I've used clear Fluxo's for awhile (6+ months) and the newest versions are by far the best. Better tube design (no cracking), sealed connector (no leaks), improved coils (more consistent wrapping), taller connector base (no wiggling, better seal). Nice clean flavor that's as close to dripping as you can get. I got tired of tasting filler when I vaped and these eliminate that. Gotvapes is the only vendor out there working to improve CE2's and fillerless carto's so there's always going to be 'works in progress'. They're like IKV of fillerless carto's.
Infinity Pro release...
- Thread starter ipetbumblebees
- Start date
- th_trl_thread_readers 0
- Status
There is a small screw and o-ring in the bag with my I-pro, what are they for?
It probably came out of the connector on top. The screws come out during shipping sometimes. I have no idea what the o-ring is for. To be sure PM or email Mike. Congrats on getting it Ipet.
There is no link until his new site and server comes on line.
You can see from the other posts that some people like their stuff. I just got tired of guinea pigging their products on my dime. But like I said before Everyone has their own likes and dislikes. One mans trash is another mans treasure so don't let my dislike of their products sway you one way or the other.
There is no link until his new site and server comes on line.
You can see from the other posts that some people like their stuff. I just got tired of guinea pigging their products on my dime. But like I said before Everyone has their own likes and dislikes. One mans trash is another mans treasure so don't let my dislike of their products sway you one way or the other.
Last edited:
The o-ring and screw go in the top cap to seal it. The o-ring goes in first then the screw. Tighten the screw down but don't over tighten. Just snug it down.
Look for a small washer in the bag also. (If the IP cap is the same as the BP cap).
ok maybe a dumb question, and not sure which thread this should be in,
when selecting options for an infinity pro there's the option to upload a .bmp image, i take it this is for a personal engraved image? y/n
and if yes is it free?
reason i ask is i'd like a custom image, but not interested in any engraved lettering. so i upload an image and select none for text. and it doesn't add any charge for the image, is that right?
when selecting options for an infinity pro there's the option to upload a .bmp image, i take it this is for a personal engraved image? y/n
and if yes is it free?
reason i ask is i'd like a custom image, but not interested in any engraved lettering. so i upload an image and select none for text. and it doesn't add any charge for the image, is that right?
I believe there is like a $40 charge for the engraving.
Laser Engraving ( read below !!! ) - notcigs.com
Oh, absolutely not a dumb question.
Laser Engraving ( read below !!! ) - notcigs.com
Oh, absolutely not a dumb question.
yeah its +$30 when bought together with the Ipro, but that appears for lettering, the part for the image is not part of the same option, and when you upload and check out it stays standard price hence why i'm a little confused
ok maybe a dumb question, and not sure which thread this should be in,
when selecting options for an infinity pro there's the option to upload a .bmp image, i take it this is for a personal engraved image? y/n
and if yes is it free?
reason i ask is i'd like a custom image, but not interested in any engraved lettering. so i upload an image and select none for text. and it doesn't add any charge for the image, is that right?
No my site is not right ! I will fix it today if I can !
there is a bad link in the product page or something .
OK I fixed it now , you can select ( Image only . Image + text )
Got my ipro today (Thank You) im pretty happy with it although like i said before im a noob so im having some issues. Right now all ive got are the xl dual coil lr cartos (1.6 ohm) and i cant turn it above green (3.5v) on the dial or it gets too hot and harsh.
Would anyone be so kind as to recommend a carto for the ipro that i can crank the voltage up on and get better vapor production ? remember im a noob so nothing to finicky... tia
Btw im using high caliber 50/50 18mg fluid from altsmoke if that makes a difference.
Would anyone be so kind as to recommend a carto for the ipro that i can crank the voltage up on and get better vapor production ? remember im a noob so nothing to finicky... tia
Btw im using high caliber 50/50 18mg fluid from altsmoke if that makes a difference.
Last edited:
A standard 2.5 - 3 ohm boge is a good bet.
I have 808 connector, do well with v4l coolcarts, a bit over 3 ohms.
When ikenvape reopens, you might try his 801 fusion carto, with a little adapter (i use his gold 901/808 to 801 adapter).
I have 808 connector, do well with v4l coolcarts, a bit over 3 ohms.
When ikenvape reopens, you might try his 801 fusion carto, with a little adapter (i use his gold 901/808 to 801 adapter).
Do you have a multi meter? If you do, check the Ω. Also try another carto.
I use 1.8Ω attys and just got 1.5Ω and I go up to 4.2v and it's a nice vape.
That being said, the 2.5Ω range will give you more flexibility.
I use 1.8Ω attys and just got 1.5Ω and I go up to 4.2v and it's a nice vape.
That being said, the 2.5Ω range will give you more flexibility.
Last edited:
Tried a couple different 1.6Ω dual cartos and different juices and same result, im hacking like i just took a massive .... hit lol If i turn it down to 3.5v or less i get a decent hit and dont cough a lung up. Perhaps my lungs just aint used to it ? either way i just ordered some boge 3.0Ω cartos from smoktek, ill give em a shot. Thanks guys !
Last edited:
- Status
