Can someone tell me how many wraps for each coil with 34gauge kanthol to get somewhere between 1.5 and 2 ohms. I will be running those on a provari, thanks in advance
- Status
You would need each coil to be at 3 ohms in order to have dual coils reading 1.5ohms on the provari.
I would say try 4/5 on one coil and test it. If it is around 3 then build the second coil. But 2 coils at 2 ohms will be 1 ohm total, because they are parallel connections.
Edit: it may take a 5/6 because i think 4/5 will be around 2.5ohms, putting you are 1.25 to 1.3 total
I would say try 4/5 on one coil and test it. If it is around 3 then build the second coil. But 2 coils at 2 ohms will be 1 ohm total, because they are parallel connections.
Edit: it may take a 5/6 because i think 4/5 will be around 2.5ohms, putting you are 1.25 to 1.3 total
- Status
Similar threads
