Is my air hole to loose/tight? Kayfun ehpro

[grrmisfit]

Using pinup girl betty 75 vg and I just can't seem to dial it in on wattage.. single coil at 1.6 ohms 28g kanthal. It seems taste is hit or miss but sometimes if I cover air hole take a no power hit then a powered hit I get flavor. Currently go between 8-10 watts

 

[MrPlink]

Looser airflow means less pressure which COULD mean dry hits.
However I have no issues running 100vg in a kayfun.

Sounds like a build/wicking problem to me.

More than likely you need to adjust the position of your wick and/or use a different amount of it.

Also plausible your juice channels are not milled correctly.

 

[grrmisfit]

I've never had a big draw, matter of fact my previous tank was the nautilus and I ran it on smallest air hole. I tightened the air hole down and it seems to be doing better. Im sure it's a matter of trial and error.

 

[desertrider]

Remember the most common issue with Kayfuns is too much cotton. There have been times I thought ok this isnt nearly enough...but Ill try it. BAM! Perfect vape.

 

[b.m.]

Remember the most common issue with Kayfuns is too much cotton. There have been times I thought ok this isnt nearly enough...but Ill try it. BAM! Perfect vape.

I went through this for the first 3 days after getting my kayfun.Another member here kept giving me advice and tips,and i finally got it.Like you,i was putting what i thought was too small,then i would get a burnt hit after just a few minutes.Pull the cotton,put in more,still thinking it was not enough,so i would try more,thinking maybe it wasn't touching the coil,worse burnt taste.That's when the other member stepped in and guided me through the whole setup,and finally with what i thought was way too small and would never work,turned out to be perfect,great taste,no gurgles,no leaks,just perfect haha.

 

[crxess]

Please view my Blog to get an understanding of clean wicking to allow good liquid flow without flooding/dry hits.

Maybe it will help out.





<<<<<<<<<<<,Blog