Insomniacs

[Skunk!]

 

[Necrospecter]

 

[jim_87]

TFW you find fries at the bottom of your take out bag that you didn't know were there.

 

[Necrospecter]

TFW you find fries at the bottom of your take out bag that you didn't know were there.

bag fries are okay but if one is curly then that is the win or even better when you get the onion ring

 

[Letitia]

@Skunk! Have you tried Gryphon Ni80?

 

[Skunk!]

@Skunk! Have you tried Gryphon Ni80?

No I haven't. Should I? Where do.you find it? I looked and didn't see anything.

 

[Letitia]

No I haven't. Should I? Where do.you find it? I looked and didn't see anything.

No I haven't tried it but had heard of it. Got an email from Camelot that they were now carrying Gryphon ss and Ni80 and will soon have Ni90 available. So Raymo and some others are all hyped up about using the Ni90...why? Resistance maybe.

 

[Skunk!]

No I haven't tried it but had heard of it. Got an email from Camelot that they were now carrying Gryphon ss and Ni80 and will soon have Ni90 available. So Raymo and some others are all hyped up about using the Ni90...why? Resistance maybe.

Do they just sell coils or do they do spools of wire? I am interested to se what's up with the Ni90. Camelot is a wholesaler. Do they have a minimum order?

 

[Letitia]

Do they just sell coils or do they do spools of wire? I am interested to se what's up with the Ni90. Camelot is a wholesaler. Do they have a minimum order?

No minimum order, maybe a different Camelot. They sell both coils and spools. Here's the link so you can sign up for the newsletter. I used to get juice from them and the build mats are great.
Wire, Coils, & Cotton - Camelot E-Liquid

 

[Skunk!]

No minimum order, maybe a different Camelot. They sell both coils and spools. Here's the link so you can sign up for the newsletter. I used to get juice from them and the build mats are great.
Wire, Coils, & Cotton - Camelot E-Liquid

Awesome thanks!

 

[jim_87]

Guys, any suggestions for a DR replacement? Mine seeps and leaks on all my mods/ squonks. I checked the squonk pin, it is tight, not cross threaded, or overtightened. I'm not over squonking either. The o-rings are also good. This is kind of a mystery...

 

[Hightech Redneck]

Guys, any suggestions for a DR replacement? Mine seeps and leaks on all my mods/ squonks. I checked the squonk pin, it is tight, not cross threaded, or overtightened. I'm not over squonking either. The o-rings are also good. This is kind of a mystery...

Drop dead for dual, drop solo for single.......

 

[Necrospecter]

Guys, any suggestions for a DR replacement? Mine seeps and leaks on all my mods/ squonks. I checked the squonk pin, it is tight, not cross threaded, or overtightened. I'm not over squonking either. The o-rings are also good. This is kind of a mystery...

you sure it is leaking from the pin? could be the deck rings need to be replaced.

 

[Skunk!]

Guys, any suggestions for a DR replacement? Mine seeps and leaks on all my mods/ squonks. I checked the squonk pin, it is tight, not cross threaded, or overtightened. I'm not over squonking either. The o-rings are also good. This is kind of a mystery...

I agree with HR. Those would be the closest. Can't think of what would cause it. I have never had any issues with either the 24 or SQ.

 

[jim_87]

you sure it is leaking from the pin? could be the deck rings need to be replaced.

I agree with HR. Those would be the closest. Can't think of what would cause it. I have never had any issues with either the 24 or SQ.

The only other thing I can think of is the squonk pin isn't making contact with the pin on the squonk mod. There must be a minuscule gap between them. This has happened with all my squonks with this atty.

 

[jim_87]

Drop dead for dual, drop solo for single.......

Interesting...I was thinking about the drop, and also the recurve.

 

[Skunk!]

[JUSTIFY_TEXT]

The only other thing I can think of is the squonk pin isn't making contact with the pin on the squonk mod. There must be a minuscule gap between them. This has happened with all my squonks with this atty.

[/JUSTIFY_TEXT]
I would try one of the single coil options personally. I used dual coil for years. Tried single with DRSQ and since then everything I have bought has been single. It seems to perform better for me and battery life on a single battery squonker is good. I have heard only good things about the ones you mentioned. Sorry about your Rabbit. Mine has the solid pin back in it and a Challenge cap. I use it for low ohm dripping on dual battery devices. It is best for that. My mechanical mods don't like the massive coils I use in it lol. My Rabbit SQ is my go everywhere BF RDA. Can't oversquonk it and never leaks.

 

[jim_87]

[JUSTIFY_TEXT]


[/JUSTIFY_TEXT]
I would try one of the single coil options personally. I used dual coil for years. Tried single with DRSQ and since then everything I have bought has been single. It seems to perform better for me and battery life on a single battery squonker is good. I have heard only good things about the ones you mentioned. Sorry about your Rabbit. Mine has the solid pin back in it and a Challenge cap. I use it for low ohm dripping on dual battery devices. It is best for that. My mechanical mods don't like the massive coils I use in it lol. My Rabbit SQ is my go everywhere BF RDA. Can't oversquonk it and never leaks.

Venturing into single coil territory isn't a bad idea. I have my Oumier wasp nano on the way, I may look into a few more single coil rda's to swap out. I still also may pick up another Radar rda...can't believe how much flavor I get from that one.

 

[Skunk!]

Venturing into single coil territory isn't a bad idea. I have my Oumier wasp nano on the way, I may look into a few more single coil rda's to swap out. I still also may pick up another Radar rda...can't believe how much flavor I get from that one.

I am really happy with all my single coil attys. The flavor on the GR1 is amazing but it is quite easy to oversquonk. I love my Serpent RTA. It is my first rebuildable tank and I have been using it more than my squonkers lately. It is a single also. I have quad core SS fused clapton's in all my single coils. All are between .2 and .25. I get much better performance from them than any dual coil in that resistance range. Look for ones with reduced chambers of you want big flavor.

 

[Skunk!]

Venturing into single coil territory isn't a bad idea. I have my Oumier wasp nano on the way, I may look into a few more single coil rda's to swap out. I still also may pick up another Radar rda...can't believe how much flavor I get from that one.

Let me know how you like the wasp. I also really like the looks of the demon killer. It is so tiny.