I'm Wasting lots of juice from overfilling.. Looking for ideas

[VaporWebHQ]

Well I use a older molder Buzz and vape at around 5v. I really Like my hits to be nice and Wet so I have a tendency to waste a crap ton of juice each month from it leaking out the air holes on the atty and sitting in the overflow catcher type area. I end up having to soak up the juice all the time or it runs down the side of my buzz. I go through alot of juice this way. I just hate dry hits I have to have my atty to the point of practically being flooded for the hit to be how I like it lol.

I tried cartos and I don't like them the hits are dry.

I tried the Viva tank but the hits are dry as hell I can't stand it, it will just sit in my box of vaping stuff forever.

Is there any tank systems or some other alternative out there that I could use to get the hits that I crave without wasting so much juice out the air holes on my attys?

Any info is appreciated.

Thanks!

 

[PhreakySTS9]

You need to try a drip shield. You need a 510 to 510 adapter. It will keep the extra juice you drip from running down your device and it will suck it back into the atty. Empire's site is down but Avid Vaper sells some drip shields as well.

Twisted Acrylic Grooved Drip Shield - Avid Vaper

And the adapter

510 to 510 adapter | extender

 

[PhreakySTS9]

I would actually look at the metal ones they sell on Avid Vaper first, they have good reviews and holes to help with airflow.

Drip Shield 901 | 510 | 306 - Avid Vaper

 

[VaporWebHQ]

I would actually look at the metal ones they sell on Avid Vaper first, they have good reviews and holes to help with airflow.

Drip Shield 901 | 510 | 306 - Avid Vaper

Ahhh So its kind of a "sheath" with an o-ring at the bottom that keeps the juice from dripping past it so it stays inside and can be sucked back into the atomizers air holes. And it has air holes at the top on the drip shield.. Very cool.

I use these atty's (i06): https://www.ikenvape.com/ProductDetails.asp?ProductCode=io635 (Not to advertise or anything lol but these atty's are amazing I love Ikenvapes stuff only person I buy attys and Ry4 from)
They seem to be the same size as a regular 306 so it looks like I would need:

Drip Shield 901 | 510 | 306 - Avid Vaper
And
510 to 510 adapter | extender
And
XL306 Contoured LR306 Delrin® Drip Tip - Avid Vaper


I hope this set up would work out it says it it should but The i06/306 is a wierd size atty lol..


Thank you very much for showing me this I'm goign to look it over some more see if anyone has anything else to add then snag the stuff up

 

[muzichead]

Actually the IO6 atty is a larger diameter than a standard 306 atty.... You still might be able to use the drip shield with the standard IO6 stuff though. Iken has a sub forum here on ECF... You might inquire over there for the correct answer... The thing I know of for use with an IO6 is a DCA from GoodSense Vapor. They are really hard to get ahold of but I think people have seen them in the classifieds...

GoodSense Vapor - i06DCA

 

[junkman]

Well I use a older molder Buzz and vape at around 5v. I really Like my hits to be nice and Wet so I have a tendency to waste a crap ton of juice each month from it leaking out the air holes on the atty and sitting in the overflow catcher type area. I end up having to soak up the juice all the time or it runs down the side of my buzz. I go through alot of juice this way. I just hate dry hits I have to have my atty to the point of practically being flooded for the hit to be how I like it lol.

I tried cartos and I don't like them the hits are dry.

I tried the Viva tank but the hits are dry as hell I can't stand it, it will just sit in my box of vaping stuff forever.

Is there any tank systems or some other alternative out there that I could use to get the hits that I crave without wasting so much juice out the air holes on my attys?

Any info is appreciated.

Thanks!

I have found DID type (DUD/Chid) to be very flavorful and once you get it set up, easy to use. You can hold a few ml in the tanks and it may be your answer. They are certainly very economical compared to buying $8+ attys on a regular basis.

You still want a dripper to audition juices though.

 

[VaporWebHQ]

Actually the IO6 atty is a larger diameter than a standard 306 atty.... You still might be able to use the drip shield with the standard IO6 stuff though. Iken has a sub forum here on ECF... You might inquire over there for the correct answer... The thing I know of for use with an IO6 is a DCA from GoodSense Vapor. They are really hard to get ahold of but I think people have seen them in the classifieds...

GoodSense Vapor - i06DCA

Thank you! I seen they had just got a few in stock yesturday and had already sold out of the polished but the black was still available so I snatched it up.

I have to say tho I really hope this thing works as it was Crazy expensive for how big and what it is.. cost me $32 for it which is very expensive BUT if it works it should pay for itself in saving me wasted juice. I literally usually waste 1/2 my juice from having to soak it up with a papertowel before it runs down the side of my Buzz.

Thank you all for the replies and help Now I'm more broke then I was before but also excited at the same time lol.. Not I since i'm down to 10MlL of juice left I gota find some money to order that