hit a Home Run. I am anxiously awaiting the arrival of mine.... of course I wont try it right away as I have a bit of work to do for the community first illustrating it. But, just thinking in the back of my mind (the only part that still works at my age and stage of abuse) that the iAtty combined with your inevitable VV\VW module will make this a true infinity system as far as the possible combinations available to the end user.
-Zor
From what I have read here, you have once again hit a Home Run. I am anxiously awaiting the arrival of mine.... of course I wont try it right away as I have a bit of work to do for the community first illustrating it. But, just thinking in the back of my mind (the only part that still works at my age and stage of abuse) that the iAtty combined with your inevitable VV\VW module will make this a true infinity system as far as the possible combinations available to the end user.
-Zor
I totally agree Zor. Iatty can handle big volts without getting dry so the VV will be a very good add on on the GGTS for the Iatty
If a person only has attys like myself, where might one buy these(ceramic) by themselves
- Status
