is .04 ohm safe

[Dom]

Im new at building and usually build at .8 to 1.8. I have a Lemo 2 and used 28 wire on first try and w/ 5 wraps it was 1.8 Using the wire it came w/ (doesn't specify gauge but its a lot thicker) at five wraps it came out at .4 Im using an eleaf istick 30w. If it is safe then what is not? Any idea what gauge wire comes w/ Lemo2? My coil looked beautiful. Best one yet.

 

[notactuallyluke]

First let's clarify, 0.4, or 0.04? Big difference! The istick is limited to a .4 resistance, so you should be ok there.

 

[Dom]

yes it is .4 couldnt edit title. Thanks. I wont go any lower.

 

[Cullin Kin]

Thank goodness you meant 0.4Ω... You should still be able to change the title by clicking the drop down arrow thingy near it.

 

[Wraith504]

 

[notactuallyluke]

yes it is .4 couldnt edit title. Thanks. I wont go any lower.

Do you have an ohms reader by any chance? The istick has a pretty good one, but never hurts to check before putting it on.

 

[Dom]

No i don't but its on my list of things to get. I have my eye on this baby. Coil Master DIY Kit - Coil Master

 

[MCCOY300]

I would go with an ohm reader before a coil jig. While the coil master will help you for a little bit at first, once you get the hang of it you will end up wrapping coils on screwdrivers or whatever is laying around.

 

[Cacique]

The kit he links comes with an ohm meter along with other tools. It's a rebuilders kit they make with their coil master. If you ended up buying an ohm meter by itself, I highly recommend USA Ohm meters.