Introducing the NEW Vapeonly 3.5ml BCC MEGA Bottom Coil Changeable Tank- In All Colors

[badkolo]

Tell us more about this wick strand removal, Bad. What exactly did you do?

look at wick area, it looks like one bunched up wick but its actually 4, use tweezers to grab onto a few strands which will pull out 1 wick when you snag it out. this will allow for more types of thicker juices to flow through, i even tried thin juice and its amazing, no leaking, you can do the same with t3's etc.

 

[kellie]

I just got my purple with black today. Filled her right up with no issues and took a few primer puffs and it is awesome. If it keeps working like this it is defiantly a keeper for me. The flavor and vapor is great so far

 

[orbach]

Trying out my Vapeonly just now. Filled about 2.3ml with 100% VG juice. The 2.2 ohm installed heads measured 2.3ohm and vaping at about 4v on a 650mah Spinner. I must say, this is da bomb!! I think it will replace the Titan as my all around favorite if it holds up. Love how light it feels on my 650mah Spinner. I am getting a negligible leak on the 510 threads which means it must be leaking through the vent holes right above the threads, but it is a very small leak and nothing to worry about. Clouds of vapor, fantastic taste, hardly any leaks, easy to fill and light in weight. What else can you ask for? O yes, maybe a round tip instead of the whistle tip, but I can get used to it. The marble drip tip I have does fit but a little loose. The whistle tip has a thicker o-ring so it is very tight, so like others have suggested a little teflon tape should do the trick. The ink used for the tank ml scale should be white on a clear tank. It is black and rather unreadable, even with my reading glasses on. But I can read it perfectly with my magnifying glass !

P.S. I am chain vaping 100%VG juice with no wicking problems. Down to 1.4ml. Will see what happens below 1ml and report back.

 

[badkolo]

orbach when its empty, take it apart, put it back together and make sure its all snug, then blow through it , then fill and vape, you shouldnt have any issues

 

[orbach]

I did that before filling it the first time, just to be sure. But will do it again to be sure x 2, lol. Thanks!

orbach when its empty, take it apart, put it back together and make sure its all snug, then blow through it , then fill and vape, you shouldnt have any issues

 

[orbach]

OK, finished the tank and it vaped the whole thing. No idea why they say you should have a minimum of 1 ml in the tank. It vaped it so dry that when I took off the bottom to refill not one drop spilled out (i did wait until I got a definitive dry hit). The leak went away as I vaped the last ml in the tank. I just refilled in full and am getting no leaks at all. I didn't readjust the head as badkolo recommended as it had already stopped leaking. I cannot rule out that the battery threads had some juice in them and it simply transferred over to the BCC Mega's threads as I did not clean the battery beforehand. This is an outstanding unit and my favorite so far. Let's see how it stands up to use over the next weeks.

 

[Hallmf66]

OK SOOO... "Vapeonly BCC"...."Kanger EVOD MT BCC" ....and the "Kanger M-T3".... who thinks what is the best and why? These all BASICALLY seem the same to be besides the obvious differences (Vapeonly). And I cant tell a difference between the EVOD and the M-T3. So that adds to the confusion. BUT Basically, its gonna come down to which one of these new guys is performing and holding up the best?

 

[WallyO]

The Kanger Pro Vape.

 

[trevor148]

look at wick area, it looks like one bunched up wick but its actually 4, use tweezers to grab onto a few strands which will pull out 1 wick when you snag it out. this will allow for more types of thicker juices to flow through, i even tried thin juice and its amazing, no leaking, you can do the same with t3's etc.

Careful when doing this with a t3 I did it last night and it leaked on me.

 

[AG51]

The Kanger Pro Vape.

Yes Please I want a dozen

 

[orbach]

Do you mean the Kranger Pro Tank with the glass tube?

I'm loving the Vapeonly BCC Mega.

The Kanger Pro Vape.

 

[WallyO]

Do you mean the Kranger Pro Tank with the glass tube?

I'm loving the Vapeonly BCC Mega.

Yup, that be da one.

 

[orbach]

Will give it a shot too. If it vapes as good as the Vapeonly then it will be better because of the glass tank. That will make it heavy though and I really like how light the Vapeonly is. Just thinking out loud, if you will.

Edit: Wait! They haven't dropped yet. Have you actually tried one?

Yup, that be da one.

 

[midnight_stray]

Has anyone tried using higher VG juices with consistent luck?

 

[orbach]

I'm using 100% VG but have only vaped two tankfuls on my new Vapeonly BCC Mega. So far, it is excellent.

 

[2nd chance]

Been using mine for a few days now, It has replaced all my others, I love this but will also be interested in the Kanger Pro
I also wish they would have made the opening for the tips slightly smaller and I am going to try to rig a condum inside the hole to snug my tip in...(wow that sounded interesting)

 

[orbach]

Found a problem with the Vapeonly BCC Mega. It started gurgling and was getting some juice into my mouth. Took the tip off and when I looked inside the socket for the tip I saw quite a bit of juice there, maybe one or two good drops. I cleaned it with a q tip, put the tip back on and the gurgling was much less. So, how did all that juice get up there???

I took the tip off again, cleaned the cavity and vaped without the tip. I could then feel the micro drops of sizzling juice hitting my tongue. I was vaping then at around 4.4v which caused the juice to sizzle and shoot up many tiny droplets which ended up accumulating in the drip tip socket. When enough juice piles up in there then it begins to gurgle a lot.

I cleaned the cavity again and put the drip tip back. This time I vaped at 3.3v, producing less vapor. I vaped for a while taking the tip off and looking in the cavity and noticed much less accumulation of juice. I vaped at this voltage without the tip and although I still could feel an occasional sizzling droplet hit my tongue, they were much less in frequency.

The Vapeonly seems to have a problem vaping hotter which may only be avoidable by lowering the current (i.e. voltage) to the point where the juice doesn't splatter as much up the vent tube. Unfortunately, at this lower current it doesn't vape as well.

I made a crude measurement of the depth of the drip tip well/socket using a small eyeglass screwdriver and it seems the drip tip is about 1/16 inch too short. It is in this 1/16 inch space between the bottom of the drip tip socket and the bottom of the drip tip that the juice accumulates. I'll keep playing with this to see if there is some fix. It looks like it needs a longer drip tip that will sit flush with the air vent (bottom of drip tip socket) or some kind of gasket that fills that 1/16 inch gap. I want this unit to work!!

That's it for now.

Edit: Lucky I saved the Phoenix Reborn rubber tip. This one seems to be able to go all the way in and seal around the vent tube, not 100% sure but it sure feels like it does. It is nice and snug. Will refill the tank and give it a go around and see what happens.

 

[Hallmf66]

Now what the hell is a kanger pro vape? All these new kanger tanks and they all seem the exact same...

 

[Hallmf66]

Damn!! All this great news about the vapeonly and now this gurgling problem... I know that problem all too well.. I had a couple nova tanks that did exactly what u are talking about (splattering hot little juice droplets at my tounge) .. Horrible experience and def don't want a tank with this problem. Hopefully you find out what caused it, maybe it's just a fluke?

 

[Hallmf66]

My current set up: smoov rev 1300 with the nova. Gonna be hard to beat how good this looks