Yea i do notice the black rings seem to be scratching off on mine as well.. kind of annoying! that's my favorite part of how they look! hopefully they will fix this going forward..
iclear 30b
- Thread starter rwmeade
- Start date
- th_trl_thread_readers 0
- Status
Yea i do notice the black rings seem to be scratching off on mine as well.. kind of annoying! that's my favorite part of how they look! hopefully they will fix this going forward..
Did you have a leaky protank 3? Ive got three of them that are a month old and not one of them has leaked- they addressed this by changing the grommet (see here http://www.e-cigarette-forum.com/fo...nk-3-heres-why-there-no-gurgling-leaking.html). Im very surprised if you have had leaking issues with the PT3 specifically.
Perfect thread for me atm. I am in between Innokin and Kangertech and which clearo to purchase! It would be going on an eVic. I am considering buying 1 from each company, but I'd like to know which products would be best?
iClear 30, 30s, 30b:
Any of these allow custom driptips?, or do they all involve that rotatable permanent driptip? Are the atrocious black rings on the 30b worth the quality? Think I might have to go with the 30b.
Unitank, Mini PT2, PT2, PT3:
Have mixed reviews about all of these, but I am slowly believing that the PT2 is the most consistent of these.
Any advice would be great!
iClear 30, 30s, 30b:
Any of these allow custom driptips?, or do they all involve that rotatable permanent driptip? Are the atrocious black rings on the 30b worth the quality? Think I might have to go with the 30b.
Unitank, Mini PT2, PT2, PT3:
Have mixed reviews about all of these, but I am slowly believing that the PT2 is the most consistent of these.
Any advice would be great!
Your can REMOVE the Drip Tip on the IClear 30B...
And can use your own custom drip tips on the IClear 30 B...
I'm not having any of the problems with the black rings... they look great and match
well with my MVP 2.O ... I really don't get out where I might rough them up but
I do not handle the Tank (IClear 30B) any gentler than others, I'm sure...
Perhaps in a week or two.. they start showing different results... but for now
they're not.
Last edited:
hmm.. i got the p3 when it first dropped.. the 2 heads it came were both terrible.. so i dont know if thats the reason? my buddy has the same issue with his with leaking.. he got some replacement heads and it seemed to help but only for a day or so.. then back to leaking.
so your saying since the initial release of p3 they fixed something since then and released different versions of it?
even so, I still think the new iclear 30's are both far superior to the kangor series.
Yeah, the very first run had some issues I think according to discount vapers. They only sell the newer ones. The 30b is intriguing, wish it had a glass tank and cheaper heads. If that comes I would jump on it. I like how they offset the coils by 90deg
Woke up this Christmas with Boba's Bounty being tested 100% vg for the 3rd day
in a Innokin IClear 30B... and just can't help believing these new engineered crossed coils
have something to do with the massive thunder CLOUDS of vaporization and choice flavor
that have been showing up since the first day I set this IClear 30B on my MVP 2.0.
I do think Innokin has a winner. They are a little expensive... but... the satisfaction is what
I have been reaching for in vaping.
in a Innokin IClear 30B... and just can't help believing these new engineered crossed coils
have something to do with the massive thunder CLOUDS of vaporization and choice flavor
that have been showing up since the first day I set this IClear 30B on my MVP 2.0.
I do think Innokin has a winner. They are a little expensive... but... the satisfaction is what
I have been reaching for in vaping.
it's not glass but its close, i forgot the name of it but ive been using a juice cracker for past 4 days and no issues whatsoever if that was your concern..
and the heads are expensive because its so new but they will drop eventually.. prob best to get in with a coop for them for the time being until the prices drop a bit
totally agree, 20$ is not that bad for something that works like it should and gives a consistent vaping experience, which is all I really look for and have been disappointed in all clearos up until now. Innokin finally seems to have made it right!
I'm not sure how you guys can say this tank is so good. I bought 2 of them and they both have a metallic taste and a scratchy throat hit. Honestly I hate them... I keep thinking they will break in but they don't seem to be getting any better. I do agree that you get clouds of vapor but the taste is WAY off. I'm using 70/30 juice and they just don't work like they should.
How's the vapor (warm, cool), and pull/draw (tight, airy, tighter than PT?) on these? Flavor better, same, worse than the regular Iclear16/30s?
I like the fact the the 16B now holds 2.4ml of liquid as compared to the original 1.6ml. Now that these are 2.4, I might replace my T2's with Iclear16Bs if it's not a cold vape.
Also, on the last Innokin coil head box, the 16B was listed with the 30B as well as a 16D... so there's something else coming
But the all take different heads.
I like the fact the the 16B now holds 2.4ml of liquid as compared to the original 1.6ml. Now that these are 2.4, I might replace my T2's with Iclear16Bs if it's not a cold vape.
Also, on the last Innokin coil head box, the 16B was listed with the 30B as well as a 16D... so there's something else coming
But the all take different heads.
Vapor is warm enough, draw is perfect... Tighter then the Protank but not as tight as the iclear 16. Taste is not good
I'm really sorry about your bad experience... I'm having none... but the very best of experiences.
I have and am using 100% VG then 50/50 VG/PG and 80 PG/20VG and it doesn't matter
all are vaping much better with my Innokin's 30B's than with any of the many other Clearomizers
that I've used to date... and that's quite a few different ones.
Thanks for the feedback.
There seems be be a love it or hate it as far as the reviews of the flavor for the new iClear30B -- and it's about evenly split. I will just have to try them out, as I did with the PT (high praise, but every single one I've tried, including the miniPT2 -- the flavor is very metallic and nasty). Time will tell.
There seems be be a love it or hate it as far as the reviews of the flavor for the new iClear30B -- and it's about evenly split. I will just have to try them out, as I did with the PT (high praise, but every single one I've tried, including the miniPT2 -- the flavor is very metallic and nasty). Time will tell.
I am agreed about the PT... The iclear 30b, to me, tastes exactly the same as the PT. That being said, I just removed two of the wicks in the top coil which helped a lot. Still not great but much better.
I just got two in the mail. One of them I am absolutely unable to unscrew the base - any ideas? On the other one I tried to use the adaptor I have for the vv Triton battery, but while it all goes together the Iclear won't fire. If anyone has any ideas how to fix these two problems I'd love to hear them!
I picked up 2 today and I like them. The draw is right on, much less airy than any of my Protanks (1,2 and 3) and flavor is great. I did switch from the metal to a plastic drip tip but that is personal preference. So far with Suicide Bunny Sucker Punch im very happy. Not quite a carto tank flavor but really close. Innokin has been putting out some great products, the iclear 30s have been in heavy rotation as well and working really good with whatever juice I put in
mmkay and which clearomizer on the market is better in your opinion? and please don't say the protank series..
- Status
Similar threads
