- Status
the protank is pyrex but I'm looking to find out what IKV carto tank is made of.
Well ..... Ike, never mind what I said about you not wanting to get into RBA’s DO IT.
These are the only frogs I have kissed/vaped that turned into a prince better looking than the fusion frog did BUT dam Ike, you know how much work it is to hold these frogs down so you can vape/kiss them and see what they turn into? Yes I see from the photo you do. Good Luck, maybe I’ll get into it again with your stuff but tend to be going KISS in my old age. NOW if you get a line on ceramic wicks, ribbon wire and pre oxidized mesh, just put them on your list, "trust me"…………
PS you wound any sub-one ohm's yet?
but you know the stuff you do sell is getting so good maybe all this RBA isn't worth the trouble, none of the RBA frogs i have kissed became anything with a kingdom, just nice bodies, like the Fusion.
Well just looked at the AEROVAPES and as Stewie says:
You will get these, YES you will Ike, even Ruport say yes you will.
And sell them so we won’t have to remortgage our houses to buy them the way you will [have done] do to stock them.
“yes, yes you will”
Last edited:
Oh my bad. Sorry. The IKV Fusion Tank 6ml. is made of Polycarbonate with chrome metal end caps.
I could not have put it better. One of the main reasons I got into vaping was because I'll be damned if I'm going to pay $5.00 back them for a pack of cigarettes I used to sell in Jr. Hi for $.25 a pack. Then I fell into the latest and greatest trap that most vapers fall into. I caught myself one day and thought I didn't get into this to pay $450.00 for a PV, or a tank system. That's when I knew I had the latest and greatest syndrome. I haven't found anything that vapes as good as a Fusion plus it is Kiss or the I06 and many other Ikenvape cartos/attys. If I didn't have anything better to do with my money and had enough to toss around like a sailor on shore leave maybe then I would pick up everything that comes out. Ikenvape products work the best in my opinion and have the best price. I know he always has sometrhing new coming up that is the latest and greates but his are reasonably priced.
What it amounts to is he listens to his customers and gives them what they are looking for with their vaping needs at heart. What China is doing is listening to their, and everyone elses, customers with their pocketbooks at heart.
Damn the torpedos, Full speed ahead!
Last edited:
YES, thank you 5C and Ike, from a sailor who has been throwing his $ around {OK honey, drinking isn't a hobby [DON'T ever tell her this, TRUST me, even it you go offshore and don't drink], how about playing with the newest vaping stuff?} WHAT WE SAY IS TRUE
As long as it tastes good, works good, and I don't have to do the hand rotation before each puff I'm all good. I'm always looking for a better and healthier vape.
I went into the new ecig store down the street (Vaperz) to see what they were doing and the guy told me anything over 4.3 volt that I was destroying my lungs. I said it depends on what resistance your atomizer is at and the wattage your vaping at. He said wattage and resistance don't have anything to do with it. Told me that's what the FDA said and they are gospel. Imagine how much damage he is doing to the vaping public telling his customers all that hogwash.
Oh and I told him I had bronchitis and copd when I started vaping but that I had just had a procedure done on my throat. While the doc had me under he checked out my lungs and bronchial tubes and told me they were perfect. The lady with me confirmed it but that old fuddy duddy wasn't havin it. If the FDA don't tell him then it's wrong.
I went into the new ecig store down the street (Vaperz) to see what they were doing and the guy told me anything over 4.3 volt that I was destroying my lungs. I said it depends on what resistance your atomizer is at and the wattage your vaping at. He said wattage and resistance don't have anything to do with it. Told me that's what the FDA said and they are gospel. Imagine how much damage he is doing to the vaping public telling his customers all that hogwash.
Oh and I told him I had bronchitis and copd when I started vaping but that I had just had a procedure done on my throat. While the doc had me under he checked out my lungs and bronchial tubes and told me they were perfect. The lady with me confirmed it but that old fuddy duddy wasn't havin it. If the FDA don't tell him then it's wrong.
Last edited:
What kind of oxymoron is an ecig salesman quoting the FDA, I wouldn’t have even contained the conversation, like continuing to listen to Holder talk about constitutional rights, not productive but glad you stuck it out, better man than I am 5C
Well to be honest I finally give up. He was one of them guys that know everything and has no more to learn. I figured I would do more harm than good to continue the conversation.
Last edited:
Iken bro you might be getting a few wholesale inquiries from vegas soon we have had an influx of B&M's open like breeding rabbits and wellllllll they asked so I told /ducks and heads for cover!
Iken the platinums that are in are they at 8.50 like there supposed to be or 8.35 like last time?
Tj, I use the Plats and my trippys fit on them just fine. But I didn't order any from the last batch so I don't know if that changed.
If you want to try some, I can send you a few to try. Just pm me your address.
If you want to try some, I can send you a few to try. Just pm me your address.
