I'm all kayfunned out... Where do I go from here...
- Thread starter flexsr
- Start date
- th_trl_thread_readers 0
- Status
Bottom feeder with a rebuildable is definitely the dopest setup, reo couldn't handle low ohm builds that I wanted so I built my own.
That being said you can get a reo now that can handle fairly low builds and you should be happy, BF is the best for sure.
But for 30 bucks you can get the Fv4 that is the sweetest rebuildable tank atty I've used.
That being said you can get a reo now that can handle fairly low builds and you should be happy, BF is the best for sure.
But for 30 bucks you can get the Fv4 that is the sweetest rebuildable tank atty I've used.
Gotta say, I love my Aqua. Thinking of getting a Fogger V4 soon just because of all the good things I've heard about it... But it's gonna be a while til I can afford to spend more on vape gear 
Plus I have some stuff on the way from fasttech (Well... Not really on the way... Ordered over a week ago and still hasn't shipped out -_-) But if the Aqua/Fogger aren't your style, pick up an AGA-T2 and use this build. Best vape I've gotten from a tank, only down side is unless I feel like carrying the fill plug with me (I'll be honest... I lost it long long ago) it's an at-home vape only. Having juice leak when you're on-the-go sucks >.<
Plus I have some stuff on the way from fasttech (Well... Not really on the way... Ordered over a week ago and still hasn't shipped out -_-) But if the Aqua/Fogger aren't your style, pick up an AGA-T2 and use this build. Best vape I've gotten from a tank, only down side is unless I feel like carrying the fill plug with me (I'll be honest... I lost it long long ago) it's an at-home vape only. Having juice leak when you're on-the-go sucks >.<
Get the Fv4 from vapor beast. Com, they still have the best version, with the copper pin and small deck, dunno how long that will last for tho...
Sent from my Transformer TF101 using Tapatalk
Sent from my Transformer TF101 using Tapatalk
OP - I'm n the same boat. Love my kayfuns but wanting something different. I've been looking at a taifun GT, fogger V4, and flash e-vapor. gonna pull the trigger eventually.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
The aqua and squape are def fun to play with. I use my aqua a lot. Just get the clear tank. It doesn't hold much so you need to know when your running low. And the squape is huge. I heard they are releasing a squape 2 this summer so I'd wait for that.
I love my Pyrex RSST. Gives me different vape than my Kayfun. Once you get over the first couple builds, it's really not hard to build. I build mine's with stainless steel mesh. It'll also give you the option to vape whatever juice you like, with no worries of cracking the tank.
I am interested in the aqua, but IMO, it'll give you a similar vape to a Kayfun (bottom fed). It does give you the option of dual coil and lower resistance. But if you haven't tried a genny, that would be the next step.
I am interested in the aqua, but IMO, it'll give you a similar vape to a Kayfun (bottom fed). It does give you the option of dual coil and lower resistance. But if you haven't tried a genny, that would be the next step.
Fwiw I'm sooo bummed with the fogger v4. I'll bet I've tried 100 coils in that thing and I just can't approach the thick dense kayfun vape with dual nano's. Maybe one day I'll nail a game changer coil, I'm not given up but I'm loosing hope.
I thought all the reviews I watched said it gets more clouds then kfl+?
Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2
Try the omega drip out it's that I use, with a dual nano coil setup and the massive stock airholes I get pretty decent clouds out of it
Sent from my SCH-I535 using Tapatalk
Sent from my SCH-I535 using Tapatalk
Thank you all so very much for such great input !
Looks like an aqua n fogger v4 in the lead if you cld call it that - awesome other suggestions as well !!!!! -
Definitely looking for something that can get a warm vape with the more horsepower devices coming out/been out - a kayfun 3.1 above 12 watts no good for me
As for the reo and rm2 suggestions - thx for input - anyone here looking for the best vape hands and can afford one get one and or put it on your Christmas or birthday list - I've been using reo for 4 years but what took it to the next level was the compatible rba - the only thing that sucks is they are all mech - well it doesn't suck - mechs rock- it's just I have 2 of them and want a regulated one . It will always be my number one but don't want to stay too close minded - that's why I have been tip toeing in non reo land -
That .65 ohm build sounds neat!!! - , I want a build and a rta that can taste good at what these new devices can put out ya know
There are tons more I want to individually thank but I typing on my phone n tapatalk is kicking my ... with scrolling back to re read the posts author -
My gratitude to all so much!!!!
Looks like an aqua n fogger v4 in the lead if you cld call it that - awesome other suggestions as well !!!!! -
Definitely looking for something that can get a warm vape with the more horsepower devices coming out/been out - a kayfun 3.1 above 12 watts no good for me
As for the reo and rm2 suggestions - thx for input - anyone here looking for the best vape hands and can afford one get one and or put it on your Christmas or birthday list - I've been using reo for 4 years but what took it to the next level was the compatible rba - the only thing that sucks is they are all mech - well it doesn't suck - mechs rock- it's just I have 2 of them and want a regulated one
. It will always be my number one but don't want to stay too close minded - that's why I have been tip toeing in non reo land -That .65 ohm build sounds neat!!! - , I want a build and a rta that can taste good at what these new devices can put out ya know
There are tons more I want to individually thank but I typing on my phone n tapatalk is kicking my ... with scrolling back to re read the posts author -
My gratitude to all so much!!!!
It's not a reo, and a reomizer is a rebuildable atomizer for the reo.
That my friend is my custom made bottom feeder.
Post pics and read the fogger v4! Thread ... I will help you out with it.... You will be happy.
Sent from my Transformer TF101 using Tapatalk
Well I am impressed. I love box mods and it's beautiful. Did you make it yourself? I have a few things I have been wanting in a box mod that have yet to be done and I don't have the skill to do it myself or I would. If you know of anyone that builds custom box mods that would be interested in building one for $ or trades I'd be stoked.
Thanks for the kind words I made it Yeah, I hear ya, that's why I made this, couldn't get a bottom feeder that would sub ohm, well, really sub ohm, I run this @ 0.30ohm all day, lower if I want. Here's the process n some pics;
http://www.e-cigarette-forum.com/forum/showthread.php?t=523555
Billit Aluminum Sub Ohm Bottom Feeder Beast!
Sent from my Transformer TF101 using Tapatalk
http://www.e-cigarette-forum.com/forum/showthread.php?t=523555
Billit Aluminum Sub Ohm Bottom Feeder Beast!
Sent from my Transformer TF101 using Tapatalk
- Status
Similar threads
