Is my cartomizer a dud?

Status
Not open for further replies.

TigerLadyTX

Super Member
ECF Veteran
Verified Member
Feb 16, 2012
932
911
Garland, TX
Try pulling the post on the carto out a bit. It may not be making connection to the battery. Get a pair of tweezers, or similar item and gently, gently pull the inner part of the post down just an eensy, teensy bit. Then try it on the battery again. If still no sizzle, pull it down a teensy bit more and then retry.. repeat a couple of times if necessary, and then if it STILL does not work, chances are that the carto is a dud.

~Tiger

Nope, no sizzle :( It is a thicker juice (20Pg/80VG), but I've used it in other cartos & had no problem until now. Perhaps I just didn't let it settle enough & it didn't get absorbed properly. I will keep experimenting with it as I hate to toss a carto that isn't really dead.
 

Fiamma

Ultra Member
ECF Veteran
Verified Member
Apr 9, 2012
1,438
1,380
So Calif
Try pulling the post on the carto out a bit. It may not be making connection to the battery. Get a pair of tweezers, or similar item and gently, gently pull the inner part of the post down just an eensy, teensy bit. Then try it on the battery again. If still no sizzle, pull it down a teensy bit more and then retry.. repeat a couple of times if necessary, and then if it STILL does not work, chances are that the carto is a dud.

~Tiger

Concur. Be sure to center it after you pull it out. You do not want it to ground to the sides.
 
Status
Not open for further replies.

Users who are viewing this thread