iClear30, Protank or something else with an MVP 2?

Status
Not open for further replies.

RubyRoo

Super Member
ECF Veteran
Aug 12, 2013
690
518
Colorado Springs, CO
Shellro07! I have an MPV 2.0 and I have no problems with the Protank 2, Mini Pros, iClear 16s, and iClear 30s. Thinking about trying the new 30s and the Aspire BDC (the glass one). Good luck to you and you'll really like that MVP. Also, where in Colorado are you from? I've lived all over the state and currently reside in Colorado Springs. Cheers!
 

shellro07

Super Member
ECF Veteran
Nov 3, 2013
312
327
Colorado, USA
Shellro07! I have an MPV 2.0 and I have no problems with the Protank 2, Mini Pros, iClear 16s, and iClear 30s. Thinking about trying the new 30s and the Aspire BDC (the glass one). Good luck to you and you'll really like that MVP. Also, where in Colorado are you from? I've lived all over the state and currently reside in Colorado Springs. Cheers!
Hey there fellow Coloradan! I live in Grand Junction now but I love Colorado Springs! What a great city! Thank you for your input too!
 

Harleybarbie

Ultra Member
ECF Veteran
Verified Member
Nov 7, 2009
1,558
3,557
Wonderland
I've been using the PT1, Mini1, Mini & Regular Vivi's & also fasttech's X-9 tanks. I gave my iC30 to my DH. He loves it!

I like them all! This week I've been rockin' my PT1 & X9's (polycarbonate) tanks, it seems that I have to move the pin out a bit sometimes on the X9 but I like the bigger tanks on that big battery!

I've ordered PT2 clones from fasttech this past Sunday... The glass seems to be thinner, but we'll see when they get here.

If I was made of money, I'd be buying the large Anyvape Davides... Love the way they look on my sister's MVP!

I just love my MVP!

I also own 2 Innokin itazte VV 3.0's. I love them too!
This week I've put one of my VV 3.0's in my purse, just in case, so now I only carry only one VV 3.0 on me along with my MVP in my scrub pocket during work.





Sent from my iThingy using Tapatalk
 

shellro07

Super Member
ECF Veteran
Nov 3, 2013
312
327
Colorado, USA
Started with the original iclear30 that it came with, loved it, performed great. Later on, the Protank2 became my tank of choice due to the cooler flavor and crisp taste, but couldn't fire my device higher than 4v or 7w without getting a hint of burnt taste.

Then along came the iclear30-s and pretty much bumped my PT2 onto an ego battery and my iclear30 into my parts box...

dxxm34.jpg


For me, the 30-s is a match made perfect, taste and vapor for my 100% VG is on the borderline of too much ;)
Wow! That tank looks like a machine! :) So that's the iclear 30-s? May have to try that too. Thanks!
 
Last edited:

shellro07

Super Member
ECF Veteran
Nov 3, 2013
312
327
Colorado, USA
In all honesty, with any of the MVP's you would want to go with cartos-double punched. I've found that they give the best taste and vapor (although I'm a carto fan-trying not to be bias). I think that there's a lot more work that goes into wicks than need-be. Cartos are easy and tend to last longer if you know how to make that happen. I love all MVP's, the original, MVP 2 and the MVP vvv3.

I give clearo's respect, but more and more people are leaning off of them for good reason. The only thing close to a clearo I will use is a clear-carto.which is basically a carto but with the wicks inside instead of mesh.
Shaybabe.15, when you say cartos-double punched, which ones would you recommend and where would I find them? Also, are people leaning off the clearos due to leaking or some other reason? Several other people had recommended cartos too so I was just wondering.....
 
Last edited:

el Jexican

Super Member
ECF Veteran
Verified Member
Oct 10, 2013
314
483
Baltimore, Maryland
I prefer the PT2 to the iClear 30 that came with it. What it comes down to is airflow, the iClear is a little too tight of a draw for my liking. Although, the MVP 2 did handle my 1.1 ohm dual cual AGA-TD just fine. When I'm out in about (thats when I use the MVP) I prefer to take the PT2 or iClear.
 

