Infinity Pro , M1A1 Locking tank , Buzz Pro , VVPro coming soon , reduced prices because Grimm Green called

[BuzzKill]

Thats right the IPro is in full production now , 15 watts of power ( most of the VV types ) , 3.3-5.5 volt range , 3 amps , 4 colors , 901-510-808-801 connections Small sleek design , interchangeable top caps
Specs:

1. 15 watts maximum power output
2. Wheel adjustable voltage dial
3. Improved battery life 2 x 's avg. ,
4. New finish , blasted finish with no knurling , it will improve the slip factor !
5. Uses same batteries as the original Infinity 14430
6. 3-3 to 5.5 volt adjustment
7. New top cap design for a sleeker look.
8. Over current Protection
9. Over temp. protection
10. Reverse Battery protection
11. Size 4.75" long x .5 " around

,



M1A1 tanks
The M1A1 tank from Notcigs is made from an UNCRACKABLE tube material that only Notcigs has , it has a locking side screw for positive holding to the cartomizer , it has Aluminum ANODIZED ( impervious to corrosion ) top and bottom caps , both internal and external orings on BOTH the bottom and top caps .
If you can break it we will replace the tube section no charge !
We also have a spares / rebuild kit that includes 1. screw 1. internal o-ring 1. external o-ring and a Syringe for refilling the M1A1 tank for $5.95

Extra tanks will be available also

Based on the Vermonster / CHaos / yzrmbsg design from VF




Buzz Pro :
Same electrical spec's as the IPro in a different package

ALSO the VVProV coming by Xmas this year.
Specs:

15 watts maximum power output
Wheel adjustable voltage dial
Improved battery life 2 x 's avg. , we have a new controller that is MUCH more efficeint. avg. 15 hrs per charge
New finish , blasted finish
3-3 to 5.5 volt adjustment
6 ml juice capacity
2 x 14500 batteries
built in charger
Aluminum case
Anodized Black OR
Chrome plated tops and case
Passthru capable

 

[BuzzKill]

Bumpomatic

 

[stv888]

nice set ups!
does the VVPV top feeder will remain as pictured?
or will it be some other set up for the top feeder.
how do you activate the juice to feed?
thanks

 

[Ruppy]

nice set ups!
does the VVPV top feeder will remain as pictured?
or will it be some other set up for the top feeder.
how do you activate the juice to feed?
thanks

Pretty sure the pics of the VVPV are the final version.

The feed is a mechanical button on the top opposite the fire button. Pushing down on it feeds the juice. Each push gives approx 2 drops depending on the juice you use.

If you look on mikes site at :the dripper: youll get a idea of how it kinda works.

I beta tested the original proto before mike did the final device revisions on it and it worked very well.

 

[stv888]

cool.
my only concern is that tube going up to the atomizer,, looks a bit,,,,messy,,?
would be nice with a straight metal tube going up to it
but dont get me wrong i am still getting one!

 

[ukeman]

cool.
my only concern is that tube going up to the atomizer,, looks a bit,,,,messy,,?
would be nice with a straight metal tube going up to it
but dont get me wrong i am still getting one!

The tube is wrapped around to allow for different atty's. some will be shorter or taller... also depends on which connector / adapter you use.
Being that the one pictured is a 901 connector, I'm so down with it.
I'm sure you can drill your own d/t for the tube, but actually with that 901 d/t it's sporting, i had zero complaints.
Double 14500's last a long long time.
3 inches tall, 2+ inches wide, less than an inch thick, it fits right in the palm of your hand. The proto is bullet proof... 2mm thick
Double 14500's last a long long time... fires flawless every time.
2 or 3 drops right on top of the wick/coil... bam.
I'm a dripper... and this baby gives you the best possible vape with no sweat. One hand operation all the way, and a real off/on switch too.
The top feed works. It's what I've been looking for a long time.

 

[bmwjen]

Christmas will be Merry when I get a VVPV from NotCigs just sayin'