Last edited:
I found the new tank on the site, but no replacement EVOD coils. Are these coming soon, or am I just looking in the wrong section?
at the risk of sounding like a fool by coughing vapor through my nose I gladly accept and since it's vapor, it was painless
That...is...Hilarious Charlie!
The wholesale price is awfully ridiculous so obtaining a 2nd mortgage is the keyword here. They also included a list suggesting the retail prices. I'm getting better at wrapping, the oxidizing part is the real pain (pre-oxidized he says, HA!). I have a handy torch and all kinds of supplies. 30G and 32G in abundance straight from Tecmo and a significant amount of mesh from the Mesh company. One is here and the latter in transit. The Mrs really wants me to get on board with this so she was seeking advice from a member here through PMs. After all this fiddling around. I picked my evod and ego auto, unthreaded, filled up and breathed, dropped it like a mic and said DONE! KISS that!
From shopping around for quick supplies to get started more efficiently I paid an old friend a visit, Stormy and can understand why people would want to go this route. The tinkering is fun, but the key element is cost effectiveness and a back up plan. I have been waiting on good ol Caesar to write me back for technical support so I can get them functioning...odd problems, but he seems to be MIA for the past week. The plan is to quickly master them, then create a few tutorial videos. I like to fully understand products before unleashing them out in the world.Does Stewie still have that time machine handy?
Jesus! Nice business plan! Thank you J5! It's great to know that your lungs are spotless! It's a shame how one puts so much devotion to a corrupt system.
Hey TJ! They have been coming as a constant from every where for months. Many vaping shops wants to grab our stuff. This is an amazing opportunity. The problem is, is that we can't afford to supply these masses.
Yes sir! 8.50 all the way, The Platinum and 801 Fusion lines never faced this issue. Only the 510 Fusion line did.
No your eyes are not deceiving you. They're coming. they sent half the order and decided to tell me that they had to produce more coils after I inquired. They'll be here quickly.
WHOA! Isaac's getting into RBAs? YES!!!! That's where I've been guys! And loving it! First couple of builds were "meh", better... but not great as I've heard. This last build I did last night is WOW!!!
Isaac, I can't see the pic from here, but are you looking at designing your own? Or just tinkering with the concept for now? Oxidizing is the easy part man. Just burn the chit out of it. Then burn with juice. Then pulse. The coil is what I've had some grief with. But, you're a master coiler!
Anyway, just thought I'd throw in my 2 cents. I wasn't really interested as I'm fat and happy with my fusions and lavatanks. But, once I read about the ease of the RSST I gave it a shot. If you're designing, keep in mind the features that are making folks jump all over those. The insulated wick hole, easy (spring/washer) attachment of the pos wire. I don't know that the insulated tank is that important. But, it' nice. I'm sure you knew all this. But, dayum, this is cool making my own stuff!
I'm feeling pretty good about RBAs. And it's my main vape now (mainly to thoroughly test), but I always have a fusion on my second mod I always carry and another fusion in my pocket!
Keep us posted!
Isaac, I can't see the pic from here, but are you looking at designing your own? Or just tinkering with the concept for now? Oxidizing is the easy part man. Just burn the chit out of it.
Then burn with juice. Then pulse. The coil is what I've had some grief with. But, you're a master coiler!Anyway, just thought I'd throw in my 2 cents. I wasn't really interested as I'm fat and happy with my fusions and lavatanks. But, once I read about the ease of the RSST I gave it a shot. If you're designing, keep in mind the features that are making folks jump all over those. The insulated wick hole, easy (spring/washer) attachment of the pos wire. I don't know that the insulated tank is that important. But, it' nice. I'm sure you knew all this. But, dayum, this is cool making my own stuff!
I'm feeling pretty good about RBAs. And it's my main vape now (mainly to thoroughly test), but I always have a fusion on my second mod I always carry and another fusion in my pocket!
Keep us posted!
Hi. I bought an auto ego and an evod and it was heaven for one day. The draw was tight but the flavor was amazing. Next day burned juice and extremely tight draw. Am I doing something wrong? Help
The RSST is nice but it doesn't play well with my Juice....... One word Isaac ~ Glass !!! When the time comes, let me know, I can source the glass
I think he said the draw was tight on the auto ego. The longevity of any carto/atty has to do with the kind of juice you're using. The ones with too much sugar get gunked up quick.
The draw on the evod was tight from the beginning. I could only get maybe a 3 or 4 second hit before the battery wouldn't fire. I put a regular carto on the battery and the battery fired without stopping. I rinsed the evod out, filled it with different juice, put it on a manual ego and the draw was tight and burned tasting but it continued to draw until I released the button. The question that I am asking is about the evod. what should I do with it to fix it?
Good point Wharf. Need both options Isaac. I don't have to worry about it with my juice. But, I tend to break things...
- Status
Similar threads
- Locked
