Infinite Stingray

[jblindy]

I just ordered me a black Infinite Stingray. I can't wait for it to get here and vape some Nicoticket juice on a sub-ohm coil. Does anybody have one of these? How is it?

Maybe one of these days, I'll venture into dripping, but it just seems to much of a hastle to me. Drip, puff, puff, puff, drip, puff, puff, puff..............

 

[glowplug]

I have an hcigar black Ray. It is still in the box looking sooooo pretty. I think you will love it. I have heard nothing but good things and the all copper design is supposed to make it a heavy hitter with little voltage drop.

I am delaying my playtime with it until I can do it with DH gone. I don't want him to see it until it is just sitting with all my other stuffs. He will hit the roof. I was just given a Reo and a purple Vamo v2 as gifts and I bought myself another mech. Bad me. Baaaaaaad girl. But, damn, it is beautiful, well made and really reasonable at $43. I am just preparing for the vapocalypse, doncha know.

 

[gopher_byrd]

I just got a clone black and copper Stingray. He sure is a mighty device.

Once you try dripping with sub-ohms you will become "Infected". I haven't gone nuts with super sub-ohm, I've been building mine to come in @ 0.6 ohms with dual coils. Man the flavors come to life and of course the clouds...

The Origen has really deep wells so you don't have to drip as often, but you should get something easier to start with. He is a little bit harder to build as it uses vertical coils that you have to trap under the screws, but once you figure it out vape heaven...

 

[taki1203]

I just ordered me a black Infinite Stingray. I can't wait for it to get here and vape some Nicoticket juice on a sub-ohm coil. Does anybody have one of these? How is it?

Maybe one of these days, I'll venture into dripping, but it just seems to much of a hastle to me. Drip, puff, puff, puff, drip, puff, puff, puff..............

I have an authentic PB Ray and an LE Ray coming tomorrow. One of the best button assembly set ups I have seen. You will not be disappointed. There are plenty of new attys coming out that help limit the dripping (Origen, Magma and Veritas come to mind) and clones should be coming along soon.

 

[taki1203]

I just got a clone black and copper Stingray. He sure is a mighty device.

Once you try dripping with sub-ohms you will become "Infected". I haven't gone nuts with super sub-ohm, I've been building mine to come in @ 0.6 ohms with dual coils. Man the flavors come to life and of course the clouds...

The Origen has really deep wells so you don't have to drip as often, but you should get something easier to start with. He is a little bit harder to build as it uses vertical coils that you have to trap under the screws, but once you figure it out vape heaven...

Reo...... it's like dripping without the hassle... just sayin.

 

[Timbuck55]

I just ordered me a black Infinite Stingray. I can't wait for it to get here and vape some Nicoticket juice on a sub-ohm coil. Does anybody have one of these? How is it?

Maybe one of these days, I'll venture into dripping, but it just seems to much of a hastle to me. Drip, puff, puff, puff, drip, puff, puff, puff..............

Where did you get the infinite clone from?

 

[jblindy]

From CodeVape on ebay. He also has a preorder going on for the red copper Stingray. It looks gorgeous but I had to have it now, so I ordered the black one.

 

[Bengal Ben]

From CodeVape on ebay. He also has a preorder going on for the red copper Stingray. It looks gorgeous but I had to have it now, so I ordered the black one.

I own an Infinite Stingray clone and it was a great choice on your part. If you plan on using any Atomizers, particularly the Kayfun Lite + with a airflow regulator screw on the bottom you should take this advice. Constantly check this screw. They tend to back themselves out from time to time and this could lead to your Atty becoming stuck on the Stingray Mod. This has to do with the way the airflow channels are built on the Mods top cap.

With that said, I use my Stingray daily with my KFL+ topped off with CLS and now Frenilla (it finally popped!).

Enjoy!

Oh and can payday come soon enough? I'm placing a monster order with Nicoticket on friday!

 

[brickfollett]

I like my Infinite Stingray alot. My button was particularly crunchy and I wound up sanding the interiors of the button assembly with 2000 grit sandpaper and steel wool. Smoothed out quite a bit, but by no means buttery. I haven't been using it much lately since getting my Reo, but I really want to get a nice RBA in addition to my Trident V2 clone. I have two tridents, one for the Stingray and one for the Reo. I sent the second trident off to a guy to modify it into a bottom feeder. Vaping in Reo heaven for sure.

My buddy has an RBA called the castle which is just incredible. Dual coil only design, but it has options for massive airflow, or a tighter draw and everywhere in between. I did a .67 ohm coil for him and slapped in on my Stingray and it was pretty nuts. Easy to build on too

 

[Kent Brooks]

I own an Infinite Stingray clone and it was a great choice on your part. If you plan on using any Atomizers, particularly the Kayfun Lite + with a airflow regulator screw on the bottom you should take this advice. Constantly check this screw. They tend to back themselves out from time to time and this could lead to your Atty becoming stuck on the Stingray Mod. This has to do with the way the airflow channels are built on the Mods top cap.

