I've been vaping a year, using the 510 with the 1100 mah battery and all has been fine. Sometimes I drip, sometimes use the PTB and most recently the buff puff mod. Problem suddenly is a very dry burn no matter how much juice is on it. I blow the thing out, wipe it out, and this is with a brand new atty, fill my buff puff up and it works for a little bit then no vapor, flooded. so I blow it out again try again, same thing. So I figure I'll just drip. Same thing. Very harsh burn so I keep adding juice drop by drop, still dry burn then no vapor! This can't be a coincidence and I don't know what the heck I'm doing wrong all of a sudden. I used to have an atty last months, now I'm lucky if I get a day out of it. Driving me nuts. Help? Ideas?
- Status
I had a brand new atty once, that was VERY harsh. I got vapor but no flavor and lots of painful throat sensations. I put it on an ohm meter and it was reading 8+ ohms (supposed to be around 2.8). I sent it back and got a replacement. Have you tried a known "good" atty?
All my atty's are doing this, old, new, pretty new, you name it. I have one that's kind of working now but I can feel it's starting to flood again. It's like it's sucking the juice down like a vacuum. I dont know what the ohm is, I get them all from Cignot, always have. I got a 2. 5 from Madvapes that gave a hell of a hit but then went dry dry dry. Threw it out. Won't buy from them again, no warranty.
Sounds awful, I wish I had something else I could offer. (btw, you can get a cheap multimeter for around 5 or 10 bucks).
Only thing I can think to try is a thorough cleaning of everything, battery contact and atty contact, then try it again direct dripping. It almost sounds like the battery is feeding too much voltage, is it doing it on all your batteries as well?
Only thing I can think to try is a thorough cleaning of everything, battery contact and atty contact, then try it again direct dripping. It almost sounds like the battery is feeding too much voltage, is it doing it on all your batteries as well?
It almost sounds like your attys are getting too hot and the liquid is going down to the bottom and flooding rather than wicking properly....
(Is this a new battery ? The same battery used with all the attys ? Can you meter the battery ?)
(As above by ancient puffer...too much voltage from your battery...?)
(Is this a new battery ? The same battery used with all the attys ? Can you meter the battery ?)
(As above by ancient puffer...too much voltage from your battery...?)
- Status
Similar threads
