Introducing Fantastic KayFun 3.1 RBA Kit by HeatVape

[dannoman]

HeatVape kayfun 3.1 4.5ml Stainless Steel
$39.95

Heatvape kayfun 3.1 rba Stainless Rebuildable Atomizer is truly a STELLAR Complete Rebuildable Kit that successfully executes its advertised outstanding flavor enhancement (watch our Max from about 25:00 mins into the video below to get is flabbergasted good reaction to the flavor).

The kit comes with an optional clear polypropylene tank, you can see how much is remaining. It uses a chamber to house your wick and coil, concentrating the vapor and producing a bold flavor.

We've never seen a kit include such an outstanding collection of spare parts including: screwdriver, tons of spare O-rings, silica and ekowool wick, fill bottle and more.

Do yourself a favor and READ through the thorough, good plain English manual. It shows you how to assemble, how to take advantage of all the features, proper filling and air adjustment and suggested builds

Dimensions: 86mm x 22mm
Capacity: 4.5ml
Dual coil or single coil
Stainless steel

What You Get:

• Kayfun 3.1 atomizer
• epalcement plastic tube
• Pack of wick
• Pack of rubber seal rings, post screws and a steel ring
• Screwdriver
• 10ml semi-transparent empty bottle with needle tip recommended to fill the unit

Filling:
Method 1 (classic):
- unscrew the cap.
- pour e-liquid into the space between the body and vaporizing chamber.
- screw the cap back on.
Method 2 (through the valve):
Filling through the valve, you will need a bottle with a think plastic nose. Nose diameter should be compatible to the filling port.
- turn the mouthpiece down
- insert the nose of the bottle in the valve opening.
- fill the tank by squeezing the bottle. The air will escape from the tank into evaporation chamber through the same grooves.
- take out the nose of the bottle from the valve, turn mouthpiece on.

Airflow adjustment - Air inlet can be adjusted through adjustment holes with special screwdriver.

---

Max Provides his Conclusions around the 25 minute Mark!




HeatVape Kayfun 3.1 4.5ml Stainless Steel [gv-HeatVapeKayFun3.1] - $39.95 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more​

 

[woody55]

Hi gang, When filling the Kayfun up use the included plastic tipped fill bottle. It works the best with no mess. Invert the unit and hold at a slight angle. When your juice level reaches the top of the clear window if you are using it you are full. The Kayfun operates on a vacuum type system so you have to leave a little bit of an air bubble in it for the vacuum to function properly. This has to be one of the best RBA's that I have ever used! I will do another short video on the proper filling procedures showing how to do both types.

 

[woody55]

Ok gang, I promised so here it is!

​

 

[yiddleboge6]

Nice !! TY Woody...

 

[dannoman]

Excellent demo on filling - I've added this to the product page. Main points is MAX points out t leave a bit of an air bubble or two for pressure/vacuuming and how to clear out the air channels if too much juice causes gurgling and bland wet vapes. Great video Max! Thanks...

 

[keelalagirl55]

Gonna say it again MINE!!!!!

 

[woody55]

You will like! It is a great RBA!

 

[yiddleboge6]

Really makes me wish my fingers worked well enough for making coils...