With that said, I use my Stingray daily with my KFL+ topped off with CLS and now Frenilla (it finally popped!).

Enjoy!

Oh and can payday come soon enough? I'm placing a monster order with Nicoticket on friday!

Thank you in advance for the order Ben!

Question: Infinite seems to be making a move for the "We make quality clones" crown. Seems like they have gone from zero to hero in like... 2 weeks. What gives?

 

[brickfollett]

Thank you in advance for the order Ben!

Question: Infinite seems to be making a move for the "We make quality clones" crown. Seems like they have gone from zero to hero in like... 2 weeks. What gives?

Well generally the testimony from members on the forum is really what matters. I hear from people that they make the closest 1:1 clones out there, so good for them. Authentics are so outrageously expensive BECAUSE they are hard to come by. That's just simple economics. High demand + low supply = high price. Clones fix that for us, albeit at a slightly lower quality for the most part

 

[jblindy]

I own an Infinite Stingray clone and it was a great choice on your part. If you plan on using any Atomizers, particularly the Kayfun Lite + with a airflow regulator screw on the bottom you should take this advice. Constantly check this screw. They tend to back themselves out from time to time and this could lead to your Atty becoming stuck on the Stingray Mod. This has to do with the way the airflow channels are built on the Mods top cap.

With that said, I use my Stingray daily with my KFL+ topped off with CLS and now Frenilla (it finally popped!).

Enjoy!

Oh and can payday come soon enough? I'm placing a monster order with Nicoticket on friday!

Thanks for that bit of advice. I'll make sure to keep an eye on it.

 

[PoofImGone]

I ordered an all copper Infinite cone from White Stag Vapor at the end of April on a pre-order and its set to ship to me 5/21. I also ordered the copper Infinite TOBH to go with it. I have been drooling with anticipation on this order. Cant' wait anymore.

 

[jblindy]

I'm not sure if I'll order the red copper when it is released. I'll wait on the reviews, which I'm sure will be good, I just hate being a guinea pig. Besides, how many mods does one need?

 

[PoofImGone]

I'm not sure if I'll order the red copper when it is released. I'll wait on the reviews, which I'm sure will be good, I just hate being a guinea pig. Besides, how many mods does one need?

I'll post some pics and thoughts once I get mine.

 

[jblindy]

I got mine in the mail today and I must say, very nice! I'm gonna mess with it for a day or two, put a sub-ohm coil on it, and post my thoughts, which, I promise, won't be very in depth.

 

[penguiness]

I got mine in the mail today and I must say, very nice! I'm gonna mess with it for a day or two, put a sub-ohm coil on it, and post my thoughts, which, I promise, won't be very in depth.

Anxiously awaiting your feedback on this!

 

[brickfollett]

I'm not sure if I'll order the red copper when it is released. I'll wait on the reviews, which I'm sure will be good, I just hate being a guinea pig. Besides, how many mods does one need?

There's no limit!

 

[catmomma]

The TOBH atty has huge holes in the posts so you can easily build on it even with 22-26 Gauge Kanthal or twisted coil. Really good airflow control too. Clones are out now and its amazing to vape with.

 

[jblindy]

Well, here are my thoughts on the Infinite Black/Copper Stingray Clone. Mind you, I don't have much experience with mechanicals. The only other one I have is a Kamry K101, which is not all that great. I have two Sigelei's, a Zmax V3 & V5.

That said, this mod is gorgeous. It's all copper with silver plated contacts and a slightly rubberized coating. The engraving is nice and deep. The black coating looks durable and provides a slip free surface to hold. The threads are buttery smooth. The locking ring is so smooth that it can be operated with a few flicks of the pinky finger. The magnetic switch is strong enough to support the weight of a Kayfun 3.1 when unlocked. The only problem is the switch is a bit sticky unless you press right in the center. It doesn't stick in the firing position, just on the press. The throw is only a few millimeters. I took it apart and there are a few burrs which could be contributing to the stickiness. Also, when the switch is unlocked and the mod is standing, it does lean ever so slightly. It's very short in comparison to my Sigelei, by a few inches. How does it hit? Hot and hard. My first few goes with a .5 ohm micro coil and a fresh VTC5 had me feeling a bit lightheaded at 12mg. The vapor is almost too hot with a .5 ohm coil, I'm going to up the resistance on my next build. I like a warm vapor but not hot, and this is hot.

Now just a few pics.