Latest Batch of Iken 510's

[mwa102464]

All I can say is these are the best dam Atty's I have used so far. The draw and airflow on this latest Batch of 510 Atty's is super. I like the 2ohm a lot and since using the HV-510 these are just awesome. The airflow and draw is just so smooth on this batch of Atty's there a real pleasure to vape using these over others in my opinion, there worth every cent.


Thanks Issac, your hard work & commitment to improving the vaping community far surpasses many other suppliers and is what puts you & Ikenvape.com over the top..!!!

 

[Vaporologist]

Thanks for your feedback, mwa! I haven't tried these yet, and now I can't wait to try them.

 

[thedudeabides]

Good to hear! I picked up some to use in the UFS but based on your review I may need to try one a bit earlier!

 

[mwa102464]

This is by far the smoothest 510 Atty I have ever used that's no BS either. I'm running these anywhere between 5v-6v and they are not hot in the least degree, they run on the cool side so don't be afraid to push them either, I just can't get over how smooth these are, theres nothing else like em on the market and I've been through every dam 510 there is..!! nough said.!! I may be wrong but I think they are American made too.

 

[Vaping Monkey]

IKENVAPE's attys all rock, I received 801s (mini and full) for a trade job and I still ordered more 306s and 510s!! I'm a 801 fan, but Ikenvape's 510 atties perform outstandingly..vaper production and reliability on working is top notch..Plus Isaac's a cool guy. I highly recommend it and use his atties on all my review vids (unless it's on a 3.7, then I use LR, otherwise, it's all Ikenvape).

 

[Scorched]

I have been meaning to ask; with the new USA internals of the atomizer is anything different aside from the draw on these atomizers? How does the USA internals make them different?

 

[atavanhalen]

I have been meaning to ask; with the new USA internals of the atomizer is anything different aside from the draw on these atomizers? How does the USA internals make them different?

They look the same to me and do not have an old one to compare. One thing thats make them different is that by buying them you supporting the American economy in more ways than one

 

[Switched]

I have been meaning to ask; with the new USA internals of the atomizer is anything different aside from the draw on these atomizers? How does the USA internals make them different?

Trade secrets. Tsk tsk!

 

[chainvapor]

Yeah, I picked up 5 of these latest 510 HV attys and got them today. They are AWESOME!! When I ordered there were 189 in stock. I just went back and there are now 39 in stock. Well 34 now cause I ordered 5 more. Wanted to get them before they are gone again! These are by far the best atties I have ever used. I am vaping using these HV 510 atties with 2 Tenergy LifePo4 batts combined with the Prodigy V3.1 and I am in vaping heaven!!!!!!!!!!!!!!!!

CV

 

[Vaping Monkey]

Yeah, I picked up 5 of these latest 510 HV attys and got them today. They are AWESOME!! When I ordered there were 189 in stock. I just went back and there are now 39 in stock. Well 34 now cause I ordered 5 more. Wanted to get them before they are gone again! These are by far the best atties I have ever used. I am vaping using these HV 510 atties with 2 Tenergy LifePo4 batts combined with the Prodigy V3.1 and I am in vaping heaven!!!!!!!!!!!!!!!!

CV

Yup...I'm currently swtiching back and forth from the 510, the 306, and the 801 from IKV..all hv atties produce awesome vapor production and performance. I'm actually going to give away some IKV atties on my debut show this 25th of March @ 11pm pacific time on ElixirTV...along with juices and other good stuff..but all in all these atties are really good.

 

[Sewknitty]

11pm pacific...I'm in eastern time zone...eek, math! I'm heading to Elixir just in case. Based on your YouTube videos we have the same taste in attys! Oh wait...I don't have to do math until tomorrow. Phew!

 

[VaporTrailz]

Im confused...I bought two of the Ikenvape 510 HV atties and both are getting very hot on my 5V passthrough.

Any ideas or suggestions?

 

[Switched]

Im confused...I bought two of the Ikenvape 510 HV atties and both are getting very hot on my 5V passthrough.

Any ideas or suggestions?

Yup! Use 'em on a true 5V device. Although a USB port puts out 5V it does not supply enough current to adequately fire atties.

 

[chainvapor]

I Agree with Switched here. I have used 4 of these so far and they all work awesome on my 6V Prodigy. If you do not push enough current through them, they will get really hot.

That is like my older Joye510 atties that still work but not really good. They usually get really hot when I use them, but they do not put out all that much vapor. That is how I know when an atomizer needs cleaning, or needs to be chucked in the garbage.

CV

 

[VaporTrailz]

Thanks for the input Switched and chainvapor....I'm actually using the 5V passthrough and IkenVape 510 HV atty on the USB port on a Kensington laptop AC adapter...there is a definite power difference between the USB port on the AC adapter and the USB port on the computer.

On that note, the atty seems to run slightly cooler when the passthrough is connected to the PC.

The extra heat may be due to my juices....Im vaping Tasty Vapor Tobacco and Tasty Vapor Cherry Cola....both are thick dark carto killing juices. They may be clogging the atty quickly causing it to run hotter?

Or it may be my long hits...although I do try to tap the power button when taking a hit rather than hold it down.

I wish I had access to a high voltage battery powered mod to try these attys with that....not in the budget for now

 

[Sewknitty]

These are good, for sure. I keep typing out words and erasing them because I can't define the 'solid' feeling. They've got great air flow and...they're just solid. There I go again.

I have another brand atty with a measly bridge. The vape on it feels insubstantial - thin, if that makes sense - and it develops a metallic undertone rather quickly that blow outs and Purge can't fix. The draw isn't tight but it isn't...generous. The IkenVape 510 is the opposite of that - full vapor, magnificent air flow, no metallic taste even after a week of frequent blow outs.

One thing I've noticed is, the airflow is too good for my bottom feeders but I prefer the IkenVape 306 for those anyway. And, they're pretty.