Amberina

Super Member
ECF Veteran
Verified Member
Sep 6, 2013
561
1,806
Las Vegas, NV
I also have a MVP 2 and I like my protank 2 with it. I did try the iclear 30 that it came with but for me it was much too strong and made all my juices taste like chemicals. I could taste the wicks very strongly. I may be a bit sensitive to it though. I also love carto tanks and the are my favorite to use when I'm not using my mvp. They do not work with the mvp because the center pin is a bit too low- and I did try them with a connector but I do not like the weird/airy draw that I get with them.
I really like the draw and the vapor that I get from the protank 2. I do like my flavors a bit cooler though because I vape a lot and get overwhelmed with flavors that are to strong.
It will definitely come down to personal preference. Do you like a warmer, strong flavor (use the iclear 30) or a cooler, lighter flavor (use the protank 2).
You will find what is perfect for you!
Good luck!!
 

Lois2013

Ultra Member
ECF Veteran
Verified Member
Sep 7, 2013
1,660
9,902
Pittsburgh, PA
I've been using the PT1, Mini1, Mini & Regular Vivi's & also Fasttech's X-9 tanks. I gave my iC30 to my DH. He loves it!

I like them all! This week I've been rockin' my PT1 & X9's (polycarbonate) tanks, it seems that I have to move the pin out a bit sometimes on the X9 but I like the bigger tanks on that big battery!

I've ordered PT2 clones from Fasttech this past Sunday... The glass seems to be thinner, but we'll see when they get here.

If I was made of money, I'd be buying the large Anyvape Davides... Love the way they look on my sister's MVP!

I just love my MVP!

I also own 2 Innokin itazte VV 3.0's. I love them too!
This week I've put one of my VV 3.0's in my purse, just in case, so now I only carry only one VV 3.0 on me along with my MVP in my scrub pocket during work.





Sent from my iThingy using Tapatalk

I was just looking to get a vv/vw, and can't decide (a little overwhelmed by all the choices)

I use a Halo Triton right now (was my first PV - I've only been vaping 2 mos). I want vv, because I have some juices that are just really muted at 3.7v, and I have been dabbling in dripping with an atomizer also, and want to try the range of flavor that vv provides.

Anyway, I saw the v3.0 on Fasttech and it looks like exactly what I'm looking for, but the price seems really low!!! Is this legit?? It doesn't say Innokin in the description, but it shows the logo one one of the pics...

www.fasttech.com/product/1383905-itaste-vw-v3-0-7-in-1-variable-voltage


Sent from my iPhone using Tapatalk - now Free
 

Lois2013

Ultra Member
ECF Veteran
Verified Member
Sep 7, 2013
1,660
9,902
Pittsburgh, PA
I was just looking to get a vv/vw, and can't decide (a little overwhelmed by all the choices)

I use a Halo Triton right now (was my first PV - I've only been vaping 2 mos). I want vv, because I have some juices that are just really muted at 3.7v, and I have been dabbling in dripping with an atomizer also, and want to try the range of flavor that vv provides.

Anyway, I saw the v3.0 on Fasttech and it looks like exactly what I'm looking for, but the price seems really low!!! Is this legit?? It doesn't say Innokin in the description, but it shows the logo one one of the pics...

www.fasttech.com/product/1383905-itaste-vw-v3-0-7-in-1-variable-voltage


Sent from my iPhone using Tapatalk - now Free

Sorry, didn't mean to go off topic...just seemed like you guys were familiar with fasttech


Sent from my iPhone using Tapatalk - now Free
 

RubyRoo

Super Member
ECF Veteran
Aug 12, 2013
690
518
Colorado Springs, CO
Sorry, didn't mean to go off topic...just seemed like you guys were familiar with fasttech


Sent from my iPhone using Tapatalk - now Free

That is a good price for the full kit and if you don't mind waiting around for a while for it, Fasttech is SLOW as heck. If you already have some good tanks, go for the express kit, it's even less!
 
Status
Not open for further replies.

Users who are viewing this thread