I am ordering the Clear Griffin tank tubes Now
It'll look something like this:
That's using one of the 12 mil syringes
.
Last edited:
Introducing the Griffin Rebuildable Atomizer Tank
- Thread starter gormly
- Start date
- th_trl_thread_readers 0
-
- Tags
- ecigexpress provari vamo vapor pro
- Status
It'll look something like this:
That's using one of the 12 mil syringes
.
yep but if I don't sell it all I'm screwed LOL
the tubes are really cheap though, so if you can wait, don't buy the syringe fix. (unless you want the ml markings)
it'll cost you more in postage than I will be charging.
the tubes are really cheap though, so if you can wait, don't buy the syringe fix. (unless you want the ml markings)
it'll cost you more in postage than I will be charging.
Oh they will sell don't you worry. I already plan to buy one of everything that you had mentioned to have as backups and extra
I will want a Griffin with the clear tube & some clear tubes for backup.
Crap. Now that I don't have to spend half the day making tubes, I have no excuse not to cut the grass.
This is kinda a test. I wanted to see how good the upload software is on this site. Plus they are pretty pics
The Griffin tank is 3.2ml btw.
I went and got a 10 ml ..mmm does not fit
((
Just so you all know...
I can't pay for this order until Tuesday
It exceeds my bank card limit so I need to do a TT wire and Banks are not open on Monday
So Pay Tuesday, they will prepare and ship probably Wednesday (hopefully), that means it's probably NOT going to be here until the following Monday
I can't pay for this order until Tuesday
It exceeds my bank card limit so I need to do a TT wire and Banks are not open on Monday
So Pay Tuesday, they will prepare and ship probably Wednesday (hopefully), that means it's probably NOT going to be here until the following Monday
Yea, if I had thought ahead I could have dumped some cash into my PayPal account...
I am paranoid about credit cards, so I use my bank accounts for everything and have set limits on what can come out so I don't get hacked someday and lose everything, it's a double edged sword.
Nowadays its best to be careful.Yea, if I had thought ahead I could have dumped some cash into my PayPal account...
I am paranoid about credit cards, so I use my bank accounts for everything and have set limits on what can come out so I don't get hacked someday and lose everything, it's a double edged sword.
I'll be in for a new top cap and clear tube and can wait after all im getting old and in no hurry !
Big D cutting grass grrrr but i vape when doing so sitting on garden tractor. lol
Hopefully these are either polypropylene or PMMA (fancy talk for acrylic).
Yea, if I had thought ahead I could have dumped some cash into my PayPal account...
I am paranoid about credit cards, so I use my bank accounts for everything and have set limits on what can come out so I don't get hacked someday and lose everything, it's a double edged sword.
Wise thinking .... I do it as well but after I got ripped a couple hundred euros
I got my Griffin on Monday, and it's a vaping machine! It was pretty easy to set-up, just watched a couple videos I found on youtube for wick/coil making and general genesis set-up that helped quite a bit.
Looking forward to the clear tanks...I hate not being able to see how much juice is left.
Looking forward to the clear tanks...I hate not being able to see how much juice is left.
I'm back, Tractor Supply does have the Ideal 12ml
Yup...that's the one. I got mine from TS as well. I guess I should have mentioned that. Fits perfectly, huh?
For those having wicking problems...the wick should not be tight in the hole. Instead of just rolling it really tight to make it fit loosely, pull it to stretch the wick lengthwise while you're rolling it. That will help get the diameter smaller without the wick being overly tight. You want it to be kinda like a straw. If you had to cut your wick to length make sure you don't leave it "crimped" at the point of the cut so as to keep the straw like properties. You should not have to resort to leaving out the fill screw (toothpick is way easier btw).
For the record: Polypropylene, Polycarbonate (aka Lexan), and Polymethyl Methacrylate (aka PMMA or Acrylic) are three different plastics, with quite different properties regarding resistance to organic solvents and other factors.
Last edited:
Still cutting with a push mower. Sadly, it's about the only exercise I get.
I'm definately in for a couple more Griffins, some clear tubes, and extra top caps and orings.
Depends on the manufacturer - A 10ml BD syringe won't work, while I've read that other manufacturer's 10mls will. The 12ml Ideal Instruments & Monoject syringes will work.
I went and got a 10 ml ..mmm does not fit
- Status
Similar threads
- Locked
