Iken Beta HV 4.5ohm Atty

[mwa102464]

It's funny there has been so much discussion and excitement over the new i06 Atty that I haven't seen anything on Issac's new HV 4.5ohm Atty. so I would like to start a thread to see what other users think of these 4.5ohm Atty's.

I happen to really just put one on my Reo Grand and I'm running 2 AW 16340 3.7 Batts for 7.4V vaping and I'm blowing stacks of vapor with these. The one thing I'm noticing above everything else is the heat is not nearly what I've seen in the past with 7.4v vaping. It's actually rather cool for 7.4v in my opinion compared to what I've experianced over the past two years at 7.4v and a cooler vape then an LR Atty which blew me away.

Again it's my first night using these so I cant totally put my entire review into these HV Atty's but OMG I cant believe how nice these are vaping so far and the temp there running at for 7.4. I would like to hear from anyone else that's using them and what they think.


Thanks,

MWA

 

[mwa102464]

Backed it down to 2 x 3.2 LiFePO4 Batts for 6V and its a better vape, the 7.4, it ended up getting a bit scratchy in the back of the throat after a little while of vaping the new HV 4.5 ohm Atty. The 6V is the way to go and still a cooler vape than the 3.5 HV Iken and just a really nice vape so far with this Atty now.!

 

[Switched]

It's funny there has been so much discussion and excitement over the new i06 Atty that I haven't seen anything on Issac's new HV 4.5ohm Atty. so I would like to start a thread to see what other users think of these 4.5ohm Atty's.

I happen to really just put one on my Reo Grand and I'm running 2 AW 16340 3.7 Batts for 7.4V Vaping and I'm blowing stacks of vapor with these. The one thing I'm noticing above everything else is the heat is not nearly what I've seen in the past with 7.4v vaping. It's actually rather cool for 7.4v in my opinion compared to what I've experianced over the past two years at 7.4v and a cooler vape then an LR Atty which blew me away.

Again it's my first night using these so I cant totally put my entire review into these HV Atty's but OMG I cant believe how nice these are vaping so far and the temp there running at for 7.4. I would like to hear from anyone else that's using them and what they think.


Thanks,

MWA

These are not BETA tests, but full blown previously produced atties making a return. These are the original atties that made IKV a benchmark for the market place. I am glad he returned to his grass roots

Backed it down to 2 x 3.2 LiFePO4 Batts for 6V and its a better vape, the 7.4, it ended up getting a bit scratchy in the back of the throat after a little while of vaping the new HV 4.5 ohm Atty. The 6V is the way to go and still a cooler vape than the 3.5 HV Iken and just a really nice vape so far with this Atty now.!

They used to come in at 5.2 for 7.4V which was a better vape 10W. The 4.5s are running at 12. Yes indeed you will find them better at 6V (8W). FWIW many have found the sweet spot with their VVs at 8W to include but not limited to the Darwin users, where the majority of the time their device is set for 8W or lower.

For those on a budget, it goes to show that you can find vaping bliss without the fancy electronics, if ya know how to match atty resistance with your set up

 

[5cardstud]

These are not BETA tests, but full blown previously produced atties making a return. These are the original atties that made IKV a benchmark for the market place. I am glad he returned to his grass roots

For those on a budget, it goes to show that you can find vaping bliss without the fancy electronics, if ya know how to match atty resistance with your set up

I couldn't agree more. With both the statements.

 

[mwa102464]

Sorry use to saying Beta,, I never saw this exact Atty before from Issac so I guess I must have missed this one over the years Switched, I thought these new Shiney HV 4.5 ohm Attys where also from a new and different manufacturer then his previous edition Atty's ? I also haven't seen any post on it anywhere on Issacs threads. So if that's the case then yup I've just flat out missed them all this time. I remember and have some of the older ones and these look different to me and seem to perform differently as well, but again if I missed them than my bad.

 

[Switched]

Isaac returned to his original mfr, amd it was because of these atties that I am here That is where the Goodness Started AFAIC

 

[mwa102464]

I to can remember those original days Switcher and its why I am here as well, whatever the case I really like these and I haven't used a 4.5ohm 510 in some time from Issac and to see these back is nice. They do however seem to be a bit different to me in performance from the old ones though and not the exact same because they dont run as hot to me as the older ones did, this was my main point. I dont know what was changed but there seems to be something different about them, FOR THE BETTER !!!

 

[loft]

I have one on the way - I've never had much luck with any 510 atomizers, but I felt I needed to at least give it a chance.

 

[Switched]

I to can remember those original days Switcher and its why I am here as well, whatever the case I really like these and I haven't used a 4.5ohm 510 in some time from Issac and to see these back is nice. They do however seem to be a bit different to me in performance from the old ones though and not the exact same because they dont run as hot to me as the older ones did, this was my main point. I dont know what was changed but there seems to be something different about them, FOR THE BETTER !!!

I hearv you Matt. The only thing I may suggest, is that you have forgotten how good they were

 

[mwa102464]

I hearv you Matt. The only thing I may suggest, is that you have forgotten how good they were

Been cranking on one of these mugs all day at about 6.5V and liking me this 4.5ohmer