Is this in line with the standard addiction?... Plus 1st coil build

[DisKid]

So I started vaping about a month ago and caught a bit of the "ooooh...shiny" bug...

Here is my collection along with a Nemesis clone with a kayfun Lite clone atty... My first coil build coming in at 1.3 ohm. Haven't figured out if that's good or bad yet but I think I could use more juice..

Sent from my Droid to the Maxx

 

[Ryan1888]

Totally normal. You should see the amount of devices some of the members have, here on ECF.

 

[DisKid]

Totally normal. You should see the amount of devices some of the members have, here on ECF.

Ok good because my girl says I have a problem LMAO!

 

[DisKid]

Is 1.3 ohm decent? I have a 3/4 coil but unsure of the gauge that came with my Neme clone. Any suggestions on improvements? I know, I know.. I still have research to do on the forum but opinions always welcome

 

[nova_did_it]

Many of us here get the "ooh shiny bug", myself included. You're set up is awesome! Yep totally normal.. back ups for your back ups.. you are all good!

 

[nova_did_it]

Another way you could think of it.. is.... instead of throwing out cigarette butts you are collecting shiny toys! That is... if you were a former smoker.

 

[DisKid]

The Neme clone has a bit of a powder taste to it if that makes any sense... not sure what's causing that. Kinda like licking a powered medical glove.

Anyone know what the clear tank is made of for the Neme clone? it's not really clear. Just curious if it was safe with all juice? I'm guessing it's not but putting some Space Jame Robo Fuel Andromeda through it now which I asked and they claim all their juices are safe for plastic.

 

[DisKid]

Many of us here get the "ooh shiny bug", myself included. You're set up is awesome! Yep totally normal.. back ups for your back ups.. you are all good!

Thank you sir! I think I'm done for the moment Now I'll be playing with coil building... along with another Vodka martini.. dirty.. since I'm on vaca until Tuesday.. woohoo! Great Friday... 3 shipments of vapemail in one day!

 

[WindyCityJoe]

Nice collection, they seem to multiply overnight don't they?

 

[Huckleberried]

Just a bit of the "oohh shiny" bug. I did my first coil build, too. Feels good, huh? I like your shinies!

I do see ONE problem.... they're all empty

 

[DisKid]

Nice collection, they seem to multiply overnight don't they?

Dear lord they do.. and my girl was complaining because I got her a Evod starter kit and a day later she decided she liked my VV/VW better... I had to buy her a iTaste MVP to get her off my back lol. Now she leaves me alone haha

 

[DisKid]

Just a bit of the "oohh shiny" bug. I did my first coil build, too. Feels good, huh? I like your shinies!

What ohm did yours come in at? I'm actually researching now to see how to make it better. 1.3 is nice but I'm not getting the vapor production I was expecting.. I think I'll look into cotton and different gauge now.. Yes does feel good.. Less intimidating than I thought it would be.

 

[DisKid]

Just an FYI.. the drip tip on the iTaste MVP was designed by me and created in titanium by Ohman... great work.. Thanks again.

 

[DisKid]

Just a bit of the "oohh shiny" bug. I did my first coil build, too. Feels good, huh? I like your shinies!

I do see ONE problem.... they're all empty

Good call.. filling them all now!

 

[Huckleberried]

Just an FYI.. the drip tip on the iTaste MVP was designed by me and created in titanium by Ohman... great work.. Thanks again.

I noticed the drip tips. Definitely nice. I used 32g kanthal. The microcoil with like 11 wraps turned out at 4.0 lol. Tried it but I'll probably try again, fewer wraps. My simple coil, like on a protank head, came in at 2.3, with 6 wraps. That ones really good.

 

[DisKid]

I noticed the drip tips. Definitely nice. I used 32g kanthal. The microcoil with like 11 wraps turned out at 4.0 lol. Tried it but I'll probably try again, fewer wraps. My simple coil, like on a protank head, came in at 2.3, with 6 wraps. That ones really good.

I picked up some 32g as well for rebuilding my Protank coils. Now I gotta figure out if I need to go higher or lower with ohms. Time for some searching I know I had other things to do today but this seems like more fun.

 

[nova_did_it]

Thank you sir! I think I'm done for the moment Now I'll be playing with coil building... along with another Vodka martini.. dirty.. since I'm on vaca until Tuesday.. woohoo! Great Friday... 3 shipments of vapemail in one day!

Building coils is a lot of fun. I've rebuilt most of my kanger coils now and they all sit around 1.7 - 2.2 ohms which is my sweet spot. I find good silica makes all the difference in the world on how the juice tastes when done. Cotton hasn't worked out so well for me yet, but many people swear by them! All you got to do is keep building until you find a coil build you like. I used 32 gauge wire and 2mm silica. I also like ekowool too! holds lots of juice.

 

[Huckleberried]

Building coils is a lot of fun. I've rebuilt most of my kanger coils now and they all sit around 1.7 - 2.2 ohms which is my sweet spot. I find good silica makes all the difference in the world on how the juice tastes when done. Cotton hasn't worked out so well for me yet, but many people swear by them! All you got to do is keep building until you find a coil build you like. I used 32 gauge wire and 2mm silica. I also like ekowool too! holds lots of juice.

I used 2.5 silica. I tried cotton, but didn't care for it. Only the one time though. I'm still in the learning phase. I really like DisKid's set up o'stuffs.

 

[Ryan1888]

I feel that 32g is a little too thin for my personal preference. Try out a 4 wrap of 30g kanthal. Should get you where you want to be.
As for the vapor production - that's really dependent on airflow as well.

 

[DisKid]

Just tried a 4 wrap and got it at 2ohm.. unfortunately I spilled some of my Andromeda.. So not cool.